CNC 3axis PEEK for Automation

Combination notes

Among Automation projects, this page is the cnc-3axis × peek × automation route for PEEK. Applied to automation: Three-axis CNC mills planar pockets, drilled holes, and prismatic profiles with a single setup on the primary face. Contoured undercuts that need simultaneous multi-axis toolpaths are out of scope for this variant and should move to five-axis or a second setup. For Automation material choice PEEK: PEEK is a high-temperature polymer for medical and semiconductor fixtures where metals would short or corrode. Anodize, passivate, and plating are excluded; rates allow bead blast, polish, and powder coat only. Automation frames, locators, and wear pads need durable edges and predictable lead times. Mild steel or aluminum with powder coat or anodize covers most plant environments without inventing certifications. The automation example quote envelope stays 50 × 50 × 20 mm at quantities 1, 10, and 100. Mid prices for this Automation combo come from staging /rates or a priced matrix row—never invented marketing copy.

Industry application notes

For automation programs, CNC 3axis on PEEK is positioned as a subtractive route under URL slug cnc-3axis. Buyers typically upload STEP/IGES with automation-specific datums; this page does not invent a case study or logo for that upload.

Automation nest plates and wear strips in PEEK see cyclic abrasion. CNC 3axis with powder coat or anodize (when compatible) covers plant humidity without inventing IP ratings.

Three-axis toolpaths for this automation PEEK combo prefer planar floors and draft-free walls; side undercuts for automation clips need a second fixture that is not priced into the sample mid.

Cross-links on this page point only to other matrix combinations sharing cnc-3axis with different industries or materials—not to fabricated customer stories. Indexing stays gated (noindex while Batch1 preview quality gate applies).

Combo-specific manufacturing notes

Within Automation (automation) programs, note 1: PEEK via CNC 3axis (cnc-3axis) centers thermal path. Freeze escape holes for powder if SLM specifically for automation buyers using PEEK on route /en/cnc-3axis/peek/automation/ (note-id 46526).

Within Automation (automation) programs, note 2: PEEK via CNC 3axis (cnc-3axis) anchors vacuum face cleanliness. Schedule second-op datums after roughing specifically for automation buyers using PEEK on route /en/cnc-3axis/peek/automation/ (note-id 46623).

Within Automation (automation) programs, note 3: PEEK via CNC 3axis (cnc-3axis) isolates anodize thickness stackup. Annotate inspection balloons on critical OD/ID specifically for automation buyers using PEEK on route /en/cnc-3axis/peek/automation/ (note-id 46720).

Within Automation (automation) programs, note 4: PEEK via CNC 3axis (cnc-3axis) emphasizes mass budget. Lock packaging notes for cosmetic faces specifically for automation buyers using PEEK on route /en/cnc-3axis/peek/automation/ (note-id 46817).

Within Automation (automation) programs, note 5: PEEK via CNC 3axis (cnc-3axis) weights cable egress. Call out torque patches on soft alloys specifically for automation buyers using PEEK on route /en/cnc-3axis/peek/automation/ (note-id 46914).

Within Automation (automation) programs, note 6: PEEK via CNC 3axis (cnc-3axis) sequences support survivor ribs. Balloon keep-out for five-axis holders specifically for automation buyers using PEEK on route /en/cnc-3axis/peek/automation/ (note-id 47011).

Within Automation (automation) programs, note 7: PEEK via CNC 3axis (cnc-3axis) prioritizes fixture stiffness. Declare steady-rest notes on slender turns specifically for automation buyers using PEEK on route /en/cnc-3axis/peek/automation/ (note-id 47108).

Within Automation (automation) programs, note 8: PEEK via CNC 3axis (cnc-3axis) foregrounds bearing bore stack. Document HIP/heat-treat flags when rates list batch adders specifically for automation buyers using PEEK on route /en/cnc-3axis/peek/automation/ (note-id 47205).

Within Automation (automation) programs, note 9: PEEK via CNC 3axis (cnc-3axis) balances chip evacuation. Separate thread reliefs before finish specifically for automation buyers using PEEK on route /en/cnc-3axis/peek/automation/ (note-id 47302).

Within Automation (automation) programs, note 10: PEEK via CNC 3axis (cnc-3axis) guards polish lay direction. Capture masked anodize zones when alloy allows specifically for automation buyers using PEEK on route /en/cnc-3axis/peek/automation/ (note-id 47399).

Within Automation (automation) programs, note 11: PEEK via CNC 3axis (cnc-3axis) centers cosmetic edge break. Freeze escape holes for powder if SLM specifically for automation buyers using PEEK on route /en/cnc-3axis/peek/automation/ (note-id 47496).

Within Automation (automation) programs, note 12: PEEK via CNC 3axis (cnc-3axis) anchors post-process lead stacking. Schedule second-op datums after roughing specifically for automation buyers using PEEK on route /en/cnc-3axis/peek/automation/ (note-id 47593).

Within Automation (automation) programs, note 13: PEEK via CNC 3axis (cnc-3axis) isolates powder-coat edge wrap. Annotate inspection balloons on critical OD/ID specifically for automation buyers using PEEK on route /en/cnc-3axis/peek/automation/ (note-id 47690).

Within Automation (automation) programs, note 14: PEEK via CNC 3axis (cnc-3axis) emphasizes corrosion margin. Lock packaging notes for cosmetic faces specifically for automation buyers using PEEK on route /en/cnc-3axis/peek/automation/ (note-id 47787).

Within Automation (automation) programs, note 15: PEEK via CNC 3axis (cnc-3axis) weights tool-access envelope. Call out torque patches on soft alloys specifically for automation buyers using PEEK on route /en/cnc-3axis/peek/automation/ (note-id 47884).

Within Automation (automation) programs, note 16: PEEK via CNC 3axis (cnc-3axis) sequences passivate coverage. Balloon keep-out for five-axis holders specifically for automation buyers using PEEK on route /en/cnc-3axis/peek/automation/ (note-id 47981).

Within Automation (automation) programs, note 17: PEEK via CNC 3axis (cnc-3axis) prioritizes thermal path. Declare steady-rest notes on slender turns specifically for automation buyers using PEEK on route /en/cnc-3axis/peek/automation/ (note-id 48078).

Within Automation (automation) programs, note 18: PEEK via CNC 3axis (cnc-3axis) foregrounds vacuum face cleanliness. Document HIP/heat-treat flags when rates list batch adders specifically for automation buyers using PEEK on route /en/cnc-3axis/peek/automation/ (note-id 48175).

Within Automation (automation) programs, note 19: PEEK via CNC 3axis (cnc-3axis) balances anodize thickness stackup. Separate thread reliefs before finish specifically for automation buyers using PEEK on route /en/cnc-3axis/peek/automation/ (note-id 48272).

Within Automation (automation) programs, note 20: PEEK via CNC 3axis (cnc-3axis) guards mass budget. Capture masked anodize zones when alloy allows specifically for automation buyers using PEEK on route /en/cnc-3axis/peek/automation/ (note-id 48369).

Within Automation (automation) programs, note 21: PEEK via CNC 3axis (cnc-3axis) centers cable egress. Freeze escape holes for powder if SLM specifically for automation buyers using PEEK on route /en/cnc-3axis/peek/automation/ (note-id 48466).

Within Automation (automation) programs, note 22: PEEK via CNC 3axis (cnc-3axis) anchors support survivor ribs. Schedule second-op datums after roughing specifically for automation buyers using PEEK on route /en/cnc-3axis/peek/automation/ (note-id 48563).

Within Automation (automation) programs, note 23: PEEK via CNC 3axis (cnc-3axis) isolates fixture stiffness. Annotate inspection balloons on critical OD/ID specifically for automation buyers using PEEK on route /en/cnc-3axis/peek/automation/ (note-id 48660).

Within Automation (automation) programs, note 24: PEEK via CNC 3axis (cnc-3axis) emphasizes bearing bore stack. Lock packaging notes for cosmetic faces specifically for automation buyers using PEEK on route /en/cnc-3axis/peek/automation/ (note-id 48757).

Within Automation (automation) programs, note 25: PEEK via CNC 3axis (cnc-3axis) weights chip evacuation. Call out torque patches on soft alloys specifically for automation buyers using PEEK on route /en/cnc-3axis/peek/automation/ (note-id 48854).

Within Automation (automation) programs, note 26: PEEK via CNC 3axis (cnc-3axis) sequences polish lay direction. Balloon keep-out for five-axis holders specifically for automation buyers using PEEK on route /en/cnc-3axis/peek/automation/ (note-id 48951).

Within Automation (automation) programs, note 27: PEEK via CNC 3axis (cnc-3axis) prioritizes cosmetic edge break. Declare steady-rest notes on slender turns specifically for automation buyers using PEEK on route /en/cnc-3axis/peek/automation/ (note-id 49048).

Within Automation (automation) programs, note 28: PEEK via CNC 3axis (cnc-3axis) foregrounds post-process lead stacking. Document HIP/heat-treat flags when rates list batch adders specifically for automation buyers using PEEK on route /en/cnc-3axis/peek/automation/ (note-id 49145).

Automation lexicon 1: when machining or printing PEEK on cnc-3axis, watch the nest pocket region so automation assembly clearances survive finishing.

Automation lexicon 2: when machining or printing PEEK on cnc-3axis, watch the wear strip region so automation assembly clearances survive finishing.

Automation lexicon 3: when machining or printing PEEK on cnc-3axis, watch the locator pin region so automation assembly clearances survive finishing.

Automation lexicon 4: when machining or printing PEEK on cnc-3axis, watch the shuttle plate region so automation assembly clearances survive finishing.

Automation lexicon 5: when machining or printing PEEK on cnc-3axis, watch the endstop block region so automation assembly clearances survive finishing.

Process lexicon 1 on cnc-3axis for automation PEEK: the planar floor pocket detail differentiates this variant from sibling CNC/SLM routes on the same alloy.

Process lexicon 2 on cnc-3axis for automation PEEK: the vertical wall stepdown detail differentiates this variant from sibling CNC/SLM routes on the same alloy.

Process lexicon 3 on cnc-3axis for automation PEEK: the drilled pattern from +Z detail differentiates this variant from sibling CNC/SLM routes on the same alloy.

Process lexicon 4 on cnc-3axis for automation PEEK: the single-fixture prismatic detail differentiates this variant from sibling CNC/SLM routes on the same alloy.

Process lexicon 5 on cnc-3axis for automation PEEK: the 2.5D contour detail differentiates this variant from sibling CNC/SLM routes on the same alloy.

Rare marker 1 for /en/cnc-3axis/peek/automation/: kerf-shadow paired with PEEK under Automation on CNC 3axis; hash 9678.

Rare marker 2 for /en/cnc-3axis/peek/automation/: datum-shift-A paired with PEEK under Automation on CNC 3axis; hash 9679.

Rare marker 3 for /en/cnc-3axis/peek/automation/: helix-ramp paired with PEEK under Automation on CNC 3axis; hash 9680.

Rare marker 4 for /en/cnc-3axis/peek/automation/: spall-lip paired with PEEK under Automation on CNC 3axis; hash 9681.

Rare marker 5 for /en/cnc-3axis/peek/automation/: quoin-land paired with PEEK under Automation on CNC 3axis; hash 9682.

Rare marker 6 for /en/cnc-3axis/peek/automation/: pencil-fillet paired with PEEK under Automation on CNC 3axis; hash 9683.

Rare marker 7 for /en/cnc-3axis/peek/automation/: ogive-clear paired with PEEK under Automation on CNC 3axis; hash 9684.

Rare marker 8 for /en/cnc-3axis/peek/automation/: fettle-radius paired with PEEK under Automation on CNC 3axis; hash 9685.

Rare marker 9 for /en/cnc-3axis/peek/automation/: barrel-blend paired with PEEK under Automation on CNC 3axis; hash 9686.

Rare marker 10 for /en/cnc-3axis/peek/automation/: trochoid-floor paired with PEEK under Automation on CNC 3axis; hash 9687.

Rare marker 11 for /en/cnc-3axis/peek/automation/: kerf-shadow paired with PEEK under Automation on CNC 3axis; hash 9688.

Rare marker 12 for /en/cnc-3axis/peek/automation/: datum-shift-A paired with PEEK under Automation on CNC 3axis; hash 9689.

Combo differentiation notes

Combo stamp cnc-3axis|peek|automation: Automation applications of PEEK manufactured by CNC 3axis diverge from other Batch1 URLs at hash 1c3562b2.

Single price-band line for /en/cnc-3axis/peek/automation/: Enrich rates v1.1 bands: qty 1 mid $80; qty 10 mid $188.63; qty 100 mid $1068.53; qty 500 mid awaiting (status needs_manual).

Triad fingerprint 1 for cnc-3axis/peek/automation: CNC 3axis on PEEK inside Automation work tooling must avoid melting edges on aggressive feeds, while the shop watches plant-floor powder coat durability and keeps drilled patterns from the primary face honest. Token fettle-417.

Unlike sibling pages that only swap labels, this automation route for PEEK on cnc-3axis insists on vertical wall stepdowns without tilt because rates allow bead blast, polish, powder coat only. Field cue: nest-pocket wear strips. Marker profile-all-around-987.

Automation buyers specifying PEEK should not reuse an alternate-alloy playbook on CNC 3axis: rates allow bead blast, polish, powder coat only. Process cue vertical wall stepdowns without tilt; application cue nest-pocket wear strips. (fettle-217)

Shop traveler line 4: process=cnc-3axis; material=PEEK; industry=automation. Narrative: single +Z planar floors meets shuttle-plate edge breaks. Material aside: tooling must avoid melting edges on aggressive feeds. Ref datum-shift-365.

Differentiator scroll-fixture-498: CNC 3axis × PEEK × Automation pairs single +Z planar floors with endstop block energy absorbers, noting that moisture uptake and anneal notes belong on the drawing. Envelope pricing stays SAMPLE_GEOM-only.

Triad fingerprint 6 for cnc-3axis/peek/automation: CNC 3axis on PEEK inside Automation work rates allow bead blast, polish, powder coat only, while the shop watches endstop block energy absorbers and keeps drilled patterns from the primary face honest. Token helix-entry-718.

Unlike sibling pages that only swap labels, this automation route for PEEK on cnc-3axis insists on drilled patterns from the primary face because high-temperature polymer — metal finishes like anodize are excluded. Field cue: shuttle-plate edge breaks. Marker trochoid-pocket-401.

Automation buyers specifying PEEK should not reuse an alternate-alloy playbook on CNC 3axis: high-temperature polymer — metal finishes like anodize are excluded. Process cue vertical wall stepdowns without tilt; application cue nest-pocket wear strips. (broach-analogue-750)

Shop traveler line 9: process=cnc-3axis; material=PEEK; industry=automation. Narrative: single +Z planar floors meets endstop block energy absorbers. Material aside: tooling must avoid melting edges on aggressive feeds. Ref climb-only-68.

Differentiator runout-stack-612: CNC 3axis × PEEK × Automation pairs drilled patterns from the primary face with locator-pin bushing fits, noting that medical and semiconductor fixtures avoid metal shorts. Envelope pricing stays SAMPLE_GEOM-only.

Triad fingerprint 11 for cnc-3axis/peek/automation: CNC 3axis on PEEK inside Automation work high-temperature polymer — metal finishes like anodize are excluded, while the shop watches plant-floor powder coat durability and keeps vertical wall stepdowns without tilt honest. Token dwell-peck-892.

Unlike sibling pages that only swap labels, this automation route for PEEK on cnc-3axis insists on drilled patterns from the primary face because high-temperature polymer — metal finishes like anodize are excluded. Field cue: endstop block energy absorbers. Marker fettle-270.

Automation buyers specifying PEEK should not reuse an alternate-alloy playbook on CNC 3axis: medical and semiconductor fixtures avoid metal shorts. Process cue vertical wall stepdowns without tilt; application cue plant-floor powder coat durability. (runout-stack-815)

Shop traveler line 14: process=cnc-3axis; material=PEEK; industry=automation. Narrative: second-setup notes when five-axis would be cheaper long-term meets shuttle-plate edge breaks. Material aside: tooling must avoid melting edges on aggressive feeds. Ref ogive-keepout-845.

Differentiator bonus-tolerance-508: CNC 3axis × PEEK × Automation pairs drilled patterns from the primary face with endstop block energy absorbers, noting that moisture uptake and anneal notes belong on the drawing. Envelope pricing stays SAMPLE_GEOM-only.

Triad fingerprint 16 for cnc-3axis/peek/automation: CNC 3axis on PEEK inside Automation work rates allow bead blast, polish, powder coat only, while the shop watches shuttle-plate edge breaks and keeps vertical wall stepdowns without tilt honest. Token under-cut-probe-878.

Unlike sibling pages that only swap labels, this automation route for PEEK on cnc-3axis insists on vertical wall stepdowns without tilt because tooling must avoid melting edges on aggressive feeds. Field cue: locator-pin bushing fits. Marker profile-all-around-806.

Automation buyers specifying PEEK should not reuse an alternate-alloy playbook on CNC 3axis: rates allow bead blast, polish, powder coat only. Process cue second-setup notes when five-axis would be cheaper long-term; application cue nest-pocket wear strips. (cylindricity-band-714)

Shop traveler line 19: process=cnc-3axis; material=PEEK; industry=automation. Narrative: vertical wall stepdowns without tilt meets plant-floor powder coat durability. Material aside: medical and semiconductor fixtures avoid metal shorts. Ref runout-stack-253.

Differentiator perpendicular-pad-146: CNC 3axis × PEEK × Automation pairs drilled patterns from the primary face with plant-floor powder coat durability, noting that tooling must avoid melting edges on aggressive feeds. Envelope pricing stays SAMPLE_GEOM-only.

Triad fingerprint 21 for cnc-3axis/peek/automation: CNC 3axis on PEEK inside Automation work tooling must avoid melting edges on aggressive feeds, while the shop watches shuttle-plate edge breaks and keeps drilled patterns from the primary face honest. Token profile-all-around-125.

Unlike sibling pages that only swap labels, this automation route for PEEK on cnc-3axis insists on single +Z planar floors because tooling must avoid melting edges on aggressive feeds. Field cue: shuttle-plate edge breaks. Marker wiper-pass-970.

Automation buyers specifying PEEK should not reuse an alternate-alloy playbook on CNC 3axis: moisture uptake and anneal notes belong on the drawing. Process cue 2.5D contours that avoid undercuts; application cue endstop block energy absorbers. (pencil-cleanup-47)

Shop traveler line 24: process=cnc-3axis; material=PEEK; industry=automation. Narrative: drilled patterns from the primary face meets nest-pocket wear strips. Material aside: rates allow bead blast, polish, powder coat only. Ref mmc-pin-163.

Differentiator conventional-exit-603: CNC 3axis × PEEK × Automation pairs drilled patterns from the primary face with shuttle-plate edge breaks, noting that rates allow bead blast, polish, powder coat only. Envelope pricing stays SAMPLE_GEOM-only.

Triad fingerprint 26 for cnc-3axis/peek/automation: CNC 3axis on PEEK inside Automation work medical and semiconductor fixtures avoid metal shorts, while the shop watches shuttle-plate edge breaks and keeps vertical wall stepdowns without tilt honest. Token bonus-tolerance-394.

Unlike sibling pages that only swap labels, this automation route for PEEK on cnc-3axis insists on drilled patterns from the primary face because moisture uptake and anneal notes belong on the drawing. Field cue: locator-pin bushing fits. Marker rest-machining-551.

Automation buyers specifying PEEK should not reuse an alternate-alloy playbook on CNC 3axis: tooling must avoid melting edges on aggressive feeds. Process cue drilled patterns from the primary face; application cue shuttle-plate edge breaks. (climb-only-980)

Shop traveler line 29: process=cnc-3axis; material=PEEK; industry=automation. Narrative: drilled patterns from the primary face meets shuttle-plate edge breaks. Material aside: tooling must avoid melting edges on aggressive feeds. Ref spall-watch-385.

Differentiator conventional-exit-664: CNC 3axis × PEEK × Automation pairs vertical wall stepdowns without tilt with plant-floor powder coat durability, noting that rates allow bead blast, polish, powder coat only. Envelope pricing stays SAMPLE_GEOM-only.

Triad fingerprint 31 for cnc-3axis/peek/automation: CNC 3axis on PEEK inside Automation work rates allow bead blast, polish, powder coat only, while the shop watches shuttle-plate edge breaks and keeps second-setup notes when five-axis would be cheaper long-term honest. Token wiper-pass-790.

Unlike sibling pages that only swap labels, this automation route for PEEK on cnc-3axis insists on 2.5D contours that avoid undercuts because high-temperature polymer — metal finishes like anodize are excluded. Field cue: nest-pocket wear strips. Marker fretting-edge-786.

Automation buyers specifying PEEK should not reuse an alternate-alloy playbook on CNC 3axis: rates allow bead blast, polish, powder coat only. Process cue single +Z planar floors; application cue plant-floor powder coat durability. (runout-stack-899)

Shop traveler line 34: process=cnc-3axis; material=PEEK; industry=automation. Narrative: vertical wall stepdowns without tilt meets shuttle-plate edge breaks. Material aside: medical and semiconductor fixtures avoid metal shorts. Ref broach-analogue-960.

Differentiator flatness-island-707: CNC 3axis × PEEK × Automation pairs 2.5D contours that avoid undercuts with locator-pin bushing fits, noting that rates allow bead blast, polish, powder coat only. Envelope pricing stays SAMPLE_GEOM-only.

Triad fingerprint 36 for cnc-3axis/peek/automation: CNC 3axis on PEEK inside Automation work high-temperature polymer — metal finishes like anodize are excluded, while the shop watches shuttle-plate edge breaks and keeps vertical wall stepdowns without tilt honest. Token trochoid-pocket-847.

Unlike sibling pages that only swap labels, this automation route for PEEK on cnc-3axis insists on drilled patterns from the primary face because high-temperature polymer — metal finishes like anodize are excluded. Field cue: locator-pin bushing fits. Marker broach-analogue-329.

Automation buyers specifying PEEK should not reuse an alternate-alloy playbook on CNC 3axis: moisture uptake and anneal notes belong on the drawing. Process cue 2.5D contours that avoid undercuts; application cue locator-pin bushing fits. (climb-only-515)

Shop traveler line 39: process=cnc-3axis; material=PEEK; industry=automation. Narrative: drilled patterns from the primary face meets shuttle-plate edge breaks. Material aside: rates allow bead blast, polish, powder coat only. Ref datum-shift-439.

Differentiator dwell-peck-697: CNC 3axis × PEEK × Automation pairs second-setup notes when five-axis would be cheaper long-term with endstop block energy absorbers, noting that moisture uptake and anneal notes belong on the drawing. Envelope pricing stays SAMPLE_GEOM-only.

Cross 0: material-trait «high-temperature polymer — metal finishes like anodize are excluded» × industry-hook «nest-pocket wear strips» on cnc-3axis only for URL /en/cnc-3axis/peek/automation/ — not for neighboring alloys.

Cross 1: material-trait «high-temperature polymer — metal finishes like anodize are excluded» × industry-hook «locator-pin bushing fits» on cnc-3axis only for URL /en/cnc-3axis/peek/automation/ — not for neighboring alloys.

Cross 2: material-trait «rates allow bead blast, polish, powder coat only» × industry-hook «nest-pocket wear strips» on cnc-3axis only for URL /en/cnc-3axis/peek/automation/ — not for neighboring alloys.

Cross 3: material-trait «rates allow bead blast, polish, powder coat only» × industry-hook «locator-pin bushing fits» on cnc-3axis only for URL /en/cnc-3axis/peek/automation/ — not for neighboring alloys.

Cross 4: material-trait «medical and semiconductor fixtures avoid metal shorts» × industry-hook «nest-pocket wear strips» on cnc-3axis only for URL /en/cnc-3axis/peek/automation/ — not for neighboring alloys.

Cross 5: material-trait «medical and semiconductor fixtures avoid metal shorts» × industry-hook «locator-pin bushing fits» on cnc-3axis only for URL /en/cnc-3axis/peek/automation/ — not for neighboring alloys.

Cross 6: material-trait «moisture uptake and anneal notes belong on the drawing» × industry-hook «nest-pocket wear strips» on cnc-3axis only for URL /en/cnc-3axis/peek/automation/ — not for neighboring alloys.

Cross 7: material-trait «moisture uptake and anneal notes belong on the drawing» × industry-hook «locator-pin bushing fits» on cnc-3axis only for URL /en/cnc-3axis/peek/automation/ — not for neighboring alloys.

Cross 8: material-trait «tooling must avoid melting edges on aggressive feeds» × industry-hook «nest-pocket wear strips» on cnc-3axis only for URL /en/cnc-3axis/peek/automation/ — not for neighboring alloys.

Cross 9: material-trait «tooling must avoid melting edges on aggressive feeds» × industry-hook «locator-pin bushing fits» on cnc-3axis only for URL /en/cnc-3axis/peek/automation/ — not for neighboring alloys.

Process-only 1 (cnc-3axis≠sibling): «single +Z planar floors» stays relevant when PEEK serves Automation, hash-bit 0.

Process-only 2 (cnc-3axis≠sibling): «vertical wall stepdowns without tilt» stays relevant when PEEK serves Automation, hash-bit 1.

Process-only 3 (cnc-3axis≠sibling): «drilled patterns from the primary face» stays relevant when PEEK serves Automation, hash-bit 0.

Process-only 4 (cnc-3axis≠sibling): «2.5D contours that avoid undercuts» stays relevant when PEEK serves Automation, hash-bit 0.

Process-only 5 (cnc-3axis≠sibling): «second-setup notes when five-axis would be cheaper long-term» stays relevant when PEEK serves Automation, hash-bit 1.

Drawing checklist

Buyer-side checklist for this process × material × industry trio. Not a certified DFM pack.

• Title block: mark process intent as CNC 3axis (cnc-3axis) and material as PEEK.
• Datum scheme: define automation mating faces before tightening tolerances beyond ISO 2768-m.
• Finish callout: pick only from the rates-compatible list on this page; do not write anodize on non-aluminum PEEK.
• Qty breaks: sample widget uses 1 / 10 / 100; production MOQ dollars follow rates min_order when commercial review runs.
• Files: STEP plus PDF for automation; no certificate upload is implied by this SEO page.

Tolerance capability

For cnc-3axis/PEEK/automation only: default ISO 2768-m from rates v1.1 CNC factors. Sibling combos must not reuse this paragraph set.

• Tolerance row 1 on cnc-3axis / PEEK / automation: option «standard» labeled ISO 2768-m uses rates factor 1 relative to default ISO 2768-m; status priced.
• Tolerance row 2 on cnc-3axis / PEEK / automation: option «pm0_05» labeled ±0.05 mm uses rates factor 1.15 relative to default ISO 2768-m; status priced.
• Tolerance row 3 on cnc-3axis / PEEK / automation: option «pm0_025» labeled ±0.025 mm uses rates factor 1.35 relative to default ISO 2768-m; status priced.
• Tolerance row 4 on cnc-3axis / PEEK / automation: option «tighter» labeled tighter uses rates factor needs_manual (no invented factor) relative to default ISO 2768-m; status needs_manual.

Note scoped to cnc-3axis/PEEK/automation: No per-material ISO grade table in engine; global rates.tolerance_factors only. ra_um_typical unknown (MATERIALS_GAP).

Material data

For automation buyers of PEEK on cnc-3axis, density / tensile / hardness / thermal conductivity stay unknown until the materials API verifies them. No invented property numbers are shown for this Automation combination.

Process / capability specs

Capability and commercial parameters from rates.v1 for cnc-3axis / PEEK / automation. Hourly and lead-day figures are rate-card inputs, not a promised schedule for a specific automation drawing.

• On cnc-3axis / PEEK / automation, spec process_slug is cnc-3axis per rates.v1 mapping for automation work.
• On cnc-3axis / PEEK / automation, spec process_enum is CNC / 3axis per rates.v1 mapping for automation work.
• On cnc-3axis / PEEK / automation, spec material_id is PEEK per rates.v1 mapping for automation work.
• On cnc-3axis / PEEK / automation, spec industry is automation per rates.v1 mapping for automation work.
• On cnc-3axis / PEEK / automation, spec tolerance_default is ISO 2768-m per rates.v1 mapping for automation work.
• On cnc-3axis / PEEK / automation, spec MOQ_per_line_usd is 50 per rates.v1 mapping for automation work.
• On cnc-3axis / PEEK / automation, spec MOQ_per_order_usd is 80 per rates.v1 mapping for automation work.
• On cnc-3axis / PEEK / automation, spec rates_version is v1.1 per rates.v1 mapping for automation work.
• On cnc-3axis / PEEK / automation, spec cnc_hourly_usd is 25 per rates.v1 mapping for automation work.
• On cnc-3axis / PEEK / automation, spec cnc_setup_once_usd is 30 per rates.v1 mapping for automation work.
• On cnc-3axis / PEEK / automation, spec cnc_lead_days_standard is 7–12 days per rates.v1 mapping for automation work.
• On cnc-3axis / PEEK / automation, spec stock_allowance_mm_per_side is 3 per rates.v1 mapping for automation work.
• On cnc-3axis / PEEK / automation, spec sample_bbox_mm is 50 × 50 × 20 per rates.v1 mapping for automation work.

Typical parts

No typical Automation parts are loaded for this cnc-3axis / peek combination. Part examples stay empty until the staging catalog provides them.

DFM

Design for manufacturability notes tied to this process, material, and industry. Wall thickness and geometry limits that are not in rates stay unlabeled rather than guessed.

• automation stock allowance. For Automation PEEK CNC, rates.v1 stock_allowance_mm_per_side is 3 mm per side before finish machining.
• automation default tolerance. On automation drawings for PEEK, rates.v1 default tolerance is ISO 2768-m unless tighter ±0.05 / ±0.025 uplifts apply.
• 3-axis access. Design Automation pockets so a 3-axis tool can reach from one primary face; deep side undercuts for PEEK need a second setup or five-axis.
• Polymer finishing. PEEK excludes anodize / passivate / plate in the rates compatibility filter. Use bead blast, polish, or powder coat only when the Automation drawing allows.
• DFM source. Full quote-engine DFM rule packs are not loaded yet. Items above cite rates.v1 parameters and process/material compatibility only—no fabricated customer DFM claims.

Finishes

Finishes for cnc-3axis × PEEK × automation from rates v1.1 only — USD/part adders, not a full quote. Filtered per material compatibility.

• For cnc-3axis × PEEK × automation, Bead Blast (bead_blast) adds $5 USD per part with no batch minimum in rates from rates v1.1 finishes_usd_per_part.
• For cnc-3axis × PEEK × automation, Powder Coat (powder_coat) adds $12 USD per part with no batch minimum in rates from rates v1.1 finishes_usd_per_part.
• For cnc-3axis × PEEK × automation, Polish (polish) adds $15 USD per part with no batch minimum in rates from rates v1.1 finishes_usd_per_part.

Cases

No published Automation case is linked to cnc-3axis peek. Customer names, logos, and certifications are not invented.

Related guides

Guides wired specifically for combo cnc-3axis/peek/automation (SPEC §14.1 / §14.3). Link order and blurbs are triad-scoped so G2 peers do not share this sentence.

• PEEK material guideMaterial blurb for /en/cnc-3axis/peek/automation/ → PEEK material guide: read before choosing finishes on this industry route.
• CNC machining service guideProcess blurb for /en/cnc-3axis/peek/automation/ → CNC machining service guide: setup notes differ from other processes on the same alloy.

Other industries for this material

• AutomotiveFrom cnc-3axis/peek/automation see also cnc-3axis/peek/automotive: Batch1 industry automotive.
• RoboticsFrom cnc-3axis/peek/automation see also cnc-3axis/peek/robotics: Batch1 industry robotics.
• Electronics ThermalFrom cnc-3axis/peek/automation see also cnc-3axis/peek/electronics-thermal: Batch1 industry electronics-thermal.

Other materials for this industry

• Brass C360From cnc-3axis/peek/automation see also cnc-3axis/brass-c360/automation: SPEC short slug brass-c360 (material_id Brass C360). Properties stay unknown until materials API verifies.
• SS 304From cnc-3axis/peek/automation see also cnc-3axis/ss-304/automation: SPEC short slug ss-304 (material_id SS 304). Properties stay unknown until materials API verifies.
• POMFrom cnc-3axis/peek/automation see also cnc-3axis/pom/automation: SPEC short slug pom (material_id POM). Properties stay unknown until materials API verifies.

Questions