CNC lathe for Automation
Factory automation hubs focus on end-of-arm tooling plates, sensor brackets, conveyor wear parts, and modular fixture elements that change often as lines evolve. Duty cycles favor robust mild steel or aluminum with practical finishes, and polymer wear pads appear where friction matters. This page highlights application patterns and why qty10 bands span multiple stock types — leaving deep process essays to material hubs.
Batch1 industry automation.
Process
CNC turning for revolved OD/ID parts serving this industry — use the industry overlay for applications and material mix; lathe capability essays belong on material hubs.
When automation uses this route
- EOAT plates and gripper fingers iterated during line bring-up
- Sensor and vision camera mounts needing repeatable datums
- Conveyor guides and wear strips in POM or metals
- Modular fixture towers shared across product variants
- Low-to-mid volume spares where tooling castings are overkill
Typical parts
- End-of-arm tooling adapter plates
- Photoeye and lidar brackets
- Locating pins, bushing blocks, and wear pads
- Pneumatic manifold plates for cell control
- Guard hinges and latch hardware prototypes
Industry DFM
- Slot patterns for T-nuts need consistent spacing from the automation standard you use
- Hard anodize or plating only where the material leaf supports it
- Thin EOAT plates flex under clamp loads — check stiffness before lightening holes
- POM wear parts need thermal control during machining to hold fits
- Cable-clearance cutouts can leave knife edges — specify breaks
Material mix
DFM on industry hubs is application-framed (environment, sealing, weight, cleanability, thermal path). Do not paste the full process capability essay or the material-hub alloy DFM list verbatim.
Industry hub bands aggregate across child materials. Qty10 mid often sits between soft aluminum floors and higher titanium/stainless/PEEK leaves — explain the span as a material mix, not as a fake “industry surcharge.” Never invent dollar deltas beyond hub_price_ranges.json.
One-liner only: revolved OD/ID turning. Defer L/D chucking essays to material hubs.
Public price range
Aggregated from Batch1 child leaves for this hub (5 pages). USD, rates v1.1, public ±12% on the 50×50×20 mm sample. Compare qty 10 $117.92 ($70.4–$211.27); qty 100 $597.1 ($244.95–$1196.76).
| Qty | Low | Mid | High | Status | Leaves priced | Lead days |
|---|---|---|---|---|---|---|
| 1 | $70.4 | $80 | $89.6 | priced | 5 | 7–12 (mid 10) |
| 10 | $70.4 | $117.92 | $211.27 | priced | 5 | 7–12 (mid 10) |
| 100 | $244.95 | $597.1 | $1196.76 | priced | 5 | 7–12 (mid 10) |
| 500 | $1150.83 | $2328.18 | $4205.03 | mixed | 4 | 7–12 (mid 10) |
Automation children mix aluminum floors with steel and polymer leaves; qty10 mid is an aggregate — see hub_price_ranges, not a made-up automation fee. Industry hub bands aggregate across child materials. Qty10 mid often sits between soft aluminum floors and higher titanium/stainless/PEEK leaves — explain the span as a material mix, not as a fake “industry surcharge.” Never invent dollar deltas beyond hub_price_ranges.json. Some child leaves are mixed, so a band uses only children that published a number. Not a confirmed order price.
Process comparison
Qty 10 public mid is the median of process×material hub mids, with the span of those mids in parentheses. Tolerance labels and finish names come from the hubs-enrich pack. The machine-rate column is the rates card, not a part price.
| Process | Qty 10 price band | Tolerance | Finishes | DFM | Machine rate |
|---|---|---|---|---|---|
| CNC 3-axis (CNC 三轴) | $117.92 median ($80–$290.74) | ISO 2768-m; ±0.05 mm; ±0.025 mm; tighter needs manual | 8: Bead Blast, Powder Coat, Polish, Nickel/Zinc Plate, Anodize, Hard Anodize, Black Oxide, Passivate | On 3-axis mills, walls thinner than 0.8 mm (2V/A proxy) chatter and deflect under end-mill load — thicken or add ribs before quoting as production. | $25/h, setup $30 |
| CNC 5-axis (CNC 五轴) | $117.92 median ($80–$290.74) | ISO 2768-m; ±0.05 mm; ±0.025 mm; tighter needs manual | 8: Bead Blast, Powder Coat, Polish, Nickel/Zinc Plate, Anodize, Hard Anodize, Black Oxide, Passivate | 5-axis simultaneous moves need clearance for spindle/holder; long stick-out past thin walls under 0.8 mm risks collision and chatter — shorten tools or thicken local stock. | $55/h, setup $60 |
| CNC Turning (CNC 车削) | $117.92 median ($80–$290.74) | ISO 2768-m; ±0.05 mm; ±0.025 mm; tighter needs manual | 8: Bead Blast, Powder Coat, Polish, Nickel/Zinc Plate, Anodize, Hard Anodize, Black Oxide, Passivate | Turned bars with length/diameter above ~3–4× without a tailstock or steady rest chatter; thin tubular walls under 0.8 mm amplify ovality under chuck pressure. | $22/h, setup $20 |
| SLM / DMLS (SLM / DMLS) | $4022.82 median ($2800.17–$4177.43) | ISO 2768-m; tighter needs manual | 8: Bead Blast, Powder Coat, Polish, Nickel/Zinc Plate, Black Oxide, Passivate, Anodize, Hard Anodize | SLM thin-wall proxy under 0.8 mm (same threshold family as CNC) risks incomplete melt tracks and warp — thicken or orient flat to plate. | $45/h, support removal min $15/part |
Child materials under automation usually cover aluminum, steels, brass, and polymers used on the cell — select by drawing alloy.
Child pages
Questions
What price does CNC lathe for Automation show?
Automation children mix aluminum floors with steel and polymer leaves; qty10 mid is an aggregate — see hub_price_ranges, not a made-up automation fee. Aggregate across 5 Batch1 materials: qty 10 mid $117.92 ($70.4–$211.27); qty 100 mid $597.1 ($244.95–$1196.76) (USD, public ±12%, rates v1.1). Open a material child for one alloy. Nothing is invented. This hub is authorized for index, follow (not a ranking claim).
Are typical Automation parts listed?
Named production parts are not in the hubs-enrich pack. The page lists DFM one-liners and Batch1 material children for this industry. Empty means not loaded.
When can this page be indexed?
Not from this pack. SPEC §15.1 keeps process hubs index, follow, and out of the sitemap even when indexable_hint is props_ready. Indexing stays a quality-gate decision on combination pages.