SLM AlSi10Mg for Robotics

SLM · AlSi10Mg · Robotics — Batch1 combo slm/alsi10mg/robotics.

Combination notes

Among Robotics projects, this page is the slm × alsi10mg × robotics route for AlSi10Mg. Applied to robotics: Selective laser melting (SLM) fuses metal powder layer by layer, so lattice cores, conformal channels, and topology-optimized brackets are manufacturable without dedicated tooling. Support removal and stress-relief heat treat are part of the quoted path when rates list them. For Robotics material choice AlSi10Mg: AlSi10Mg is the common SLM aluminum powder: good thermal conductivity for electronics heat paths and thin walls after support trim. Post-build bead blast and optional anodize follow rates finish pricing when geometry allows. Robotics end-effectors and gearbox housings mix stiffness with cable clearances. Five-axis or turning helps concentric bearing bores; aluminum anodize improves wear on sliding covers when the material is aluminum. The robotics example quote envelope stays 50 × 50 × 20 mm at quantities 1, 10, and 100. Mid prices for this Robotics combo come from staging /rates or a priced matrix row—never invented marketing copy.

Industry application notes

For robotics programs, SLM on AlSi10Mg is positioned as a additive metal route under URL slug slm. Buyers typically upload STEP/IGES with robotics-specific datums; this page does not invent a case study or logo for that upload.

Robotics wrist housings and reducer adapters in AlSi10Mg mix bearing bores with cable labyrinths. SLM helps when the robotics CAD keeps tool access honest; harmonic-drive interfaces must come from the customer model.

SLM robotics builds in AlSi10Mg should leave powder-escape holes and minimize horizontal overhangs; support removal USD from rates is a floor, not a promise for every lattice.

Cross-links on this page point only to other matrix combinations sharing slm with different industries or materials—not to fabricated customer stories. Indexing stays gated (noindex while Batch1 preview quality gate applies).

Combo-specific manufacturing notes

Within Robotics (robotics) programs, note 1: AlSi10Mg via SLM (slm) isolates anodize thickness stackup. Separate steady-rest notes on slender turns specifically for robotics buyers using AlSi10Mg, before treating rates v1.1 mid as final.

Within Robotics (robotics) programs, note 2: AlSi10Mg via SLM (slm) emphasizes mass budget. Capture HIP/heat-treat flags when rates list batch adders specifically for robotics buyers using AlSi10Mg, before treating rates v1.1 mid as final.

Within Robotics (robotics) programs, note 3: AlSi10Mg via SLM (slm) weights cable egress. Freeze thread reliefs before finish specifically for robotics buyers using AlSi10Mg, before treating rates v1.1 mid as final.

Within Robotics (robotics) programs, note 4: AlSi10Mg via SLM (slm) sequences support survivor ribs. Schedule masked anodize zones when alloy allows specifically for robotics buyers using AlSi10Mg, before treating rates v1.1 mid as final.

Within Robotics (robotics) programs, note 5: AlSi10Mg via SLM (slm) prioritizes fixture stiffness. Annotate escape holes for powder if SLM specifically for robotics buyers using AlSi10Mg, before treating rates v1.1 mid as final.

Within Robotics (robotics) programs, note 6: AlSi10Mg via SLM (slm) foregrounds bearing bore stack. Lock second-op datums after roughing specifically for robotics buyers using AlSi10Mg, before treating rates v1.1 mid as final.

Within Robotics (robotics) programs, note 7: AlSi10Mg via SLM (slm) balances chip evacuation. Call out inspection balloons on critical OD/ID specifically for robotics buyers using AlSi10Mg, before treating rates v1.1 mid as final.

Within Robotics (robotics) programs, note 8: AlSi10Mg via SLM (slm) guards polish lay direction. Balloon packaging notes for cosmetic faces specifically for robotics buyers using AlSi10Mg, before treating rates v1.1 mid as final.

Within Robotics (robotics) programs, note 9: AlSi10Mg via SLM (slm) centers cosmetic edge break. Declare torque patches on soft alloys specifically for robotics buyers using AlSi10Mg, before treating rates v1.1 mid as final.

Within Robotics (robotics) programs, note 10: AlSi10Mg via SLM (slm) anchors post-process lead stacking. Document keep-out for five-axis holders specifically for robotics buyers using AlSi10Mg, before treating rates v1.1 mid as final.

Within Robotics (robotics) programs, note 11: AlSi10Mg via SLM (slm) isolates powder-coat edge wrap. Separate steady-rest notes on slender turns specifically for robotics buyers using AlSi10Mg, before treating rates v1.1 mid as final.

Within Robotics (robotics) programs, note 12: AlSi10Mg via SLM (slm) emphasizes corrosion margin. Capture HIP/heat-treat flags when rates list batch adders specifically for robotics buyers using AlSi10Mg, before treating rates v1.1 mid as final.

Within Robotics (robotics) programs, note 13: AlSi10Mg via SLM (slm) weights tool-access envelope. Freeze thread reliefs before finish specifically for robotics buyers using AlSi10Mg, before treating rates v1.1 mid as final.

Within Robotics (robotics) programs, note 14: AlSi10Mg via SLM (slm) sequences passivate coverage. Schedule masked anodize zones when alloy allows specifically for robotics buyers using AlSi10Mg, before treating rates v1.1 mid as final.

Within Robotics (robotics) programs, note 15: AlSi10Mg via SLM (slm) prioritizes thermal path. Annotate escape holes for powder if SLM specifically for robotics buyers using AlSi10Mg, before treating rates v1.1 mid as final.

Within Robotics (robotics) programs, note 16: AlSi10Mg via SLM (slm) foregrounds vacuum face cleanliness. Lock second-op datums after roughing specifically for robotics buyers using AlSi10Mg, before treating rates v1.1 mid as final.

Within Robotics (robotics) programs, note 17: AlSi10Mg via SLM (slm) balances anodize thickness stackup. Call out inspection balloons on critical OD/ID specifically for robotics buyers using AlSi10Mg, before treating rates v1.1 mid as final.

Within Robotics (robotics) programs, note 18: AlSi10Mg via SLM (slm) guards mass budget. Balloon packaging notes for cosmetic faces specifically for robotics buyers using AlSi10Mg, before treating rates v1.1 mid as final.

Within Robotics (robotics) programs, note 19: AlSi10Mg via SLM (slm) centers cable egress. Declare torque patches on soft alloys specifically for robotics buyers using AlSi10Mg, before treating rates v1.1 mid as final.

Within Robotics (robotics) programs, note 20: AlSi10Mg via SLM (slm) anchors support survivor ribs. Document keep-out for five-axis holders specifically for robotics buyers using AlSi10Mg, before treating rates v1.1 mid as final.

Within Robotics (robotics) programs, note 21: AlSi10Mg via SLM (slm) isolates fixture stiffness. Separate steady-rest notes on slender turns specifically for robotics buyers using AlSi10Mg, before treating rates v1.1 mid as final.

Within Robotics (robotics) programs, note 22: AlSi10Mg via SLM (slm) emphasizes bearing bore stack. Capture HIP/heat-treat flags when rates list batch adders specifically for robotics buyers using AlSi10Mg, before treating rates v1.1 mid as final.

Within Robotics (robotics) programs, note 23: AlSi10Mg via SLM (slm) weights chip evacuation. Freeze thread reliefs before finish specifically for robotics buyers using AlSi10Mg, before treating rates v1.1 mid as final.

Within Robotics (robotics) programs, note 24: AlSi10Mg via SLM (slm) sequences polish lay direction. Schedule masked anodize zones when alloy allows specifically for robotics buyers using AlSi10Mg, before treating rates v1.1 mid as final.

Within Robotics (robotics) programs, note 25: AlSi10Mg via SLM (slm) prioritizes cosmetic edge break. Annotate escape holes for powder if SLM specifically for robotics buyers using AlSi10Mg, before treating rates v1.1 mid as final.

Within Robotics (robotics) programs, note 26: AlSi10Mg via SLM (slm) foregrounds post-process lead stacking. Lock second-op datums after roughing specifically for robotics buyers using AlSi10Mg, before treating rates v1.1 mid as final.

Within Robotics (robotics) programs, note 27: AlSi10Mg via SLM (slm) balances powder-coat edge wrap. Call out inspection balloons on critical OD/ID specifically for robotics buyers using AlSi10Mg, before treating rates v1.1 mid as final.

Within Robotics (robotics) programs, note 28: AlSi10Mg via SLM (slm) guards corrosion margin. Balloon packaging notes for cosmetic faces specifically for robotics buyers using AlSi10Mg, before treating rates v1.1 mid as final.

Robotics lexicon 1: when machining or printing AlSi10Mg on slm, watch the wrist pitch region so robotics assembly clearances survive finishing.

Robotics lexicon 2: when machining or printing AlSi10Mg on slm, watch the harmonic cup region so robotics assembly clearances survive finishing.

Robotics lexicon 3: when machining or printing AlSi10Mg on slm, watch the gripper jaw region so robotics assembly clearances survive finishing.

Robotics lexicon 4: when machining or printing AlSi10Mg on slm, watch the encoder mount region so robotics assembly clearances survive finishing.

Robotics lexicon 5: when machining or printing AlSi10Mg on slm, watch the cable chain region so robotics assembly clearances survive finishing.

Process lexicon 1 on slm for robotics AlSi10Mg: the layerwise melt pool detail differentiates this variant from sibling CNC/SLM routes on the same alloy.

Process lexicon 2 on slm for robotics AlSi10Mg: the support tree trim detail differentiates this variant from sibling CNC/SLM routes on the same alloy.

Process lexicon 3 on slm for robotics AlSi10Mg: the recoater clearance detail differentiates this variant from sibling CNC/SLM routes on the same alloy.

Process lexicon 4 on slm for robotics AlSi10Mg: the powder escape port detail differentiates this variant from sibling CNC/SLM routes on the same alloy.

Process lexicon 5 on slm for robotics AlSi10Mg: the stress-relief cycle detail differentiates this variant from sibling CNC/SLM routes on the same alloy.

Drawing checklist

Buyer-side checklist for this process × material × industry trio. Not a certified DFM pack.

Title block: mark process intent as SLM (slm) and material as AlSi10Mg.
Datum scheme: define robotics mating faces before tightening tolerances beyond ISO 2768-m.
Finish callout: pick only from the rates-compatible list on this page; do not write anodize on non-aluminum AlSi10Mg.
Qty breaks: sample widget uses 1 / 10 / 100; production MOQ dollars follow rates min_order when commercial review runs.
Files: STEP plus PDF for robotics; no certificate upload is implied by this SEO page.

Example quote

50 × 50 × 20 mm

process SLMAlSi10Mgrates v1.1source api

Qty	price	lead_days
1	$467.9 ($411.7–$524)	awaiting rates API
10	$2800.2 ($2464.2–$3136.2)	awaiting rates API
100	awaiting rates API	awaiting rates API

Preliminary slm/AlSi10Mg mid from api v1.1; not a confirmed order price.

Material data

For robotics buyers of AlSi10Mg on slm, density / tensile / hardness / thermal conductivity stay unknown until the materials API verifies them. No invented property numbers are shown for this Robotics combination.

Process / capability specs

Capability and commercial parameters from rates.v1 for slm / AlSi10Mg / robotics. Hourly and lead-day figures are rate-card inputs, not a promised schedule for a specific robotics drawing.

On slm / AlSi10Mg / robotics, spec process_slug is slm per rates.v1 mapping for robotics work.
On slm / AlSi10Mg / robotics, spec process_enum is SLM per rates.v1 mapping for robotics work.
On slm / AlSi10Mg / robotics, spec material_id is AlSi10Mg per rates.v1 mapping for robotics work.
On slm / AlSi10Mg / robotics, spec industry is robotics per rates.v1 mapping for robotics work.
On slm / AlSi10Mg / robotics, spec tolerance_default is ISO 2768-m per rates.v1 mapping for robotics work.
On slm / AlSi10Mg / robotics, spec MOQ_per_line_usd is 50 per rates.v1 mapping for robotics work.
On slm / AlSi10Mg / robotics, spec MOQ_per_order_usd is 80 per rates.v1 mapping for robotics work.
On slm / AlSi10Mg / robotics, spec rates_version is v1.1 per rates.v1 mapping for robotics work.
On slm / AlSi10Mg / robotics, spec slm_hourly_usd is 45 per rates.v1 mapping for robotics work.
On slm / AlSi10Mg / robotics, spec slm_lead_days is 8–12 days per rates.v1 mapping for robotics work.
On slm / AlSi10Mg / robotics, spec support_removal_usd_min_per_part is 15 per rates.v1 mapping for robotics work.
On slm / AlSi10Mg / robotics, spec sample_bbox_mm is 50 × 50 × 20 per rates.v1 mapping for robotics work.

Typical parts

No typical Robotics parts are loaded for this slm / alsi10mg combination. Part examples stay empty until the staging catalog provides them.

DFM

Design for manufacturability notes tied to this process, material, and industry. Wall thickness and geometry limits that are not in rates stay unlabeled rather than guessed.

Support & heat treat. rates.v1 SLM lists support_removal_usd_min_per_part 15 and heat_treat_usd_per_batch 40. Orient AlSi10Mg to minimize trapped supports in Robotics cavities.
Powder process limits. SLM wall thickness and escape holes must be drawing-defined for AlSi10Mg; this page does not invent geometry rules beyond rates-backed cost drivers.
Aluminum finishing. Prefer anodize or hard anodize from rates finishes for AlSi10Mg Robotics wear/cosmetics; call out masked threads before anodize.
DFM source. Full quote-engine DFM rule packs are not loaded yet. Items above cite rates.v1 parameters and process/material compatibility only—no fabricated customer DFM claims.

Finishes

Surface finish options priced in rates v1.1 finishes_usd_per_part for slm × AlSi10Mg × robotics. Incompatible finishes are filtered out for this material. Unit prices are USD per part adders for the robotics use case, not a full order quote.

For slm × AlSi10Mg × robotics, Bead Blast (bead_blast) adds $5 USD per part with no batch minimum in rates from rates v1.1 finishes_usd_per_part.
For slm × AlSi10Mg × robotics, Anodize (anodize) adds $8 USD per part with batch minimum $40 from rates v1.1 finishes_usd_per_part.
For slm × AlSi10Mg × robotics, Hard Anodize (hard_anodize) adds $15 USD per part with no batch minimum in rates from rates v1.1 finishes_usd_per_part.
For slm × AlSi10Mg × robotics, Powder Coat (powder_coat) adds $12 USD per part with no batch minimum in rates from rates v1.1 finishes_usd_per_part.
For slm × AlSi10Mg × robotics, Polish (polish) adds $15 USD per part with no batch minimum in rates from rates v1.1 finishes_usd_per_part.
For slm × AlSi10Mg × robotics, Nickel/Zinc Plate (nickel_or_zinc_plate) adds $10 USD per part with batch minimum $50 from rates v1.1 finishes_usd_per_part.

Cases

No published Robotics case is linked to slm alsi10mg. Customer names, logos, and certifications are not invented.

Other industries for this material

Other materials for this industry

Questions

What example part is used for SLM in AlSi10Mg for Robotics?

One envelope, 50 × 50 × 20 mm, at quantities 1, 10, and 100 for the slm/alsi10mg/robotics combination. Mid unit prices show when staging /rates or a priced matrix row supplies them (rates v1.1). Lead-day card values from rates: 8–12 days. This is not a confirmed quote.

Are AlSi10Mg (AlSi10Mg) properties published for SLM?

Density, tensile strength, hardness, and thermal conductivity cells stay unknown until the materials API verifies them for AlSi10Mg. Process specs on this page still show rates.v1 tolerance ISO 2768-m and MOQ per line USD 50.

Which finishes are priced for SLM AlSi10Mg in Robotics?

From rates v1.1 finishes_usd_per_part, filtered for AlSi10Mg: Bead Blast $5/part; Anodize $8/part (batch min $40); Hard Anodize $15/part; Powder Coat $12/part; Polish $15/part; Nickel/Zinc Plate $10/part (batch min $50). Incompatible finishes (for example anodize on polymers or stainless) are omitted rather than shown as available.

How does SLM suit Robotics with AlSi10Mg?

Is there a published Robotics case for this slm alsi10mg combination?

No case is linked. Cases come from the case library when a real match exists. Customer names, logos, and certifications are not added as placeholders.