CNC lathe Brass C360 for Robotics

Combination notes

Among Robotics projects, this page is the cnc-turning × brass-c360 × robotics route for Brass C360. Applied to robotics: CNC lathe (turning) produces concentric diameters, threads, grooves, and short shafts from bar or blank stock. Live-tool cross holes are available when programmed; deep off-axis sculpting is better on a mill. For Robotics material choice Brass C360: Brass C360 turns and mills freely for fittings, thermal contacts, and RF-adjacent hardware. Anodize does not apply to brass; bead blast, polish, powder coat, and nickel/zinc plate remain on the rates finish list. Robotics end-effectors and gearbox housings mix stiffness with cable clearances. Five-axis or turning helps concentric bearing bores; aluminum anodize improves wear on sliding covers when the material is aluminum. The robotics example quote envelope stays 50 × 50 × 20 mm at quantities 1, 10, and 100. Mid prices for this Robotics combo come from staging /rates or a priced matrix row—never invented marketing copy.

Industry application notes

For robotics programs, CNC lathe on Brass C360 is positioned as a subtractive route under URL slug cnc-turning. Buyers typically upload STEP/IGES with robotics-specific datums; this page does not invent a case study or logo for that upload.

Robotics wrist housings and reducer adapters in Brass C360 mix bearing bores with cable labyrinths. CNC lathe helps when the robotics CAD keeps tool access honest; harmonic-drive interfaces must come from the customer model.

Turning-centric robotics parts in Brass C360 should keep OD/ID stacks concentric; cross-drilled robotics ports via live tools are optional and may move the job toward mill-turn review.

Cross-links on this page point only to other matrix combinations sharing cnc-turning with different industries or materials—not to fabricated customer stories. Indexing stays gated (noindex while Batch1 preview quality gate applies).

Combo-specific manufacturing notes

Within Robotics (robotics) programs, note 1: Brass C360 via CNC lathe (cnc-turning) balances tool-access envelope. Annotate torque patches on soft alloys specifically for robotics buyers using Brass C360 on route /en/cnc-turning/brass-c360/robotics/ (note-id 17993).

Within Robotics (robotics) programs, note 2: Brass C360 via CNC lathe (cnc-turning) guards passivate coverage. Lock keep-out for five-axis holders specifically for robotics buyers using Brass C360 on route /en/cnc-turning/brass-c360/robotics/ (note-id 18090).

Within Robotics (robotics) programs, note 3: Brass C360 via CNC lathe (cnc-turning) centers thermal path. Call out steady-rest notes on slender turns specifically for robotics buyers using Brass C360 on route /en/cnc-turning/brass-c360/robotics/ (note-id 18187).

Within Robotics (robotics) programs, note 4: Brass C360 via CNC lathe (cnc-turning) anchors vacuum face cleanliness. Balloon HIP/heat-treat flags when rates list batch adders specifically for robotics buyers using Brass C360 on route /en/cnc-turning/brass-c360/robotics/ (note-id 18284).

Within Robotics (robotics) programs, note 5: Brass C360 via CNC lathe (cnc-turning) isolates anodize thickness stackup. Declare thread reliefs before finish specifically for robotics buyers using Brass C360 on route /en/cnc-turning/brass-c360/robotics/ (note-id 18381).

Within Robotics (robotics) programs, note 6: Brass C360 via CNC lathe (cnc-turning) emphasizes mass budget. Document masked anodize zones when alloy allows specifically for robotics buyers using Brass C360 on route /en/cnc-turning/brass-c360/robotics/ (note-id 18478).

Within Robotics (robotics) programs, note 7: Brass C360 via CNC lathe (cnc-turning) weights cable egress. Separate escape holes for powder if SLM specifically for robotics buyers using Brass C360 on route /en/cnc-turning/brass-c360/robotics/ (note-id 18575).

Within Robotics (robotics) programs, note 8: Brass C360 via CNC lathe (cnc-turning) sequences support survivor ribs. Capture second-op datums after roughing specifically for robotics buyers using Brass C360 on route /en/cnc-turning/brass-c360/robotics/ (note-id 18672).

Within Robotics (robotics) programs, note 9: Brass C360 via CNC lathe (cnc-turning) prioritizes fixture stiffness. Freeze inspection balloons on critical OD/ID specifically for robotics buyers using Brass C360 on route /en/cnc-turning/brass-c360/robotics/ (note-id 18769).

Within Robotics (robotics) programs, note 10: Brass C360 via CNC lathe (cnc-turning) foregrounds bearing bore stack. Schedule packaging notes for cosmetic faces specifically for robotics buyers using Brass C360 on route /en/cnc-turning/brass-c360/robotics/ (note-id 18866).

Within Robotics (robotics) programs, note 11: Brass C360 via CNC lathe (cnc-turning) balances chip evacuation. Annotate torque patches on soft alloys specifically for robotics buyers using Brass C360 on route /en/cnc-turning/brass-c360/robotics/ (note-id 18963).

Within Robotics (robotics) programs, note 12: Brass C360 via CNC lathe (cnc-turning) guards polish lay direction. Lock keep-out for five-axis holders specifically for robotics buyers using Brass C360 on route /en/cnc-turning/brass-c360/robotics/ (note-id 19060).

Within Robotics (robotics) programs, note 13: Brass C360 via CNC lathe (cnc-turning) centers cosmetic edge break. Call out steady-rest notes on slender turns specifically for robotics buyers using Brass C360 on route /en/cnc-turning/brass-c360/robotics/ (note-id 19157).

Within Robotics (robotics) programs, note 14: Brass C360 via CNC lathe (cnc-turning) anchors post-process lead stacking. Balloon HIP/heat-treat flags when rates list batch adders specifically for robotics buyers using Brass C360 on route /en/cnc-turning/brass-c360/robotics/ (note-id 19254).

Within Robotics (robotics) programs, note 15: Brass C360 via CNC lathe (cnc-turning) isolates powder-coat edge wrap. Declare thread reliefs before finish specifically for robotics buyers using Brass C360 on route /en/cnc-turning/brass-c360/robotics/ (note-id 19351).

Within Robotics (robotics) programs, note 16: Brass C360 via CNC lathe (cnc-turning) emphasizes corrosion margin. Document masked anodize zones when alloy allows specifically for robotics buyers using Brass C360 on route /en/cnc-turning/brass-c360/robotics/ (note-id 19448).

Within Robotics (robotics) programs, note 17: Brass C360 via CNC lathe (cnc-turning) weights tool-access envelope. Separate escape holes for powder if SLM specifically for robotics buyers using Brass C360 on route /en/cnc-turning/brass-c360/robotics/ (note-id 19545).

Within Robotics (robotics) programs, note 18: Brass C360 via CNC lathe (cnc-turning) sequences passivate coverage. Capture second-op datums after roughing specifically for robotics buyers using Brass C360 on route /en/cnc-turning/brass-c360/robotics/ (note-id 19642).

Within Robotics (robotics) programs, note 19: Brass C360 via CNC lathe (cnc-turning) prioritizes thermal path. Freeze inspection balloons on critical OD/ID specifically for robotics buyers using Brass C360 on route /en/cnc-turning/brass-c360/robotics/ (note-id 19739).

Within Robotics (robotics) programs, note 20: Brass C360 via CNC lathe (cnc-turning) foregrounds vacuum face cleanliness. Schedule packaging notes for cosmetic faces specifically for robotics buyers using Brass C360 on route /en/cnc-turning/brass-c360/robotics/ (note-id 19836).

Within Robotics (robotics) programs, note 21: Brass C360 via CNC lathe (cnc-turning) balances anodize thickness stackup. Annotate torque patches on soft alloys specifically for robotics buyers using Brass C360 on route /en/cnc-turning/brass-c360/robotics/ (note-id 19933).

Within Robotics (robotics) programs, note 22: Brass C360 via CNC lathe (cnc-turning) guards mass budget. Lock keep-out for five-axis holders specifically for robotics buyers using Brass C360 on route /en/cnc-turning/brass-c360/robotics/ (note-id 20030).

Within Robotics (robotics) programs, note 23: Brass C360 via CNC lathe (cnc-turning) centers cable egress. Call out steady-rest notes on slender turns specifically for robotics buyers using Brass C360 on route /en/cnc-turning/brass-c360/robotics/ (note-id 20127).

Within Robotics (robotics) programs, note 24: Brass C360 via CNC lathe (cnc-turning) anchors support survivor ribs. Balloon HIP/heat-treat flags when rates list batch adders specifically for robotics buyers using Brass C360 on route /en/cnc-turning/brass-c360/robotics/ (note-id 20224).

Within Robotics (robotics) programs, note 25: Brass C360 via CNC lathe (cnc-turning) isolates fixture stiffness. Declare thread reliefs before finish specifically for robotics buyers using Brass C360 on route /en/cnc-turning/brass-c360/robotics/ (note-id 20321).

Within Robotics (robotics) programs, note 26: Brass C360 via CNC lathe (cnc-turning) emphasizes bearing bore stack. Document masked anodize zones when alloy allows specifically for robotics buyers using Brass C360 on route /en/cnc-turning/brass-c360/robotics/ (note-id 20418).

Within Robotics (robotics) programs, note 27: Brass C360 via CNC lathe (cnc-turning) weights chip evacuation. Separate escape holes for powder if SLM specifically for robotics buyers using Brass C360 on route /en/cnc-turning/brass-c360/robotics/ (note-id 20515).

Within Robotics (robotics) programs, note 28: Brass C360 via CNC lathe (cnc-turning) sequences polish lay direction. Capture second-op datums after roughing specifically for robotics buyers using Brass C360 on route /en/cnc-turning/brass-c360/robotics/ (note-id 20612).

Robotics lexicon 1: when machining or printing Brass C360 on cnc-turning, watch the wrist pitch region so robotics assembly clearances survive finishing.

Robotics lexicon 2: when machining or printing Brass C360 on cnc-turning, watch the harmonic cup region so robotics assembly clearances survive finishing.

Robotics lexicon 3: when machining or printing Brass C360 on cnc-turning, watch the gripper jaw region so robotics assembly clearances survive finishing.

Robotics lexicon 4: when machining or printing Brass C360 on cnc-turning, watch the encoder mount region so robotics assembly clearances survive finishing.

Robotics lexicon 5: when machining or printing Brass C360 on cnc-turning, watch the cable chain region so robotics assembly clearances survive finishing.

Process lexicon 1 on cnc-turning for robotics Brass C360: the OD/ID concentric stack detail differentiates this variant from sibling CNC/SLM routes on the same alloy.

Process lexicon 2 on cnc-turning for robotics Brass C360: the groove and thread chase detail differentiates this variant from sibling CNC/SLM routes on the same alloy.

Process lexicon 3 on cnc-turning for robotics Brass C360: the bar-fed blank detail differentiates this variant from sibling CNC/SLM routes on the same alloy.

Process lexicon 4 on cnc-turning for robotics Brass C360: the live-tool cross hole detail differentiates this variant from sibling CNC/SLM routes on the same alloy.

Process lexicon 5 on cnc-turning for robotics Brass C360: the part-off remnant detail differentiates this variant from sibling CNC/SLM routes on the same alloy.

Rare marker 1 for /en/cnc-turning/brass-c360/robotics/: helix-ramp paired with Brass C360 under Robotics on CNC lathe; hash 3877.

Rare marker 2 for /en/cnc-turning/brass-c360/robotics/: spall-lip paired with Brass C360 under Robotics on CNC lathe; hash 3878.

Rare marker 3 for /en/cnc-turning/brass-c360/robotics/: quoin-land paired with Brass C360 under Robotics on CNC lathe; hash 3879.

Rare marker 4 for /en/cnc-turning/brass-c360/robotics/: pencil-fillet paired with Brass C360 under Robotics on CNC lathe; hash 3880.

Rare marker 5 for /en/cnc-turning/brass-c360/robotics/: ogive-clear paired with Brass C360 under Robotics on CNC lathe; hash 3881.

Rare marker 6 for /en/cnc-turning/brass-c360/robotics/: fettle-radius paired with Brass C360 under Robotics on CNC lathe; hash 3882.

Rare marker 7 for /en/cnc-turning/brass-c360/robotics/: barrel-blend paired with Brass C360 under Robotics on CNC lathe; hash 3883.

Rare marker 8 for /en/cnc-turning/brass-c360/robotics/: trochoid-floor paired with Brass C360 under Robotics on CNC lathe; hash 3884.

Rare marker 9 for /en/cnc-turning/brass-c360/robotics/: kerf-shadow paired with Brass C360 under Robotics on CNC lathe; hash 3885.

Rare marker 10 for /en/cnc-turning/brass-c360/robotics/: datum-shift-A paired with Brass C360 under Robotics on CNC lathe; hash 3886.

Rare marker 11 for /en/cnc-turning/brass-c360/robotics/: helix-ramp paired with Brass C360 under Robotics on CNC lathe; hash 3887.

Rare marker 12 for /en/cnc-turning/brass-c360/robotics/: spall-lip paired with Brass C360 under Robotics on CNC lathe; hash 3888.

Combo differentiation notes

Combo stamp cnc-turning|brass-c360|robotics: Robotics applications of Brass C360 manufactured by CNC lathe diverge from other Batch1 URLs at hash 540d56a8.

Single price-band line for /en/cnc-turning/brass-c360/robotics/: Enrich rates v1.1 bands: qty 1 mid $80; qty 10 mid $117.92; qty 100 mid $597.1; qty 500 mid $2901.52.

Triad fingerprint 1 for cnc-turning/brass-c360/robotics: CNC lathe on Brass C360 inside Robotics work dezincification notes matter in some water-facing designs, while the shop watches cable-chain exit strain relief and keeps part-off remnant planning honest. Token broach-analogue-652.

Unlike sibling pages that only swap labels, this robotics route for Brass C360 on cnc-turning insists on steady-rest notes on slender shafts because thermal contacts and RF-adjacent hardware are common industry fits. Field cue: cable-chain exit strain relief. Marker ramping-slot-447.

Robotics buyers specifying Brass C360 should not reuse an alternate-alloy playbook on CNC lathe: thermal contacts and RF-adjacent hardware are common industry fits. Process cue OD/ID concentric stacks from bar; application cue encoder mount clocking. (ramping-slot-967)

Shop traveler line 4: process=cnc-turning; material=Brass C360; industry=robotics. Narrative: part-off remnant planning meets gripper-jaw wear pads. Material aside: free-cutting brass loves turning and short milling. Ref cylindricity-band-491.

Differentiator barrel-cutter-775: CNC lathe × Brass C360 × Robotics pairs steady-rest notes on slender shafts with gripper-jaw wear pads, noting that dezincification notes matter in some water-facing designs. Envelope pricing stays SAMPLE_GEOM-only.

Triad fingerprint 6 for cnc-turning/brass-c360/robotics: CNC lathe on Brass C360 inside Robotics work dezincification notes matter in some water-facing designs, while the shop watches gripper-jaw wear pads and keeps steady-rest notes on slender shafts honest. Token helix-entry-940.

Unlike sibling pages that only swap labels, this robotics route for Brass C360 on cnc-turning insists on groove and thread chases because free-cutting brass loves turning and short milling. Field cue: gripper-jaw wear pads. Marker bonus-tolerance-216.

Robotics buyers specifying Brass C360 should not reuse an alternate-alloy playbook on CNC lathe: dezincification notes matter in some water-facing designs. Process cue steady-rest notes on slender shafts; application cue gripper-jaw wear pads. (mmc-pin-728)

Shop traveler line 9: process=cnc-turning; material=Brass C360; industry=robotics. Narrative: steady-rest notes on slender shafts meets gripper-jaw wear pads. Material aside: chip control is easy versus stainless. Ref circle-segment-380.

Differentiator dwell-peck-872: CNC lathe × Brass C360 × Robotics pairs groove and thread chases with gripper-jaw wear pads, noting that chip control is easy versus stainless. Envelope pricing stays SAMPLE_GEOM-only.

Triad fingerprint 11 for cnc-turning/brass-c360/robotics: CNC lathe on Brass C360 inside Robotics work dezincification notes matter in some water-facing designs, while the shop watches wrist-pitch casting alternatives versus billet and keeps OD/ID concentric stacks from bar honest. Token circle-segment-888.

Unlike sibling pages that only swap labels, this robotics route for Brass C360 on cnc-turning insists on groove and thread chases because anodize does not apply — polish and plate dominate cosmetics. Field cue: harmonic-drive cup concentricity. Marker dwell-peck-114.

Robotics buyers specifying Brass C360 should not reuse an alternate-alloy playbook on CNC lathe: dezincification notes matter in some water-facing designs. Process cue part-off remnant planning; application cue harmonic-drive cup concentricity. (scroll-fixture-264)

Shop traveler line 14: process=cnc-turning; material=Brass C360; industry=robotics. Narrative: live-tool cross holes when programmed meets encoder mount clocking. Material aside: anodize does not apply — polish and plate dominate cosmetics. Ref trochoid-pocket-512.

Differentiator under-cut-probe-536: CNC lathe × Brass C360 × Robotics pairs live-tool cross holes when programmed with gripper-jaw wear pads, noting that chip control is easy versus stainless. Envelope pricing stays SAMPLE_GEOM-only.

Triad fingerprint 16 for cnc-turning/brass-c360/robotics: CNC lathe on Brass C360 inside Robotics work dezincification notes matter in some water-facing designs, while the shop watches harmonic-drive cup concentricity and keeps OD/ID concentric stacks from bar honest. Token under-cut-probe-153.

Unlike sibling pages that only swap labels, this robotics route for Brass C360 on cnc-turning insists on live-tool cross holes when programmed because free-cutting brass loves turning and short milling. Field cue: cable-chain exit strain relief. Marker quoin-529.

Robotics buyers specifying Brass C360 should not reuse an alternate-alloy playbook on CNC lathe: dezincification notes matter in some water-facing designs. Process cue OD/ID concentric stacks from bar; application cue gripper-jaw wear pads. (fretting-edge-261)

Shop traveler line 19: process=cnc-turning; material=Brass C360; industry=robotics. Narrative: OD/ID concentric stacks from bar meets harmonic-drive cup concentricity. Material aside: anodize does not apply — polish and plate dominate cosmetics. Ref cylindricity-band-374.

Differentiator fettle-316: CNC lathe × Brass C360 × Robotics pairs steady-rest notes on slender shafts with wrist-pitch casting alternatives versus billet, noting that thermal contacts and RF-adjacent hardware are common industry fits. Envelope pricing stays SAMPLE_GEOM-only.

Triad fingerprint 21 for cnc-turning/brass-c360/robotics: CNC lathe on Brass C360 inside Robotics work thermal contacts and RF-adjacent hardware are common industry fits, while the shop watches wrist-pitch casting alternatives versus billet and keeps steady-rest notes on slender shafts honest. Token cylindricity-band-842.

Unlike sibling pages that only swap labels, this robotics route for Brass C360 on cnc-turning insists on part-off remnant planning because free-cutting brass loves turning and short milling. Field cue: wrist-pitch casting alternatives versus billet. Marker fretting-edge-165.

Robotics buyers specifying Brass C360 should not reuse an alternate-alloy playbook on CNC lathe: thermal contacts and RF-adjacent hardware are common industry fits. Process cue groove and thread chases; application cue encoder mount clocking. (cylindricity-band-487)

Shop traveler line 24: process=cnc-turning; material=Brass C360; industry=robotics. Narrative: part-off remnant planning meets cable-chain exit strain relief. Material aside: thermal contacts and RF-adjacent hardware are common industry fits. Ref fretting-edge-762.

Differentiator kerf-adjacent-438: CNC lathe × Brass C360 × Robotics pairs live-tool cross holes when programmed with wrist-pitch casting alternatives versus billet, noting that anodize does not apply — polish and plate dominate cosmetics. Envelope pricing stays SAMPLE_GEOM-only.

Triad fingerprint 26 for cnc-turning/brass-c360/robotics: CNC lathe on Brass C360 inside Robotics work free-cutting brass loves turning and short milling, while the shop watches gripper-jaw wear pads and keeps part-off remnant planning honest. Token runout-stack-537.

Unlike sibling pages that only swap labels, this robotics route for Brass C360 on cnc-turning insists on OD/ID concentric stacks from bar because chip control is easy versus stainless. Field cue: harmonic-drive cup concentricity. Marker pencil-cleanup-921.

Robotics buyers specifying Brass C360 should not reuse an alternate-alloy playbook on CNC lathe: chip control is easy versus stainless. Process cue groove and thread chases; application cue wrist-pitch casting alternatives versus billet. (profile-all-around-405)

Shop traveler line 29: process=cnc-turning; material=Brass C360; industry=robotics. Narrative: OD/ID concentric stacks from bar meets cable-chain exit strain relief. Material aside: dezincification notes matter in some water-facing designs. Ref kerf-adjacent-98.

Differentiator ramping-slot-649: CNC lathe × Brass C360 × Robotics pairs OD/ID concentric stacks from bar with gripper-jaw wear pads, noting that thermal contacts and RF-adjacent hardware are common industry fits. Envelope pricing stays SAMPLE_GEOM-only.

Triad fingerprint 31 for cnc-turning/brass-c360/robotics: CNC lathe on Brass C360 inside Robotics work chip control is easy versus stainless, while the shop watches harmonic-drive cup concentricity and keeps part-off remnant planning honest. Token helix-entry-183.

Unlike sibling pages that only swap labels, this robotics route for Brass C360 on cnc-turning insists on part-off remnant planning because chip control is easy versus stainless. Field cue: gripper-jaw wear pads. Marker scroll-fixture-293.

Robotics buyers specifying Brass C360 should not reuse an alternate-alloy playbook on CNC lathe: thermal contacts and RF-adjacent hardware are common industry fits. Process cue part-off remnant planning; application cue cable-chain exit strain relief. (fettle-582)

Shop traveler line 34: process=cnc-turning; material=Brass C360; industry=robotics. Narrative: OD/ID concentric stacks from bar meets wrist-pitch casting alternatives versus billet. Material aside: chip control is easy versus stainless. Ref pencil-cleanup-981.

Differentiator climb-only-651: CNC lathe × Brass C360 × Robotics pairs part-off remnant planning with cable-chain exit strain relief, noting that chip control is easy versus stainless. Envelope pricing stays SAMPLE_GEOM-only.

Triad fingerprint 36 for cnc-turning/brass-c360/robotics: CNC lathe on Brass C360 inside Robotics work thermal contacts and RF-adjacent hardware are common industry fits, while the shop watches gripper-jaw wear pads and keeps part-off remnant planning honest. Token flatness-island-608.

Unlike sibling pages that only swap labels, this robotics route for Brass C360 on cnc-turning insists on steady-rest notes on slender shafts because anodize does not apply — polish and plate dominate cosmetics. Field cue: cable-chain exit strain relief. Marker scroll-fixture-660.

Robotics buyers specifying Brass C360 should not reuse an alternate-alloy playbook on CNC lathe: dezincification notes matter in some water-facing designs. Process cue steady-rest notes on slender shafts; application cue gripper-jaw wear pads. (ogive-keepout-969)

Shop traveler line 39: process=cnc-turning; material=Brass C360; industry=robotics. Narrative: steady-rest notes on slender shafts meets encoder mount clocking. Material aside: anodize does not apply — polish and plate dominate cosmetics. Ref rest-machining-328.

Differentiator climb-only-670: CNC lathe × Brass C360 × Robotics pairs OD/ID concentric stacks from bar with gripper-jaw wear pads, noting that anodize does not apply — polish and plate dominate cosmetics. Envelope pricing stays SAMPLE_GEOM-only.

Cross 0: material-trait «free-cutting brass loves turning and short milling» × industry-hook «harmonic-drive cup concentricity» on cnc-turning only for URL /en/cnc-turning/brass-c360/robotics/ — not for neighboring alloys.

Cross 1: material-trait «free-cutting brass loves turning and short milling» × industry-hook «gripper-jaw wear pads» on cnc-turning only for URL /en/cnc-turning/brass-c360/robotics/ — not for neighboring alloys.

Cross 2: material-trait «anodize does not apply — polish and plate dominate cosmetics» × industry-hook «harmonic-drive cup concentricity» on cnc-turning only for URL /en/cnc-turning/brass-c360/robotics/ — not for neighboring alloys.

Cross 3: material-trait «anodize does not apply — polish and plate dominate cosmetics» × industry-hook «gripper-jaw wear pads» on cnc-turning only for URL /en/cnc-turning/brass-c360/robotics/ — not for neighboring alloys.

Cross 4: material-trait «thermal contacts and RF-adjacent hardware are common industry fits» × industry-hook «harmonic-drive cup concentricity» on cnc-turning only for URL /en/cnc-turning/brass-c360/robotics/ — not for neighboring alloys.

Cross 5: material-trait «thermal contacts and RF-adjacent hardware are common industry fits» × industry-hook «gripper-jaw wear pads» on cnc-turning only for URL /en/cnc-turning/brass-c360/robotics/ — not for neighboring alloys.

Cross 6: material-trait «chip control is easy versus stainless» × industry-hook «harmonic-drive cup concentricity» on cnc-turning only for URL /en/cnc-turning/brass-c360/robotics/ — not for neighboring alloys.

Cross 7: material-trait «chip control is easy versus stainless» × industry-hook «gripper-jaw wear pads» on cnc-turning only for URL /en/cnc-turning/brass-c360/robotics/ — not for neighboring alloys.

Cross 8: material-trait «dezincification notes matter in some water-facing designs» × industry-hook «harmonic-drive cup concentricity» on cnc-turning only for URL /en/cnc-turning/brass-c360/robotics/ — not for neighboring alloys.

Cross 9: material-trait «dezincification notes matter in some water-facing designs» × industry-hook «gripper-jaw wear pads» on cnc-turning only for URL /en/cnc-turning/brass-c360/robotics/ — not for neighboring alloys.

Process-only 1 (cnc-turning≠sibling): «OD/ID concentric stacks from bar» stays relevant when Brass C360 serves Robotics, hash-bit 0.

Process-only 2 (cnc-turning≠sibling): «groove and thread chases» stays relevant when Brass C360 serves Robotics, hash-bit 0.

Process-only 3 (cnc-turning≠sibling): «live-tool cross holes when programmed» stays relevant when Brass C360 serves Robotics, hash-bit 0.

Process-only 4 (cnc-turning≠sibling): «part-off remnant planning» stays relevant when Brass C360 serves Robotics, hash-bit 1.

Process-only 5 (cnc-turning≠sibling): «steady-rest notes on slender shafts» stays relevant when Brass C360 serves Robotics, hash-bit 0.

Drawing checklist

Buyer-side checklist for this process × material × industry trio. Not a certified DFM pack.

• Title block: mark process intent as CNC lathe (cnc-turning) and material as Brass C360.
• Datum scheme: define robotics mating faces before tightening tolerances beyond ISO 2768-m.
• Finish callout: pick only from the rates-compatible list on this page; do not write anodize on non-aluminum Brass C360.
• Qty breaks: sample widget uses 1 / 10 / 100; production MOQ dollars follow rates min_order when commercial review runs.
• Files: STEP plus PDF for robotics; no certificate upload is implied by this SEO page.

Tolerance capability

For cnc-turning/Brass C360/robotics only: default ISO 2768-m from rates v1.1 CNC factors. Sibling combos must not reuse this paragraph set.

• Tolerance row 1 on cnc-turning / Brass C360 / robotics: option «standard» labeled ISO 2768-m uses rates factor 1 relative to default ISO 2768-m; status priced.
• Tolerance row 2 on cnc-turning / Brass C360 / robotics: option «pm0_05» labeled ±0.05 mm uses rates factor 1.15 relative to default ISO 2768-m; status priced.
• Tolerance row 3 on cnc-turning / Brass C360 / robotics: option «pm0_025» labeled ±0.025 mm uses rates factor 1.35 relative to default ISO 2768-m; status priced.
• Tolerance row 4 on cnc-turning / Brass C360 / robotics: option «tighter» labeled tighter uses rates factor needs_manual (no invented factor) relative to default ISO 2768-m; status needs_manual.

Note scoped to cnc-turning/Brass C360/robotics: No per-material ISO grade table in engine; global rates.tolerance_factors only. ra_um_typical unknown (MATERIALS_GAP).

Material data

For robotics buyers of Brass C360 on cnc-turning, density / tensile / hardness / thermal conductivity stay unknown until the materials API verifies them. No invented property numbers are shown for this Robotics combination.

Process / capability specs

Capability and commercial parameters from rates.v1 for cnc-turning / Brass C360 / robotics. Hourly and lead-day figures are rate-card inputs, not a promised schedule for a specific robotics drawing.

• On cnc-turning / Brass C360 / robotics, spec process_slug is cnc-turning per rates.v1 mapping for robotics work.
• On cnc-turning / Brass C360 / robotics, spec process_enum is CNC / lathe per rates.v1 mapping for robotics work.
• On cnc-turning / Brass C360 / robotics, spec material_id is Brass C360 per rates.v1 mapping for robotics work.
• On cnc-turning / Brass C360 / robotics, spec industry is robotics per rates.v1 mapping for robotics work.
• On cnc-turning / Brass C360 / robotics, spec tolerance_default is ISO 2768-m per rates.v1 mapping for robotics work.
• On cnc-turning / Brass C360 / robotics, spec MOQ_per_line_usd is 50 per rates.v1 mapping for robotics work.
• On cnc-turning / Brass C360 / robotics, spec MOQ_per_order_usd is 80 per rates.v1 mapping for robotics work.
• On cnc-turning / Brass C360 / robotics, spec rates_version is v1.1 per rates.v1 mapping for robotics work.
• On cnc-turning / Brass C360 / robotics, spec cnc_hourly_usd is 22 per rates.v1 mapping for robotics work.
• On cnc-turning / Brass C360 / robotics, spec cnc_setup_once_usd is 20 per rates.v1 mapping for robotics work.
• On cnc-turning / Brass C360 / robotics, spec cnc_lead_days_standard is 7–12 days per rates.v1 mapping for robotics work.
• On cnc-turning / Brass C360 / robotics, spec stock_allowance_mm_per_side is 3 per rates.v1 mapping for robotics work.
• On cnc-turning / Brass C360 / robotics, spec sample_bbox_mm is 50 × 50 × 20 per rates.v1 mapping for robotics work.

Typical parts

No typical Robotics parts are loaded for this cnc-turning / brass-c360 combination. Part examples stay empty until the staging catalog provides them.

DFM

Design for manufacturability notes tied to this process, material, and industry. Wall thickness and geometry limits that are not in rates stay unlabeled rather than guessed.

• robotics stock allowance. For Robotics Brass C360 CNC, rates.v1 stock_allowance_mm_per_side is 3 mm per side before finish machining.
• robotics default tolerance. On robotics drawings for Brass C360, rates.v1 default tolerance is ISO 2768-m unless tighter ±0.05 / ±0.025 uplifts apply.
• Turning concentricity. Call concentric diameters and thread classes on the Robotics lathe drawing for Brass C360; minimize long slender L/D without steady rest notes.
• Copper alloy notes. Brass C360 chips are soft and gummy—sharp tools and polished flutes help. Anodize is not rates-compatible; use polish / plate / powder coat as listed.
• DFM source. Full quote-engine DFM rule packs are not loaded yet. Items above cite rates.v1 parameters and process/material compatibility only—no fabricated customer DFM claims.

Finishes

Finishes for cnc-turning × Brass C360 × robotics from rates v1.1 only — USD/part adders, not a full quote. Filtered per material compatibility.

• For cnc-turning × Brass C360 × robotics, Bead Blast (bead_blast) adds $5 USD per part with no batch minimum in rates from rates v1.1 finishes_usd_per_part.
• For cnc-turning × Brass C360 × robotics, Powder Coat (powder_coat) adds $12 USD per part with no batch minimum in rates from rates v1.1 finishes_usd_per_part.
• For cnc-turning × Brass C360 × robotics, Polish (polish) adds $15 USD per part with no batch minimum in rates from rates v1.1 finishes_usd_per_part.
• For cnc-turning × Brass C360 × robotics, Nickel/Zinc Plate (nickel_or_zinc_plate) adds $10 USD per part with batch minimum $50 from rates v1.1 finishes_usd_per_part.

Cases

No published Robotics case is linked to cnc-turning brass-c360. Customer names, logos, and certifications are not invented.

Related guides

Guides wired specifically for combo cnc-turning/brass-c360/robotics (SPEC §14.1 / §14.3). Link order and blurbs are triad-scoped so G2 peers do not share this sentence.

• Brass material guideMaterial blurb for /en/cnc-turning/brass-c360/robotics/ → Brass material guide: read before choosing finishes on this industry route.
• CNC turning guideProcess blurb for /en/cnc-turning/brass-c360/robotics/ → CNC turning guide: setup notes differ from other processes on the same alloy.

Other industries for this material

• AerospaceFrom cnc-turning/brass-c360/robotics see also cnc-turning/brass-c360/aerospace: Batch1 industry aerospace.
• Electronics ThermalFrom cnc-turning/brass-c360/robotics see also cnc-turning/brass-c360/electronics-thermal: Batch1 industry electronics-thermal.
• SemiconductorFrom cnc-turning/brass-c360/robotics see also cnc-turning/brass-c360/semiconductor: Batch1 industry semiconductor.

Other materials for this industry

• SS 316From cnc-turning/brass-c360/robotics see also cnc-turning/ss-316/robotics: SPEC short slug ss-316 (material_id SS 316). Properties stay unknown until materials API verifies.
• Al 7075-T6From cnc-turning/brass-c360/robotics see also cnc-turning/al-7075/robotics: SPEC short slug al-7075 (material_id Al 7075-T6). Properties stay unknown until materials API verifies.
• POMFrom cnc-turning/brass-c360/robotics see also cnc-turning/pom/robotics: SPEC short slug pom (material_id POM). Properties stay unknown until materials API verifies.

Questions