Quality and Inspection

When to specify porosity sealant after SLM aluminum

When to specify porosity sealant after SLM aluminum: impregnation sequence and rates.v1.1 estimate packaging—Example part only.

By 3DWK Engineering Team · · 5 min read

Example part AlSi10Mg SLM manifold map showing labeled porosity sealant on passages C1 and C2 after HIP and support removal, before anodize
Illustration: 3DWK original diagram (typical values, not to scale).

The short answer

A **porosity sealant / impregnation** after SLM aluminum is not a default coat on every printed manifold, and it is not a synonym for [HIP](https://3dwk.com/resources/when-to-specify-hip-after-slm-parts), [CT inspection](https://3dwk.com/resources/when-to-specify-ct-inspection-after-slm-parts), a [leak test](https://3dwk.com/resources/when-to-specify-leak-test-cnc-housings), or a [downskin roughness](https://3dwk.com/resources/slm-downskin-roughness-notes-for-buyers) note. A usable callout says **whether impregnation is required**, **which passages or faces must be pressure-tight**, the **sequence** versus HIP, support removal, machining, and anodize or chem film, and **how tightness will be checked** if a leak test is also in the pack. Silence, or a note that only says “seal as needed,” is what widens many [quote-new.php](https://3dwk.com/quote-new.php) **rates.v1.1** estimate bands—not the sealant cycle alone.

This guide is for buyers packaging AlSi10Mg SLM parts that must hold pressure in labeled channels. Illustrations use an **Example part** only—not a customer block, and not a fabricated leak-test result or a certificate. Sibling notes live in the HIP and CT guides; here we focus on **when a porosity-sealant pack is worth calling out**.

What porosity sealant after SLM aluminum means for quoting

A **sealant callout** names that impregnation is required on a pressure-tight part or on labeled passages, the sequence relative to HIP, [support removal and skim](https://3dwk.com/resources/slm-support-removal-and-skim-notes), machining, and any anodize, and whether a leak test follows. Writing “seal as needed” or “make it pressure-tight” is not enough. Process pages for AlSi10Mg SLM ([SLM AlSi10Mg aerospace](https://3dwk.com/en/slm/alsi10mg/aerospace.html), [SLM AlSi10Mg](https://3dwk.com/en/slm/alsi10mg.html), [SLM AlSi10Mg automation](https://3dwk.com/en/slm/alsi10mg/automation.html)) assume the sealant pack is visible when lots mix cosmetic printed housings and pressure-tight manifolds.

Do not bury “impregnate as needed” inside a notes cloud. Put **POROSITY SEALANT: REQUIRED AFTER HIP AND SUPPORT REMOVAL, BEFORE ANODIZE; PASSAGES C1/C2 PRESSURE-TIGHT; LEAK-TEST METHOD CITED IF REQUIRED** on the PDF and mirror it in RFQ text. If no sealant is required, say **NO IMPREGNATION** so the shop does not have to guess. Background: [SLM residual stress and warpage notes](https://3dwk.com/resources/slm-residual-stress-warpage-notes-for-buyers), [what files to send for a CNC quote](https://3dwk.com/resources/what-files-to-send-for-cnc-quote), [DFM checklist before an online CNC quote](https://3dwk.com/resources/dfm-checklist-before-online-cnc-quote).

Vague seal-as-needed RFQ versus labeled passage-sequence pack — Example part
Illustration: 3DWK original diagram (typical values, not to scale).

When the sealant is worth calling out

Specify impregnation when an SLM AlSi10Mg part has passages that must be pressure-tight, when as-built or even HIPed material is not accepted as sealed on its own, or when a program actually requires a sealant step before anodize or assembly. Skip a blanket seal on a prototype whose passages are still “as printed, no pressure duty,” and do not use sealant as a substitute for HIP, for CT, or for a named leak test. Sealant closes interconnected porosity; it is not a machining stock plan and it is not an internal-inspection report.

AlSi10Mg powder and part $/kg planning bands sit in the common SLM aluminum range under **rates.v1.1** material tables; material cost is rarely the sealant-pack story—passages, sequence, and any leak-test pack are.

Sequence versus HIP, machining, and anodize

Name the order: print, support removal, HIP if required, impregnation, then skim or machine of sealing faces, then anodize or chem film unless the drawing places sealant after machine and says so. Sealing before a large skim of a sealing land is a different RFQ from sealing after machine. Keep CT and leak-test notes on their own lines so inspection is not mistaken for a sealant step. If a leak test is required, cite the method and the acceptance on the drawing; do not ask the shop to invent a pass pressure or a hold time as a 3DWK result.

Tolerance and inspection traps

Calling “seal as needed,” asking for a “pressure-tight print” with no passages or sequence, or demanding a leak-test result without a method, all force **needs_manual**. Default cosmetic SLM housings to no impregnation; reserve a named sealant step for passages that actually have to hold pressure. Related: [ISO 2768 general tolerances on CNC RFQs](https://3dwk.com/resources/iso-2768-general-tolerances-cnc-rfq), [what needs_manual means](https://3dwk.com/resources/what-needs-manual-means-preliminary-quote).

Illustration 1 shows an **Example part** AlSi10Mg SLM manifold with labeled impregnation on passages C1 and C2 after HIP and support removal, before anodize, versus cosmetic ribs left unsealed.

Example part walkthrough

**Example part:** AlSi10Mg SLM manifold ~80 × 50 × 40 mm, porosity sealant required after HIP and support removal and before anodize, passages C1 and C2 required pressure-tight, sealing faces skimmed after sealant, leak-test method cited on the PDF if a test is part of the pack, no invented hold pressure or pass result. With STEP + **SEALANT REQUIRED AFTER HIP + SUPPORT REMOVAL, BEFORE ANODIZE; C1/C2 PRESSURE-TIGHT; LEAK-TEST METHOD CITED IF REQUIRED**, expect a usable automatic planning band on [quote-new.php](https://3dwk.com/quote-new.php). Same geometry with silent “seal as needed, make it leak-tight” often lands DFM notes or **needs_manual**—without inventing any customer PO, leak-test certificate, or a 3DWK-guaranteed porosity result.

Illustration 2 contrasts a vague RFQ (“impregnate as needed”) versus a labeled passage-sequence-inspection pack and the clearer estimate path.

What widens bands fastest

Unlabeled “as needed” sealant, a demand to “make it pressure-tight” with no passages, a sequence that is silent versus HIP or anodize, and a leak test demanded with no method. Quantity breaks help unit minutes but do not erase sealant-pack ambiguity—see [how quantity breaks change CNC unit cost](https://3dwk.com/resources/how-quantity-breaks-change-cnc-unit-cost) and [SLM versus CNC hybrid strategies](https://3dwk.com/resources/slm-vs-cnc-hybrid-part-strategies).

What to do next

Mark the RFQ with **required or not, which passages must be tight, sequence versus HIP, machine, and anodize, and any leak-test method you need cited**, then upload on [quote-new.php](https://3dwk.com/quote-new.php). Packaging checklist: HIP and CT on their own lines, then the sealant pack, then finish. Service pages: [3D printing](https://3dwk.com/3d-printing-service.php), [materials](https://3dwk.com/materials.php). Treat **rates.v1.1** min/mid/max as estimates, not invoices. If the UI shows **needs_manual**, answer the sealant-pack questions rather than forcing a fake price.

Common questions

Does every SLM aluminum manifold need impregnation?

No. Specify sealant when labeled passages must be pressure-tight and the program actually requires a seal step. Cosmetic or non-pressure housings should not inherit an “impregnate as needed” note by default.

Is sealant a substitute for HIP or CT?

No. HIP densifies the material; CT looks inside it; sealant impregnates interconnected porosity. They can appear on the same RFQ, but each belongs on its own line with its own sequence.

Can you just leak-test until it passes?

A leak test is an inspection pack, not a sealant process. If you need a test, cite the method and the acceptance on the drawing. This guide does not invent a hold pressure, a pass result, or a customer certificate.

Where does anodize sit versus sealant?

Usually after impregnation and after any skim of sealing faces, unless the drawing places the finish earlier and says why. Write the order. A sealed-then-anodized passage is a different pack from anodize-then-seal.

Free DFM · 24h quote

Upload CAD → free DFM report

Email required. You get a link to a rule-based manufacturability checklist (not a formal engineering sign-off). Engineers still review pricing.

No CAD? Photo / description → 24h quote

Three fields only — we reply within 24 hours.

Next step

Questions about your design?

Upload CAD files and an engineer will review manufacturability with your quote.

Upload CAD