The short answer
**Machining stock** (a machining allowance) on an SLM part is not the same as [support removal and a skim cut](https://3dwk.com/resources/slm-support-removal-and-skim-notes), and it is not a substitute for a [hybrid SLM-plus-CNC split](https://3dwk.com/resources/slm-vs-cnc-hybrid-part-strategies). A usable callout says **which faces, bores, or datums will be post-machined**, the **allowance or envelope you actually want**, how those faces relate to **as-built keep-outs**, and the **sequence** versus support removal, [HIP](https://3dwk.com/resources/when-to-specify-hip-after-slm-parts), and [T6 / aging](https://3dwk.com/resources/when-to-specify-t6-aging-after-slm-alsi10mg). Silence, or a note that only says “leave stock for machining,” is what widens many [quote-new.php](https://3dwk.com/quote-new.php) **rates.v1.1** estimate bands—not the extra powder alone.
This guide is for buyers packaging SLM parts that will be finish-machined on selected faces. Illustrations use an **Example part** only—not a customer bracket, and not a fabricated allowance table. Sibling notes cover support skim, HIP, T6, CT, and sealant; here we focus on **when a machining-stock pack is worth calling out**.
What machining stock on SLM parts means for quoting
A **stock pack** names the faces that will be milled, turned, or ground after the build, the allowance or the as-built envelope, and which surfaces must stay as-built. Writing “machine as needed” or “leave some stock” is not enough. Process pages for common SLM aluminum ([SLM AlSi10Mg aerospace](https://3dwk.com/en/slm/alsi10mg/aerospace.html), [SLM AlSi10Mg automation](https://3dwk.com/en/slm/alsi10mg/automation.html), [SLM AlSi10Mg](https://3dwk.com/en/slm/alsi10mg.html)) assume the pack is visible when lots mix net-shape as-built parts, support-skim only, and parts with labeled post-machine stock on datums or bores.
Do not bury “leave machining stock” inside a notes cloud. Put **MACHINING STOCK: REQUIRED ON DATUM A, BORE B, AND FACE C; ALLOWANCE CITED ON THE PDF; ALL OTHER SURFACES AS-BUILT; AFTER SUPPORT REMOVAL AND AFTER HIP / T6 IF THOSE ARE CITED** on the PDF and mirror it in RFQ text. If no post-machine stock is required, say **NO MACHINING ALLOWANCE; AS-BUILT OR SUPPORT-SKIM ONLY** so the shop does not inflate every face. Background: [what files to send for a CNC quote](https://3dwk.com/resources/what-files-to-send-for-cnc-quote), [SLM residual stress and warpage notes](https://3dwk.com/resources/slm-residual-stress-warpage-notes-for-buyers).
When the stock pack is worth calling out
Specify machining allowance when a sealing face, a bearing bore, a datum, or a mating pad must be cut after the build, and when you can point to those faces on the model or PDF. Skip a blanket stock note on a prototype that will ship as-built, and do not treat stock as a substitute for [porosity sealant](https://3dwk.com/resources/when-to-specify-porosity-sealant-after-slm-aluminum), [CT inspection](https://3dwk.com/resources/when-to-specify-ct-inspection-after-slm-parts), or HIP. Stock is material left for a later cut; it is not an inspection method and not a density process.
Fixture pads, sealing faces, and bearing bores are the usual candidates; cosmetic walls and lattice regions usually stay as-built unless you say otherwise. If you cite an allowance, an envelope, or a finish-machine drawing, write the **value or the model state on the PDF**. This guide does not invent a default stock thickness, a uniform offset, or a 3DWK-standard SLM allowance. Distortion and orientation still matter—see warpage notes—but they do not replace a face-by-face stock list.
Sequence versus supports, HIP, and aging
Name the order: build, support removal, HIP or T6 if those are required, then the finish-machine of the stocked faces—or write a different order if the program requires machining before a thermal step and says why. A skim to clean support scars is not the same as a stated allowance on a functional bore. Fixture faces used only to hold the part for the finish cut should be labeled as such so they are not mistaken for cosmetic walls.
Tolerance and inspection traps
Calling “leave stock as needed,” putting tight tolerances on faces that still have no allowance in the model, or asking to “machine everywhere after SLM,” all force **needs_manual**. Default an as-built cosmetic wall to an explicit no-stock note; do not let a generic allowance appear on every downskin. Related: [what needs_manual means](https://3dwk.com/resources/what-needs-manual-means-preliminary-quote).
Illustration 1 shows an **Example part** SLM AlSi10Mg bracket with labeled machining stock on datum A, bore B, and face C, allowance cited by the buyer, other surfaces as-built, and sequence after support removal and after HIP or T6 if cited.
Example part walkthrough
**Example part:** SLM AlSi10Mg bracket, machining stock required on datum A, bore B, and face C, allowance cited on the PDF, all other surfaces as-built, stock machined after support removal and after HIP or T6 if those are specified, no invented default offset or 3DWK allowance recipe. With STEP + **STOCK ON A, B, AND C; ALLOWANCE CITED; OTHER FACES AS-BUILT; AFTER SUPPORTS AND AFTER HIP / T6 IF CITED**, expect a usable automatic planning band on [quote-new.php](https://3dwk.com/quote-new.php). Same geometry with silent “leave stock for machining” often lands DFM notes or **needs_manual**—without inventing any customer build, allowance certificate, or a 3DWK-guaranteed distortion result.
Illustration 2 contrasts a vague RFQ (“leave stock as needed”) versus a labeled face-allowance-sequence pack and the clearer estimate path.
What widens bands fastest
Unlabeled “as needed” stock, tight tolerances on faces that were modeled net-shape, a blanket “machine all over” note, and sequence left silent versus HIP or aging. Quantity breaks do not erase stock-pack ambiguity—see [how quantity breaks change CNC unit cost](https://3dwk.com/resources/how-quantity-breaks-change-cnc-unit-cost).
What to do next
Mark the RFQ with **which faces get stock, the allowance or envelope, as-built keep-outs, and sequence versus supports, HIP, and T6**, then upload the CAD on [quote-new.php](https://3dwk.com/quote-new.php). Packaging checklist: stock is not a support skim and not a hybrid split; keep those notes on their own lines. Service pages: [3D printing](https://3dwk.com/3d-printing-service.php), [materials](https://3dwk.com/materials.php). Treat **rates.v1.1** min/mid/max as estimates, not invoices. If the UI shows **needs_manual**, answer the machining-stock questions rather than forcing a fake price.
Common questions
Is machining stock the same as support removal or a skim?
No. Support removal and a skim clean build artifacts. Machining stock is extra material you planned so a functional face or bore can be cut to size after the build. You can need both; they are not interchangeable notes.
Does every SLM part need a machining allowance?
No. Specify stock only on faces that will actually be post-machined. An as-built prototype should not inherit a “leave stock as needed” note on every wall.
Can 3DWK just use a standard allowance?
Cite the allowance or the finish-machine model you need on the PDF. This guide does not invent a default offset or a 3DWK-standard stock as a guarantee.
Where does HIP or T6 sit versus the machining cut?
Usually before the finish cut of stocked faces, unless the drawing places a different order and says why. Write the order, and do not use stock as a substitute for HIP, T6, sealant, or CT.
