CNC 3axis PEEK for Medical

CNC 3axis · PEEK · Medical — Batch1 combo cnc-3axis/peek/medical.

Combination notes

Among Medical projects, this page is the cnc-3axis × peek × medical route for PEEK. Applied to medical: Three-axis CNC mills planar pockets, drilled holes, and prismatic profiles with a single setup on the primary face. Contoured undercuts that need simultaneous multi-axis toolpaths are out of scope for this variant and should move to five-axis or a second setup. For Medical material choice PEEK: PEEK is a high-temperature polymer for medical and semiconductor fixtures where metals would short or corrode. Anodize, passivate, and plating are excluded; rates allow bead blast, polish, and powder coat only. Medical fixtures and instrument prototypes emphasize cleanability and biocompatible alloys (stainless, Ti, PEEK). Passivate on stainless and careful polymer finish choices matter more than cosmetic color coats. The medical example quote envelope stays 50 × 50 × 20 mm at quantities 1, 10, and 100. Mid prices for this Medical combo come from staging /rates or a priced matrix row—never invented marketing copy.

Industry application notes

For medical programs, CNC 3axis on PEEK is positioned as a subtractive route under URL slug cnc-3axis. Buyers typically upload STEP/IGES with medical-specific datums; this page does not invent a case study or logo for that upload.

Medical instrument fixtures and sterilization trays in PEEK favor cleanable radii and passivate-compatible stainless when applicable. CNC 3axis quotes remain preliminary; biocompatibility dossiers are never fabricated in copy.

Three-axis toolpaths for this medical PEEK combo prefer planar floors and draft-free walls; side undercuts for medical clips need a second fixture that is not priced into the sample mid.

Cross-links on this page point only to other matrix combinations sharing cnc-3axis with different industries or materials—not to fabricated customer stories. Indexing stays gated (noindex while Batch1 preview quality gate applies).

Combo-specific manufacturing notes

Within Medical (medical) programs, note 1: PEEK via CNC 3axis (cnc-3axis) prioritizes cosmetic edge break. Call out thread reliefs before finish specifically for medical buyers using PEEK, before treating rates v1.1 mid as final.

Within Medical (medical) programs, note 2: PEEK via CNC 3axis (cnc-3axis) foregrounds post-process lead stacking. Balloon masked anodize zones when alloy allows specifically for medical buyers using PEEK, before treating rates v1.1 mid as final.

Within Medical (medical) programs, note 3: PEEK via CNC 3axis (cnc-3axis) balances powder-coat edge wrap. Declare escape holes for powder if SLM specifically for medical buyers using PEEK, before treating rates v1.1 mid as final.

Within Medical (medical) programs, note 4: PEEK via CNC 3axis (cnc-3axis) guards corrosion margin. Document second-op datums after roughing specifically for medical buyers using PEEK, before treating rates v1.1 mid as final.

Within Medical (medical) programs, note 5: PEEK via CNC 3axis (cnc-3axis) centers tool-access envelope. Separate inspection balloons on critical OD/ID specifically for medical buyers using PEEK, before treating rates v1.1 mid as final.

Within Medical (medical) programs, note 6: PEEK via CNC 3axis (cnc-3axis) anchors passivate coverage. Capture packaging notes for cosmetic faces specifically for medical buyers using PEEK, before treating rates v1.1 mid as final.

Within Medical (medical) programs, note 7: PEEK via CNC 3axis (cnc-3axis) isolates thermal path. Freeze torque patches on soft alloys specifically for medical buyers using PEEK, before treating rates v1.1 mid as final.

Within Medical (medical) programs, note 8: PEEK via CNC 3axis (cnc-3axis) emphasizes vacuum face cleanliness. Schedule keep-out for five-axis holders specifically for medical buyers using PEEK, before treating rates v1.1 mid as final.

Within Medical (medical) programs, note 9: PEEK via CNC 3axis (cnc-3axis) weights anodize thickness stackup. Annotate steady-rest notes on slender turns specifically for medical buyers using PEEK, before treating rates v1.1 mid as final.

Within Medical (medical) programs, note 10: PEEK via CNC 3axis (cnc-3axis) sequences mass budget. Lock HIP/heat-treat flags when rates list batch adders specifically for medical buyers using PEEK, before treating rates v1.1 mid as final.

Within Medical (medical) programs, note 11: PEEK via CNC 3axis (cnc-3axis) prioritizes cable egress. Call out thread reliefs before finish specifically for medical buyers using PEEK, before treating rates v1.1 mid as final.

Within Medical (medical) programs, note 12: PEEK via CNC 3axis (cnc-3axis) foregrounds support survivor ribs. Balloon masked anodize zones when alloy allows specifically for medical buyers using PEEK, before treating rates v1.1 mid as final.

Within Medical (medical) programs, note 13: PEEK via CNC 3axis (cnc-3axis) balances fixture stiffness. Declare escape holes for powder if SLM specifically for medical buyers using PEEK, before treating rates v1.1 mid as final.

Within Medical (medical) programs, note 14: PEEK via CNC 3axis (cnc-3axis) guards bearing bore stack. Document second-op datums after roughing specifically for medical buyers using PEEK, before treating rates v1.1 mid as final.

Within Medical (medical) programs, note 15: PEEK via CNC 3axis (cnc-3axis) centers chip evacuation. Separate inspection balloons on critical OD/ID specifically for medical buyers using PEEK, before treating rates v1.1 mid as final.

Within Medical (medical) programs, note 16: PEEK via CNC 3axis (cnc-3axis) anchors polish lay direction. Capture packaging notes for cosmetic faces specifically for medical buyers using PEEK, before treating rates v1.1 mid as final.

Within Medical (medical) programs, note 17: PEEK via CNC 3axis (cnc-3axis) isolates cosmetic edge break. Freeze torque patches on soft alloys specifically for medical buyers using PEEK, before treating rates v1.1 mid as final.

Within Medical (medical) programs, note 18: PEEK via CNC 3axis (cnc-3axis) emphasizes post-process lead stacking. Schedule keep-out for five-axis holders specifically for medical buyers using PEEK, before treating rates v1.1 mid as final.

Within Medical (medical) programs, note 19: PEEK via CNC 3axis (cnc-3axis) weights powder-coat edge wrap. Annotate steady-rest notes on slender turns specifically for medical buyers using PEEK, before treating rates v1.1 mid as final.

Within Medical (medical) programs, note 20: PEEK via CNC 3axis (cnc-3axis) sequences corrosion margin. Lock HIP/heat-treat flags when rates list batch adders specifically for medical buyers using PEEK, before treating rates v1.1 mid as final.

Within Medical (medical) programs, note 21: PEEK via CNC 3axis (cnc-3axis) prioritizes tool-access envelope. Call out thread reliefs before finish specifically for medical buyers using PEEK, before treating rates v1.1 mid as final.

Within Medical (medical) programs, note 22: PEEK via CNC 3axis (cnc-3axis) foregrounds passivate coverage. Balloon masked anodize zones when alloy allows specifically for medical buyers using PEEK, before treating rates v1.1 mid as final.

Within Medical (medical) programs, note 23: PEEK via CNC 3axis (cnc-3axis) balances thermal path. Declare escape holes for powder if SLM specifically for medical buyers using PEEK, before treating rates v1.1 mid as final.

Within Medical (medical) programs, note 24: PEEK via CNC 3axis (cnc-3axis) guards vacuum face cleanliness. Document second-op datums after roughing specifically for medical buyers using PEEK, before treating rates v1.1 mid as final.

Within Medical (medical) programs, note 25: PEEK via CNC 3axis (cnc-3axis) centers anodize thickness stackup. Separate inspection balloons on critical OD/ID specifically for medical buyers using PEEK, before treating rates v1.1 mid as final.

Within Medical (medical) programs, note 26: PEEK via CNC 3axis (cnc-3axis) anchors mass budget. Capture packaging notes for cosmetic faces specifically for medical buyers using PEEK, before treating rates v1.1 mid as final.

Within Medical (medical) programs, note 27: PEEK via CNC 3axis (cnc-3axis) isolates cable egress. Freeze torque patches on soft alloys specifically for medical buyers using PEEK, before treating rates v1.1 mid as final.

Within Medical (medical) programs, note 28: PEEK via CNC 3axis (cnc-3axis) emphasizes support survivor ribs. Schedule keep-out for five-axis holders specifically for medical buyers using PEEK, before treating rates v1.1 mid as final.

Medical lexicon 1: when machining or printing PEEK on cnc-3axis, watch the sterile field region so medical assembly clearances survive finishing.

Medical lexicon 2: when machining or printing PEEK on cnc-3axis, watch the cannula guide region so medical assembly clearances survive finishing.

Medical lexicon 3: when machining or printing PEEK on cnc-3axis, watch the tray nest region so medical assembly clearances survive finishing.

Medical lexicon 4: when machining or printing PEEK on cnc-3axis, watch the handpiece shell region so medical assembly clearances survive finishing.

Medical lexicon 5: when machining or printing PEEK on cnc-3axis, watch the implant trial region so medical assembly clearances survive finishing.

Process lexicon 1 on cnc-3axis for medical PEEK: the planar floor pocket detail differentiates this variant from sibling CNC/SLM routes on the same alloy.

Process lexicon 2 on cnc-3axis for medical PEEK: the vertical wall stepdown detail differentiates this variant from sibling CNC/SLM routes on the same alloy.

Process lexicon 3 on cnc-3axis for medical PEEK: the drilled pattern from +Z detail differentiates this variant from sibling CNC/SLM routes on the same alloy.

Process lexicon 4 on cnc-3axis for medical PEEK: the single-fixture prismatic detail differentiates this variant from sibling CNC/SLM routes on the same alloy.

Process lexicon 5 on cnc-3axis for medical PEEK: the 2.5D contour detail differentiates this variant from sibling CNC/SLM routes on the same alloy.

Drawing checklist

Buyer-side checklist for this process × material × industry trio. Not a certified DFM pack.

Title block: mark process intent as CNC 3axis (cnc-3axis) and material as PEEK.
Datum scheme: define medical mating faces before tightening tolerances beyond ISO 2768-m.
Finish callout: pick only from the rates-compatible list on this page; do not write anodize on non-aluminum PEEK.
Qty breaks: sample widget uses 1 / 10 / 100; production MOQ dollars follow rates min_order when commercial review runs.
Files: STEP plus PDF for medical; no certificate upload is implied by this SEO page.

Example quote

50 × 50 × 20 mm

process CNCvariant 3axisPEEKrates v1.1source api

Qty	price	lead_days
1	$80 ($70.4–$89.6)	awaiting rates API
10	$188.6 ($166–$211.3)	awaiting rates API
100	$1068.5 ($940.3–$1196.8)	awaiting rates API

Preliminary cnc-3axis/PEEK mid from api v1.1; not a confirmed order price.

Material data

For medical buyers of PEEK on cnc-3axis, density / tensile / hardness / thermal conductivity stay unknown until the materials API verifies them. No invented property numbers are shown for this Medical combination.

Process / capability specs

Capability and commercial parameters from rates.v1 for cnc-3axis / PEEK / medical. Hourly and lead-day figures are rate-card inputs, not a promised schedule for a specific medical drawing.

On cnc-3axis / PEEK / medical, spec process_slug is cnc-3axis per rates.v1 mapping for medical work.
On cnc-3axis / PEEK / medical, spec process_enum is CNC / 3axis per rates.v1 mapping for medical work.
On cnc-3axis / PEEK / medical, spec material_id is PEEK per rates.v1 mapping for medical work.
On cnc-3axis / PEEK / medical, spec industry is medical per rates.v1 mapping for medical work.
On cnc-3axis / PEEK / medical, spec tolerance_default is ISO 2768-m per rates.v1 mapping for medical work.
On cnc-3axis / PEEK / medical, spec MOQ_per_line_usd is 50 per rates.v1 mapping for medical work.
On cnc-3axis / PEEK / medical, spec MOQ_per_order_usd is 80 per rates.v1 mapping for medical work.
On cnc-3axis / PEEK / medical, spec rates_version is v1.1 per rates.v1 mapping for medical work.
On cnc-3axis / PEEK / medical, spec cnc_hourly_usd is 25 per rates.v1 mapping for medical work.
On cnc-3axis / PEEK / medical, spec cnc_setup_once_usd is 30 per rates.v1 mapping for medical work.
On cnc-3axis / PEEK / medical, spec cnc_lead_days_standard is 7–12 days per rates.v1 mapping for medical work.
On cnc-3axis / PEEK / medical, spec stock_allowance_mm_per_side is 3 per rates.v1 mapping for medical work.
On cnc-3axis / PEEK / medical, spec sample_bbox_mm is 50 × 50 × 20 per rates.v1 mapping for medical work.

Typical parts

No typical Medical parts are loaded for this cnc-3axis / peek combination. Part examples stay empty until the staging catalog provides them.

DFM

Design for manufacturability notes tied to this process, material, and industry. Wall thickness and geometry limits that are not in rates stay unlabeled rather than guessed.

medical stock allowance. For Medical PEEK CNC, rates.v1 stock_allowance_mm_per_side is 3 mm per side before finish machining.
medical default tolerance. On medical drawings for PEEK, rates.v1 default tolerance is ISO 2768-m unless tighter ±0.05 / ±0.025 uplifts apply.
3-axis access. Design Medical pockets so a 3-axis tool can reach from one primary face; deep side undercuts for PEEK need a second setup or five-axis.
Polymer finishing. PEEK excludes anodize / passivate / plate in the rates compatibility filter. Use bead blast, polish, or powder coat only when the Medical drawing allows.
DFM source. Full quote-engine DFM rule packs are not loaded yet. Items above cite rates.v1 parameters and process/material compatibility only—no fabricated customer DFM claims.

Finishes

Surface finish options priced in rates v1.1 finishes_usd_per_part for cnc-3axis × PEEK × medical. Incompatible finishes are filtered out for this material. Unit prices are USD per part adders for the medical use case, not a full order quote.

For cnc-3axis × PEEK × medical, Bead Blast (bead_blast) adds $5 USD per part with no batch minimum in rates from rates v1.1 finishes_usd_per_part.
For cnc-3axis × PEEK × medical, Powder Coat (powder_coat) adds $12 USD per part with no batch minimum in rates from rates v1.1 finishes_usd_per_part.
For cnc-3axis × PEEK × medical, Polish (polish) adds $15 USD per part with no batch minimum in rates from rates v1.1 finishes_usd_per_part.

Cases

No published Medical case is linked to cnc-3axis peek. Customer names, logos, and certifications are not invented.

Other industries for this material

Other materials for this industry

Questions

What example part is used for CNC 3axis in PEEK for Medical?

One envelope, 50 × 50 × 20 mm, at quantities 1, 10, and 100 for the cnc-3axis/peek/medical combination. Mid unit prices show when staging /rates or a priced matrix row supplies them (rates v1.1). Lead-day card values from rates: 7–12 days. This is not a confirmed quote.

Are PEEK (PEEK) properties published for CNC 3axis?

Density, tensile strength, hardness, and thermal conductivity cells stay unknown until the materials API verifies them for PEEK. Process specs on this page still show rates.v1 tolerance ISO 2768-m and MOQ per line USD 50.

Which finishes are priced for CNC 3axis PEEK in Medical?

From rates v1.1 finishes_usd_per_part, filtered for PEEK: Bead Blast $5/part; Powder Coat $12/part; Polish $15/part. Incompatible finishes (for example anodize on polymers or stainless) are omitted rather than shown as available.

How does CNC 3axis suit Medical with PEEK?

Is there a published Medical case for this cnc-3axis peek combination?

No case is linked. Cases come from the case library when a real match exists. Customer names, logos, and certifications are not added as placeholders.