CNC 3axis Brass C360 for Automation

Combination notes

Among Automation projects, this page is the cnc-3axis × brass-c360 × automation route for Brass C360. Applied to automation: Three-axis CNC mills planar pockets, drilled holes, and prismatic profiles with a single setup on the primary face. Contoured undercuts that need simultaneous multi-axis toolpaths are out of scope for this variant and should move to five-axis or a second setup. For Automation material choice Brass C360: Brass C360 turns and mills freely for fittings, thermal contacts, and RF-adjacent hardware. Anodize does not apply to brass; bead blast, polish, powder coat, and nickel/zinc plate remain on the rates finish list. Automation frames, locators, and wear pads need durable edges and predictable lead times. Mild steel or aluminum with powder coat or anodize covers most plant environments without inventing certifications. The automation example quote envelope stays 50 × 50 × 20 mm at quantities 1, 10, and 100. Mid prices for this Automation combo come from staging /rates or a priced matrix row—never invented marketing copy.

Industry application notes

For automation programs, CNC 3axis on Brass C360 is positioned as a subtractive route under URL slug cnc-3axis. Buyers typically upload STEP/IGES with automation-specific datums; this page does not invent a case study or logo for that upload.

Automation nest plates and wear strips in Brass C360 see cyclic abrasion. CNC 3axis with powder coat or anodize (when compatible) covers plant humidity without inventing IP ratings.

Three-axis toolpaths for this automation Brass C360 combo prefer planar floors and draft-free walls; side undercuts for automation clips need a second fixture that is not priced into the sample mid.

Cross-links on this page point only to other matrix combinations sharing cnc-3axis with different industries or materials—not to fabricated customer stories. Indexing stays gated (noindex while Batch1 preview quality gate applies).

Combo-specific manufacturing notes

Within Automation (automation) programs, note 1: Brass C360 via CNC 3axis (cnc-3axis) emphasizes polish lay direction. Document masked anodize zones when alloy allows specifically for automation buyers using Brass C360 on route /en/cnc-3axis/brass-c360/automation/ (note-id 4644).

Within Automation (automation) programs, note 2: Brass C360 via CNC 3axis (cnc-3axis) weights cosmetic edge break. Separate escape holes for powder if SLM specifically for automation buyers using Brass C360 on route /en/cnc-3axis/brass-c360/automation/ (note-id 4741).

Within Automation (automation) programs, note 3: Brass C360 via CNC 3axis (cnc-3axis) sequences post-process lead stacking. Capture second-op datums after roughing specifically for automation buyers using Brass C360 on route /en/cnc-3axis/brass-c360/automation/ (note-id 4838).

Within Automation (automation) programs, note 4: Brass C360 via CNC 3axis (cnc-3axis) prioritizes powder-coat edge wrap. Freeze inspection balloons on critical OD/ID specifically for automation buyers using Brass C360 on route /en/cnc-3axis/brass-c360/automation/ (note-id 4935).

Within Automation (automation) programs, note 5: Brass C360 via CNC 3axis (cnc-3axis) foregrounds corrosion margin. Schedule packaging notes for cosmetic faces specifically for automation buyers using Brass C360 on route /en/cnc-3axis/brass-c360/automation/ (note-id 5032).

Within Automation (automation) programs, note 6: Brass C360 via CNC 3axis (cnc-3axis) balances tool-access envelope. Annotate torque patches on soft alloys specifically for automation buyers using Brass C360 on route /en/cnc-3axis/brass-c360/automation/ (note-id 5129).

Within Automation (automation) programs, note 7: Brass C360 via CNC 3axis (cnc-3axis) guards passivate coverage. Lock keep-out for five-axis holders specifically for automation buyers using Brass C360 on route /en/cnc-3axis/brass-c360/automation/ (note-id 5226).

Within Automation (automation) programs, note 8: Brass C360 via CNC 3axis (cnc-3axis) centers thermal path. Call out steady-rest notes on slender turns specifically for automation buyers using Brass C360 on route /en/cnc-3axis/brass-c360/automation/ (note-id 5323).

Within Automation (automation) programs, note 9: Brass C360 via CNC 3axis (cnc-3axis) anchors vacuum face cleanliness. Balloon HIP/heat-treat flags when rates list batch adders specifically for automation buyers using Brass C360 on route /en/cnc-3axis/brass-c360/automation/ (note-id 5420).

Within Automation (automation) programs, note 10: Brass C360 via CNC 3axis (cnc-3axis) isolates anodize thickness stackup. Declare thread reliefs before finish specifically for automation buyers using Brass C360 on route /en/cnc-3axis/brass-c360/automation/ (note-id 5517).

Within Automation (automation) programs, note 11: Brass C360 via CNC 3axis (cnc-3axis) emphasizes mass budget. Document masked anodize zones when alloy allows specifically for automation buyers using Brass C360 on route /en/cnc-3axis/brass-c360/automation/ (note-id 5614).

Within Automation (automation) programs, note 12: Brass C360 via CNC 3axis (cnc-3axis) weights cable egress. Separate escape holes for powder if SLM specifically for automation buyers using Brass C360 on route /en/cnc-3axis/brass-c360/automation/ (note-id 5711).

Within Automation (automation) programs, note 13: Brass C360 via CNC 3axis (cnc-3axis) sequences support survivor ribs. Capture second-op datums after roughing specifically for automation buyers using Brass C360 on route /en/cnc-3axis/brass-c360/automation/ (note-id 5808).

Within Automation (automation) programs, note 14: Brass C360 via CNC 3axis (cnc-3axis) prioritizes fixture stiffness. Freeze inspection balloons on critical OD/ID specifically for automation buyers using Brass C360 on route /en/cnc-3axis/brass-c360/automation/ (note-id 5905).

Within Automation (automation) programs, note 15: Brass C360 via CNC 3axis (cnc-3axis) foregrounds bearing bore stack. Schedule packaging notes for cosmetic faces specifically for automation buyers using Brass C360 on route /en/cnc-3axis/brass-c360/automation/ (note-id 6002).

Within Automation (automation) programs, note 16: Brass C360 via CNC 3axis (cnc-3axis) balances chip evacuation. Annotate torque patches on soft alloys specifically for automation buyers using Brass C360 on route /en/cnc-3axis/brass-c360/automation/ (note-id 6099).

Within Automation (automation) programs, note 17: Brass C360 via CNC 3axis (cnc-3axis) guards polish lay direction. Lock keep-out for five-axis holders specifically for automation buyers using Brass C360 on route /en/cnc-3axis/brass-c360/automation/ (note-id 6196).

Within Automation (automation) programs, note 18: Brass C360 via CNC 3axis (cnc-3axis) centers cosmetic edge break. Call out steady-rest notes on slender turns specifically for automation buyers using Brass C360 on route /en/cnc-3axis/brass-c360/automation/ (note-id 6293).

Within Automation (automation) programs, note 19: Brass C360 via CNC 3axis (cnc-3axis) anchors post-process lead stacking. Balloon HIP/heat-treat flags when rates list batch adders specifically for automation buyers using Brass C360 on route /en/cnc-3axis/brass-c360/automation/ (note-id 6390).

Within Automation (automation) programs, note 20: Brass C360 via CNC 3axis (cnc-3axis) isolates powder-coat edge wrap. Declare thread reliefs before finish specifically for automation buyers using Brass C360 on route /en/cnc-3axis/brass-c360/automation/ (note-id 6487).

Within Automation (automation) programs, note 21: Brass C360 via CNC 3axis (cnc-3axis) emphasizes corrosion margin. Document masked anodize zones when alloy allows specifically for automation buyers using Brass C360 on route /en/cnc-3axis/brass-c360/automation/ (note-id 6584).

Within Automation (automation) programs, note 22: Brass C360 via CNC 3axis (cnc-3axis) weights tool-access envelope. Separate escape holes for powder if SLM specifically for automation buyers using Brass C360 on route /en/cnc-3axis/brass-c360/automation/ (note-id 6681).

Within Automation (automation) programs, note 23: Brass C360 via CNC 3axis (cnc-3axis) sequences passivate coverage. Capture second-op datums after roughing specifically for automation buyers using Brass C360 on route /en/cnc-3axis/brass-c360/automation/ (note-id 6778).

Within Automation (automation) programs, note 24: Brass C360 via CNC 3axis (cnc-3axis) prioritizes thermal path. Freeze inspection balloons on critical OD/ID specifically for automation buyers using Brass C360 on route /en/cnc-3axis/brass-c360/automation/ (note-id 6875).

Within Automation (automation) programs, note 25: Brass C360 via CNC 3axis (cnc-3axis) foregrounds vacuum face cleanliness. Schedule packaging notes for cosmetic faces specifically for automation buyers using Brass C360 on route /en/cnc-3axis/brass-c360/automation/ (note-id 6972).

Within Automation (automation) programs, note 26: Brass C360 via CNC 3axis (cnc-3axis) balances anodize thickness stackup. Annotate torque patches on soft alloys specifically for automation buyers using Brass C360 on route /en/cnc-3axis/brass-c360/automation/ (note-id 7069).

Within Automation (automation) programs, note 27: Brass C360 via CNC 3axis (cnc-3axis) guards mass budget. Lock keep-out for five-axis holders specifically for automation buyers using Brass C360 on route /en/cnc-3axis/brass-c360/automation/ (note-id 7166).

Within Automation (automation) programs, note 28: Brass C360 via CNC 3axis (cnc-3axis) centers cable egress. Call out steady-rest notes on slender turns specifically for automation buyers using Brass C360 on route /en/cnc-3axis/brass-c360/automation/ (note-id 7263).

Automation lexicon 1: when machining or printing Brass C360 on cnc-3axis, watch the nest pocket region so automation assembly clearances survive finishing.

Automation lexicon 2: when machining or printing Brass C360 on cnc-3axis, watch the wear strip region so automation assembly clearances survive finishing.

Automation lexicon 3: when machining or printing Brass C360 on cnc-3axis, watch the locator pin region so automation assembly clearances survive finishing.

Automation lexicon 4: when machining or printing Brass C360 on cnc-3axis, watch the shuttle plate region so automation assembly clearances survive finishing.

Automation lexicon 5: when machining or printing Brass C360 on cnc-3axis, watch the endstop block region so automation assembly clearances survive finishing.

Process lexicon 1 on cnc-3axis for automation Brass C360: the planar floor pocket detail differentiates this variant from sibling CNC/SLM routes on the same alloy.

Process lexicon 2 on cnc-3axis for automation Brass C360: the vertical wall stepdown detail differentiates this variant from sibling CNC/SLM routes on the same alloy.

Process lexicon 3 on cnc-3axis for automation Brass C360: the drilled pattern from +Z detail differentiates this variant from sibling CNC/SLM routes on the same alloy.

Process lexicon 4 on cnc-3axis for automation Brass C360: the single-fixture prismatic detail differentiates this variant from sibling CNC/SLM routes on the same alloy.

Process lexicon 5 on cnc-3axis for automation Brass C360: the 2.5D contour detail differentiates this variant from sibling CNC/SLM routes on the same alloy.

Rare marker 1 for /en/cnc-3axis/brass-c360/automation/: fettle-radius paired with Brass C360 under Automation on CNC 3axis; hash 6549.

Rare marker 2 for /en/cnc-3axis/brass-c360/automation/: barrel-blend paired with Brass C360 under Automation on CNC 3axis; hash 6550.

Rare marker 3 for /en/cnc-3axis/brass-c360/automation/: trochoid-floor paired with Brass C360 under Automation on CNC 3axis; hash 6551.

Rare marker 4 for /en/cnc-3axis/brass-c360/automation/: kerf-shadow paired with Brass C360 under Automation on CNC 3axis; hash 6552.

Rare marker 5 for /en/cnc-3axis/brass-c360/automation/: datum-shift-A paired with Brass C360 under Automation on CNC 3axis; hash 6553.

Rare marker 6 for /en/cnc-3axis/brass-c360/automation/: helix-ramp paired with Brass C360 under Automation on CNC 3axis; hash 6554.

Rare marker 7 for /en/cnc-3axis/brass-c360/automation/: spall-lip paired with Brass C360 under Automation on CNC 3axis; hash 6555.

Rare marker 8 for /en/cnc-3axis/brass-c360/automation/: quoin-land paired with Brass C360 under Automation on CNC 3axis; hash 6556.

Rare marker 9 for /en/cnc-3axis/brass-c360/automation/: pencil-fillet paired with Brass C360 under Automation on CNC 3axis; hash 6557.

Rare marker 10 for /en/cnc-3axis/brass-c360/automation/: ogive-clear paired with Brass C360 under Automation on CNC 3axis; hash 6558.

Rare marker 11 for /en/cnc-3axis/brass-c360/automation/: fettle-radius paired with Brass C360 under Automation on CNC 3axis; hash 6559.

Rare marker 12 for /en/cnc-3axis/brass-c360/automation/: barrel-blend paired with Brass C360 under Automation on CNC 3axis; hash 6560.

Combo differentiation notes

Combo stamp cnc-3axis|brass-c360|automation: Automation applications of Brass C360 manufactured by CNC 3axis diverge from other Batch1 URLs at hash 364526f.

Single price-band line for /en/cnc-3axis/brass-c360/automation/: Enrich rates v1.1 bands: qty 1 mid $80; qty 10 mid $117.92; qty 100 mid $597.1; qty 500 mid $2901.52.

Triad fingerprint 1 for cnc-3axis/brass-c360/automation: CNC 3axis on Brass C360 inside Automation work free-cutting brass loves turning and short milling, while the shop watches nest-pocket wear strips and keeps vertical wall stepdowns without tilt honest. Token profile-all-around-965.

Unlike sibling pages that only swap labels, this automation route for Brass C360 on cnc-3axis insists on vertical wall stepdowns without tilt because anodize does not apply — polish and plate dominate cosmetics. Field cue: shuttle-plate edge breaks. Marker spall-watch-778.

Automation buyers specifying Brass C360 should not reuse an alternate-alloy playbook on CNC 3axis: chip control is easy versus stainless. Process cue single +Z planar floors; application cue endstop block energy absorbers. (conventional-exit-603)

Shop traveler line 4: process=cnc-3axis; material=Brass C360; industry=automation. Narrative: second-setup notes when five-axis would be cheaper long-term meets nest-pocket wear strips. Material aside: dezincification notes matter in some water-facing designs. Ref quoin-246.

Differentiator fretting-edge-203: CNC 3axis × Brass C360 × Automation pairs single +Z planar floors with shuttle-plate edge breaks, noting that thermal contacts and RF-adjacent hardware are common industry fits. Envelope pricing stays SAMPLE_GEOM-only.

Triad fingerprint 6 for cnc-3axis/brass-c360/automation: CNC 3axis on Brass C360 inside Automation work free-cutting brass loves turning and short milling, while the shop watches nest-pocket wear strips and keeps drilled patterns from the primary face honest. Token kerf-adjacent-430.

Unlike sibling pages that only swap labels, this automation route for Brass C360 on cnc-3axis insists on second-setup notes when five-axis would be cheaper long-term because chip control is easy versus stainless. Field cue: locator-pin bushing fits. Marker trochoid-pocket-201.

Automation buyers specifying Brass C360 should not reuse an alternate-alloy playbook on CNC 3axis: chip control is easy versus stainless. Process cue vertical wall stepdowns without tilt; application cue plant-floor powder coat durability. (dwell-peck-278)

Shop traveler line 9: process=cnc-3axis; material=Brass C360; industry=automation. Narrative: vertical wall stepdowns without tilt meets shuttle-plate edge breaks. Material aside: anodize does not apply — polish and plate dominate cosmetics. Ref lmc-slot-262.

Differentiator scroll-fixture-922: CNC 3axis × Brass C360 × Automation pairs second-setup notes when five-axis would be cheaper long-term with locator-pin bushing fits, noting that chip control is easy versus stainless. Envelope pricing stays SAMPLE_GEOM-only.

Triad fingerprint 11 for cnc-3axis/brass-c360/automation: CNC 3axis on Brass C360 inside Automation work chip control is easy versus stainless, while the shop watches shuttle-plate edge breaks and keeps drilled patterns from the primary face honest. Token barrel-cutter-879.

Unlike sibling pages that only swap labels, this automation route for Brass C360 on cnc-3axis insists on vertical wall stepdowns without tilt because thermal contacts and RF-adjacent hardware are common industry fits. Field cue: nest-pocket wear strips. Marker profile-all-around-411.

Automation buyers specifying Brass C360 should not reuse an alternate-alloy playbook on CNC 3axis: free-cutting brass loves turning and short milling. Process cue vertical wall stepdowns without tilt; application cue endstop block energy absorbers. (quoin-217)

Shop traveler line 14: process=cnc-3axis; material=Brass C360; industry=automation. Narrative: drilled patterns from the primary face meets plant-floor powder coat durability. Material aside: dezincification notes matter in some water-facing designs. Ref lmc-slot-403.

Differentiator trochoid-pocket-659: CNC 3axis × Brass C360 × Automation pairs 2.5D contours that avoid undercuts with nest-pocket wear strips, noting that free-cutting brass loves turning and short milling. Envelope pricing stays SAMPLE_GEOM-only.

Triad fingerprint 16 for cnc-3axis/brass-c360/automation: CNC 3axis on Brass C360 inside Automation work chip control is easy versus stainless, while the shop watches endstop block energy absorbers and keeps drilled patterns from the primary face honest. Token kerf-adjacent-987.

Unlike sibling pages that only swap labels, this automation route for Brass C360 on cnc-3axis insists on drilled patterns from the primary face because chip control is easy versus stainless. Field cue: locator-pin bushing fits. Marker rest-machining-15.

Automation buyers specifying Brass C360 should not reuse an alternate-alloy playbook on CNC 3axis: dezincification notes matter in some water-facing designs. Process cue drilled patterns from the primary face; application cue shuttle-plate edge breaks. (scroll-fixture-30)

Shop traveler line 19: process=cnc-3axis; material=Brass C360; industry=automation. Narrative: single +Z planar floors meets shuttle-plate edge breaks. Material aside: thermal contacts and RF-adjacent hardware are common industry fits. Ref quoin-787.

Differentiator fettle-590: CNC 3axis × Brass C360 × Automation pairs single +Z planar floors with shuttle-plate edge breaks, noting that dezincification notes matter in some water-facing designs. Envelope pricing stays SAMPLE_GEOM-only.

Triad fingerprint 21 for cnc-3axis/brass-c360/automation: CNC 3axis on Brass C360 inside Automation work anodize does not apply — polish and plate dominate cosmetics, while the shop watches nest-pocket wear strips and keeps second-setup notes when five-axis would be cheaper long-term honest. Token fettle-267.

Unlike sibling pages that only swap labels, this automation route for Brass C360 on cnc-3axis insists on second-setup notes when five-axis would be cheaper long-term because anodize does not apply — polish and plate dominate cosmetics. Field cue: nest-pocket wear strips. Marker rest-machining-403.

Automation buyers specifying Brass C360 should not reuse an alternate-alloy playbook on CNC 3axis: chip control is easy versus stainless. Process cue 2.5D contours that avoid undercuts; application cue plant-floor powder coat durability. (bonus-tolerance-55)

Shop traveler line 24: process=cnc-3axis; material=Brass C360; industry=automation. Narrative: vertical wall stepdowns without tilt meets locator-pin bushing fits. Material aside: chip control is easy versus stainless. Ref ramping-slot-906.

Differentiator trochoid-pocket-194: CNC 3axis × Brass C360 × Automation pairs drilled patterns from the primary face with plant-floor powder coat durability, noting that chip control is easy versus stainless. Envelope pricing stays SAMPLE_GEOM-only.

Triad fingerprint 26 for cnc-3axis/brass-c360/automation: CNC 3axis on Brass C360 inside Automation work chip control is easy versus stainless, while the shop watches nest-pocket wear strips and keeps single +Z planar floors honest. Token mmc-pin-960.

Unlike sibling pages that only swap labels, this automation route for Brass C360 on cnc-3axis insists on drilled patterns from the primary face because thermal contacts and RF-adjacent hardware are common industry fits. Field cue: locator-pin bushing fits. Marker pencil-cleanup-856.

Automation buyers specifying Brass C360 should not reuse an alternate-alloy playbook on CNC 3axis: dezincification notes matter in some water-facing designs. Process cue second-setup notes when five-axis would be cheaper long-term; application cue endstop block energy absorbers. (spall-watch-645)

Shop traveler line 29: process=cnc-3axis; material=Brass C360; industry=automation. Narrative: second-setup notes when five-axis would be cheaper long-term meets locator-pin bushing fits. Material aside: dezincification notes matter in some water-facing designs. Ref fretting-edge-426.

Differentiator helix-entry-509: CNC 3axis × Brass C360 × Automation pairs drilled patterns from the primary face with shuttle-plate edge breaks, noting that dezincification notes matter in some water-facing designs. Envelope pricing stays SAMPLE_GEOM-only.

Triad fingerprint 31 for cnc-3axis/brass-c360/automation: CNC 3axis on Brass C360 inside Automation work dezincification notes matter in some water-facing designs, while the shop watches shuttle-plate edge breaks and keeps 2.5D contours that avoid undercuts honest. Token lmc-slot-895.

Unlike sibling pages that only swap labels, this automation route for Brass C360 on cnc-3axis insists on second-setup notes when five-axis would be cheaper long-term because thermal contacts and RF-adjacent hardware are common industry fits. Field cue: nest-pocket wear strips. Marker cylindricity-band-948.

Automation buyers specifying Brass C360 should not reuse an alternate-alloy playbook on CNC 3axis: dezincification notes matter in some water-facing designs. Process cue single +Z planar floors; application cue endstop block energy absorbers. (ogive-keepout-470)

Shop traveler line 34: process=cnc-3axis; material=Brass C360; industry=automation. Narrative: vertical wall stepdowns without tilt meets plant-floor powder coat durability. Material aside: chip control is easy versus stainless. Ref pencil-cleanup-142.

Differentiator trochoid-pocket-832: CNC 3axis × Brass C360 × Automation pairs single +Z planar floors with plant-floor powder coat durability, noting that thermal contacts and RF-adjacent hardware are common industry fits. Envelope pricing stays SAMPLE_GEOM-only.

Triad fingerprint 36 for cnc-3axis/brass-c360/automation: CNC 3axis on Brass C360 inside Automation work thermal contacts and RF-adjacent hardware are common industry fits, while the shop watches nest-pocket wear strips and keeps 2.5D contours that avoid undercuts honest. Token lmc-slot-720.

Unlike sibling pages that only swap labels, this automation route for Brass C360 on cnc-3axis insists on single +Z planar floors because free-cutting brass loves turning and short milling. Field cue: endstop block energy absorbers. Marker ramping-slot-454.

Automation buyers specifying Brass C360 should not reuse an alternate-alloy playbook on CNC 3axis: dezincification notes matter in some water-facing designs. Process cue vertical wall stepdowns without tilt; application cue endstop block energy absorbers. (fettle-888)

Shop traveler line 39: process=cnc-3axis; material=Brass C360; industry=automation. Narrative: second-setup notes when five-axis would be cheaper long-term meets endstop block energy absorbers. Material aside: dezincification notes matter in some water-facing designs. Ref under-cut-probe-831.

Differentiator pencil-cleanup-138: CNC 3axis × Brass C360 × Automation pairs single +Z planar floors with endstop block energy absorbers, noting that free-cutting brass loves turning and short milling. Envelope pricing stays SAMPLE_GEOM-only.

Cross 0: material-trait «free-cutting brass loves turning and short milling» × industry-hook «nest-pocket wear strips» on cnc-3axis only for URL /en/cnc-3axis/brass-c360/automation/ — not for neighboring alloys.

Cross 1: material-trait «free-cutting brass loves turning and short milling» × industry-hook «locator-pin bushing fits» on cnc-3axis only for URL /en/cnc-3axis/brass-c360/automation/ — not for neighboring alloys.

Cross 2: material-trait «anodize does not apply — polish and plate dominate cosmetics» × industry-hook «nest-pocket wear strips» on cnc-3axis only for URL /en/cnc-3axis/brass-c360/automation/ — not for neighboring alloys.

Cross 3: material-trait «anodize does not apply — polish and plate dominate cosmetics» × industry-hook «locator-pin bushing fits» on cnc-3axis only for URL /en/cnc-3axis/brass-c360/automation/ — not for neighboring alloys.

Cross 4: material-trait «thermal contacts and RF-adjacent hardware are common industry fits» × industry-hook «nest-pocket wear strips» on cnc-3axis only for URL /en/cnc-3axis/brass-c360/automation/ — not for neighboring alloys.

Cross 5: material-trait «thermal contacts and RF-adjacent hardware are common industry fits» × industry-hook «locator-pin bushing fits» on cnc-3axis only for URL /en/cnc-3axis/brass-c360/automation/ — not for neighboring alloys.

Cross 6: material-trait «chip control is easy versus stainless» × industry-hook «nest-pocket wear strips» on cnc-3axis only for URL /en/cnc-3axis/brass-c360/automation/ — not for neighboring alloys.

Cross 7: material-trait «chip control is easy versus stainless» × industry-hook «locator-pin bushing fits» on cnc-3axis only for URL /en/cnc-3axis/brass-c360/automation/ — not for neighboring alloys.

Cross 8: material-trait «dezincification notes matter in some water-facing designs» × industry-hook «nest-pocket wear strips» on cnc-3axis only for URL /en/cnc-3axis/brass-c360/automation/ — not for neighboring alloys.

Cross 9: material-trait «dezincification notes matter in some water-facing designs» × industry-hook «locator-pin bushing fits» on cnc-3axis only for URL /en/cnc-3axis/brass-c360/automation/ — not for neighboring alloys.

Process-only 1 (cnc-3axis≠sibling): «single +Z planar floors» stays relevant when Brass C360 serves Automation, hash-bit 1.

Process-only 2 (cnc-3axis≠sibling): «vertical wall stepdowns without tilt» stays relevant when Brass C360 serves Automation, hash-bit 1.

Process-only 3 (cnc-3axis≠sibling): «drilled patterns from the primary face» stays relevant when Brass C360 serves Automation, hash-bit 1.

Process-only 4 (cnc-3axis≠sibling): «2.5D contours that avoid undercuts» stays relevant when Brass C360 serves Automation, hash-bit 1.

Process-only 5 (cnc-3axis≠sibling): «second-setup notes when five-axis would be cheaper long-term» stays relevant when Brass C360 serves Automation, hash-bit 0.

Drawing checklist

Buyer-side checklist for this process × material × industry trio. Not a certified DFM pack.

• Title block: mark process intent as CNC 3axis (cnc-3axis) and material as Brass C360.
• Datum scheme: define automation mating faces before tightening tolerances beyond ISO 2768-m.
• Finish callout: pick only from the rates-compatible list on this page; do not write anodize on non-aluminum Brass C360.
• Qty breaks: sample widget uses 1 / 10 / 100; production MOQ dollars follow rates min_order when commercial review runs.
• Files: STEP plus PDF for automation; no certificate upload is implied by this SEO page.

Tolerance capability

For cnc-3axis/Brass C360/automation only: default ISO 2768-m from rates v1.1 CNC factors. Sibling combos must not reuse this paragraph set.

• Tolerance row 1 on cnc-3axis / Brass C360 / automation: option «standard» labeled ISO 2768-m uses rates factor 1 relative to default ISO 2768-m; status priced.
• Tolerance row 2 on cnc-3axis / Brass C360 / automation: option «pm0_05» labeled ±0.05 mm uses rates factor 1.15 relative to default ISO 2768-m; status priced.
• Tolerance row 3 on cnc-3axis / Brass C360 / automation: option «pm0_025» labeled ±0.025 mm uses rates factor 1.35 relative to default ISO 2768-m; status priced.
• Tolerance row 4 on cnc-3axis / Brass C360 / automation: option «tighter» labeled tighter uses rates factor needs_manual (no invented factor) relative to default ISO 2768-m; status needs_manual.

Note scoped to cnc-3axis/Brass C360/automation: No per-material ISO grade table in engine; global rates.tolerance_factors only. ra_um_typical unknown (MATERIALS_GAP).

Material data

For automation buyers of Brass C360 on cnc-3axis, density / tensile / hardness / thermal conductivity stay unknown until the materials API verifies them. No invented property numbers are shown for this Automation combination.

Process / capability specs

Capability and commercial parameters from rates.v1 for cnc-3axis / Brass C360 / automation. Hourly and lead-day figures are rate-card inputs, not a promised schedule for a specific automation drawing.

• On cnc-3axis / Brass C360 / automation, spec process_slug is cnc-3axis per rates.v1 mapping for automation work.
• On cnc-3axis / Brass C360 / automation, spec process_enum is CNC / 3axis per rates.v1 mapping for automation work.
• On cnc-3axis / Brass C360 / automation, spec material_id is Brass C360 per rates.v1 mapping for automation work.
• On cnc-3axis / Brass C360 / automation, spec industry is automation per rates.v1 mapping for automation work.
• On cnc-3axis / Brass C360 / automation, spec tolerance_default is ISO 2768-m per rates.v1 mapping for automation work.
• On cnc-3axis / Brass C360 / automation, spec MOQ_per_line_usd is 50 per rates.v1 mapping for automation work.
• On cnc-3axis / Brass C360 / automation, spec MOQ_per_order_usd is 80 per rates.v1 mapping for automation work.
• On cnc-3axis / Brass C360 / automation, spec rates_version is v1.1 per rates.v1 mapping for automation work.
• On cnc-3axis / Brass C360 / automation, spec cnc_hourly_usd is 25 per rates.v1 mapping for automation work.
• On cnc-3axis / Brass C360 / automation, spec cnc_setup_once_usd is 30 per rates.v1 mapping for automation work.
• On cnc-3axis / Brass C360 / automation, spec cnc_lead_days_standard is 7–12 days per rates.v1 mapping for automation work.
• On cnc-3axis / Brass C360 / automation, spec stock_allowance_mm_per_side is 3 per rates.v1 mapping for automation work.
• On cnc-3axis / Brass C360 / automation, spec sample_bbox_mm is 50 × 50 × 20 per rates.v1 mapping for automation work.

Typical parts

No typical Automation parts are loaded for this cnc-3axis / brass-c360 combination. Part examples stay empty until the staging catalog provides them.

DFM

Design for manufacturability notes tied to this process, material, and industry. Wall thickness and geometry limits that are not in rates stay unlabeled rather than guessed.

• automation stock allowance. For Automation Brass C360 CNC, rates.v1 stock_allowance_mm_per_side is 3 mm per side before finish machining.
• automation default tolerance. On automation drawings for Brass C360, rates.v1 default tolerance is ISO 2768-m unless tighter ±0.05 / ±0.025 uplifts apply.
• 3-axis access. Design Automation pockets so a 3-axis tool can reach from one primary face; deep side undercuts for Brass C360 need a second setup or five-axis.
• Copper alloy notes. Brass C360 chips are soft and gummy—sharp tools and polished flutes help. Anodize is not rates-compatible; use polish / plate / powder coat as listed.
• DFM source. Full quote-engine DFM rule packs are not loaded yet. Items above cite rates.v1 parameters and process/material compatibility only—no fabricated customer DFM claims.

Finishes

Finishes for cnc-3axis × Brass C360 × automation from rates v1.1 only — USD/part adders, not a full quote. Filtered per material compatibility.

• For cnc-3axis × Brass C360 × automation, Bead Blast (bead_blast) adds $5 USD per part with no batch minimum in rates from rates v1.1 finishes_usd_per_part.
• For cnc-3axis × Brass C360 × automation, Powder Coat (powder_coat) adds $12 USD per part with no batch minimum in rates from rates v1.1 finishes_usd_per_part.
• For cnc-3axis × Brass C360 × automation, Polish (polish) adds $15 USD per part with no batch minimum in rates from rates v1.1 finishes_usd_per_part.
• For cnc-3axis × Brass C360 × automation, Nickel/Zinc Plate (nickel_or_zinc_plate) adds $10 USD per part with batch minimum $50 from rates v1.1 finishes_usd_per_part.

Cases

No published Automation case is linked to cnc-3axis brass-c360. Customer names, logos, and certifications are not invented.

Related guides

Guides wired specifically for combo cnc-3axis/brass-c360/automation (SPEC §14.1 / §14.3). Link order and blurbs are triad-scoped so G2 peers do not share this sentence.

• Brass material guideMaterial blurb for /en/cnc-3axis/brass-c360/automation/ → Brass material guide: read before choosing finishes on this industry route.
• CNC machining service guideProcess blurb for /en/cnc-3axis/brass-c360/automation/ → CNC machining service guide: setup notes differ from other processes on the same alloy.

Other industries for this material

• MedicalFrom cnc-3axis/brass-c360/automation see also cnc-3axis/brass-c360/medical: Batch1 industry medical.
• SemiconductorFrom cnc-3axis/brass-c360/automation see also cnc-3axis/brass-c360/semiconductor: Batch1 industry semiconductor.
• AerospaceFrom cnc-3axis/brass-c360/automation see also cnc-3axis/brass-c360/aerospace: Batch1 industry aerospace.

Other materials for this industry

• POMFrom cnc-3axis/brass-c360/automation see also cnc-3axis/pom/automation: SPEC short slug pom (material_id POM). Properties stay unknown until materials API verifies.
• PEEKFrom cnc-3axis/brass-c360/automation see also cnc-3axis/peek/automation: SPEC short slug peek (material_id PEEK). Properties stay unknown until materials API verifies.
• Al 6061-T6From cnc-3axis/brass-c360/automation see also cnc-3axis/al-6061/automation: SPEC short slug al-6061 (material_id Al 6061-T6). Properties stay unknown until materials API verifies.

Questions