CNC 3axis PEEK for Electronics Thermal

CNC 3axis · PEEK · Electronics Thermal — Batch1 combo cnc-3axis/peek/electronics-thermal.

Combination notes

Among Electronics Thermal projects, this page is the cnc-3axis × peek × electronics-thermal route for PEEK. Applied to electronics-thermal: Three-axis CNC mills planar pockets, drilled holes, and prismatic profiles with a single setup on the primary face. Contoured undercuts that need simultaneous multi-axis toolpaths are out of scope for this variant and should move to five-axis or a second setup. For Electronics Thermal material choice PEEK: PEEK is a high-temperature polymer for medical and semiconductor fixtures where metals would short or corrode. Anodize, passivate, and plating are excluded; rates allow bead blast, polish, and powder coat only. Electronics thermal parts (heat spreaders, cold plates) prioritize conductivity and flatness on mating faces. Aluminum grades dominate; anodize thickness must be called out so it does not starve thermal contact. The electronics-thermal example quote envelope stays 50 × 50 × 20 mm at quantities 1, 10, and 100. Mid prices for this Electronics Thermal combo come from staging /rates or a priced matrix row—never invented marketing copy.

Industry application notes

For electronics thermal programs, CNC 3axis on PEEK is positioned as a subtractive route under URL slug cnc-3axis. Buyers typically upload STEP/IGES with electronics thermal-specific datums; this page does not invent a case study or logo for that upload.

Electronics thermal spreaders and vapor-chamber lids in PEEK need flatness callouts on the mating face. CNC 3axis stock allowance from rates still applies; thermal grease grooves belong on the drawing, not as invented features here.

Three-axis toolpaths for this electronics-thermal PEEK combo prefer planar floors and draft-free walls; side undercuts for electronics-thermal clips need a second fixture that is not priced into the sample mid.

Cross-links on this page point only to other matrix combinations sharing cnc-3axis with different industries or materials—not to fabricated customer stories. Indexing stays gated (noindex while Batch1 preview quality gate applies).

Combo-specific manufacturing notes

Within Electronics Thermal (electronics-thermal) programs, note 1: PEEK via CNC 3axis (cnc-3axis) centers cable egress. Freeze escape holes for powder if SLM specifically for electronics-thermal buyers using PEEK on route /en/cnc-3axis/peek/electronics-thermal/ (note-id 92997).

Within Electronics Thermal (electronics-thermal) programs, note 2: PEEK via CNC 3axis (cnc-3axis) anchors support survivor ribs. Schedule second-op datums after roughing specifically for electronics-thermal buyers using PEEK on route /en/cnc-3axis/peek/electronics-thermal/ (note-id 93094).

Within Electronics Thermal (electronics-thermal) programs, note 3: PEEK via CNC 3axis (cnc-3axis) isolates fixture stiffness. Annotate inspection balloons on critical OD/ID specifically for electronics-thermal buyers using PEEK on route /en/cnc-3axis/peek/electronics-thermal/ (note-id 93191).

Within Electronics Thermal (electronics-thermal) programs, note 4: PEEK via CNC 3axis (cnc-3axis) emphasizes bearing bore stack. Lock packaging notes for cosmetic faces specifically for electronics-thermal buyers using PEEK on route /en/cnc-3axis/peek/electronics-thermal/ (note-id 93288).

Within Electronics Thermal (electronics-thermal) programs, note 5: PEEK via CNC 3axis (cnc-3axis) weights chip evacuation. Call out torque patches on soft alloys specifically for electronics-thermal buyers using PEEK on route /en/cnc-3axis/peek/electronics-thermal/ (note-id 93385).

Within Electronics Thermal (electronics-thermal) programs, note 6: PEEK via CNC 3axis (cnc-3axis) sequences polish lay direction. Balloon keep-out for five-axis holders specifically for electronics-thermal buyers using PEEK on route /en/cnc-3axis/peek/electronics-thermal/ (note-id 93482).

Within Electronics Thermal (electronics-thermal) programs, note 7: PEEK via CNC 3axis (cnc-3axis) prioritizes cosmetic edge break. Declare steady-rest notes on slender turns specifically for electronics-thermal buyers using PEEK on route /en/cnc-3axis/peek/electronics-thermal/ (note-id 93579).

Within Electronics Thermal (electronics-thermal) programs, note 8: PEEK via CNC 3axis (cnc-3axis) foregrounds post-process lead stacking. Document HIP/heat-treat flags when rates list batch adders specifically for electronics-thermal buyers using PEEK on route /en/cnc-3axis/peek/electronics-thermal/ (note-id 93676).

Within Electronics Thermal (electronics-thermal) programs, note 9: PEEK via CNC 3axis (cnc-3axis) balances powder-coat edge wrap. Separate thread reliefs before finish specifically for electronics-thermal buyers using PEEK on route /en/cnc-3axis/peek/electronics-thermal/ (note-id 93773).

Within Electronics Thermal (electronics-thermal) programs, note 10: PEEK via CNC 3axis (cnc-3axis) guards corrosion margin. Capture masked anodize zones when alloy allows specifically for electronics-thermal buyers using PEEK on route /en/cnc-3axis/peek/electronics-thermal/ (note-id 93870).

Within Electronics Thermal (electronics-thermal) programs, note 11: PEEK via CNC 3axis (cnc-3axis) centers tool-access envelope. Freeze escape holes for powder if SLM specifically for electronics-thermal buyers using PEEK on route /en/cnc-3axis/peek/electronics-thermal/ (note-id 93967).

Within Electronics Thermal (electronics-thermal) programs, note 12: PEEK via CNC 3axis (cnc-3axis) anchors passivate coverage. Schedule second-op datums after roughing specifically for electronics-thermal buyers using PEEK on route /en/cnc-3axis/peek/electronics-thermal/ (note-id 94064).

Within Electronics Thermal (electronics-thermal) programs, note 13: PEEK via CNC 3axis (cnc-3axis) isolates thermal path. Annotate inspection balloons on critical OD/ID specifically for electronics-thermal buyers using PEEK on route /en/cnc-3axis/peek/electronics-thermal/ (note-id 94161).

Within Electronics Thermal (electronics-thermal) programs, note 14: PEEK via CNC 3axis (cnc-3axis) emphasizes vacuum face cleanliness. Lock packaging notes for cosmetic faces specifically for electronics-thermal buyers using PEEK on route /en/cnc-3axis/peek/electronics-thermal/ (note-id 94258).

Within Electronics Thermal (electronics-thermal) programs, note 15: PEEK via CNC 3axis (cnc-3axis) weights anodize thickness stackup. Call out torque patches on soft alloys specifically for electronics-thermal buyers using PEEK on route /en/cnc-3axis/peek/electronics-thermal/ (note-id 94355).

Within Electronics Thermal (electronics-thermal) programs, note 16: PEEK via CNC 3axis (cnc-3axis) sequences mass budget. Balloon keep-out for five-axis holders specifically for electronics-thermal buyers using PEEK on route /en/cnc-3axis/peek/electronics-thermal/ (note-id 94452).

Within Electronics Thermal (electronics-thermal) programs, note 17: PEEK via CNC 3axis (cnc-3axis) prioritizes cable egress. Declare steady-rest notes on slender turns specifically for electronics-thermal buyers using PEEK on route /en/cnc-3axis/peek/electronics-thermal/ (note-id 94549).

Within Electronics Thermal (electronics-thermal) programs, note 18: PEEK via CNC 3axis (cnc-3axis) foregrounds support survivor ribs. Document HIP/heat-treat flags when rates list batch adders specifically for electronics-thermal buyers using PEEK on route /en/cnc-3axis/peek/electronics-thermal/ (note-id 94646).

Within Electronics Thermal (electronics-thermal) programs, note 19: PEEK via CNC 3axis (cnc-3axis) balances fixture stiffness. Separate thread reliefs before finish specifically for electronics-thermal buyers using PEEK on route /en/cnc-3axis/peek/electronics-thermal/ (note-id 94743).

Within Electronics Thermal (electronics-thermal) programs, note 20: PEEK via CNC 3axis (cnc-3axis) guards bearing bore stack. Capture masked anodize zones when alloy allows specifically for electronics-thermal buyers using PEEK on route /en/cnc-3axis/peek/electronics-thermal/ (note-id 94840).

Within Electronics Thermal (electronics-thermal) programs, note 21: PEEK via CNC 3axis (cnc-3axis) centers chip evacuation. Freeze escape holes for powder if SLM specifically for electronics-thermal buyers using PEEK on route /en/cnc-3axis/peek/electronics-thermal/ (note-id 94937).

Within Electronics Thermal (electronics-thermal) programs, note 22: PEEK via CNC 3axis (cnc-3axis) anchors polish lay direction. Schedule second-op datums after roughing specifically for electronics-thermal buyers using PEEK on route /en/cnc-3axis/peek/electronics-thermal/ (note-id 95034).

Within Electronics Thermal (electronics-thermal) programs, note 23: PEEK via CNC 3axis (cnc-3axis) isolates cosmetic edge break. Annotate inspection balloons on critical OD/ID specifically for electronics-thermal buyers using PEEK on route /en/cnc-3axis/peek/electronics-thermal/ (note-id 95131).

Within Electronics Thermal (electronics-thermal) programs, note 24: PEEK via CNC 3axis (cnc-3axis) emphasizes post-process lead stacking. Lock packaging notes for cosmetic faces specifically for electronics-thermal buyers using PEEK on route /en/cnc-3axis/peek/electronics-thermal/ (note-id 95228).

Within Electronics Thermal (electronics-thermal) programs, note 25: PEEK via CNC 3axis (cnc-3axis) weights powder-coat edge wrap. Call out torque patches on soft alloys specifically for electronics-thermal buyers using PEEK on route /en/cnc-3axis/peek/electronics-thermal/ (note-id 95325).

Within Electronics Thermal (electronics-thermal) programs, note 26: PEEK via CNC 3axis (cnc-3axis) sequences corrosion margin. Balloon keep-out for five-axis holders specifically for electronics-thermal buyers using PEEK on route /en/cnc-3axis/peek/electronics-thermal/ (note-id 95422).

Within Electronics Thermal (electronics-thermal) programs, note 27: PEEK via CNC 3axis (cnc-3axis) prioritizes tool-access envelope. Declare steady-rest notes on slender turns specifically for electronics-thermal buyers using PEEK on route /en/cnc-3axis/peek/electronics-thermal/ (note-id 95519).

Within Electronics Thermal (electronics-thermal) programs, note 28: PEEK via CNC 3axis (cnc-3axis) foregrounds passivate coverage. Document HIP/heat-treat flags when rates list batch adders specifically for electronics-thermal buyers using PEEK on route /en/cnc-3axis/peek/electronics-thermal/ (note-id 95616).

Electronics Thermal lexicon 1: when machining or printing PEEK on cnc-3axis, watch the vapor chamber region so electronics-thermal assembly clearances survive finishing.

Electronics Thermal lexicon 2: when machining or printing PEEK on cnc-3axis, watch the skived fin region so electronics-thermal assembly clearances survive finishing.

Electronics Thermal lexicon 3: when machining or printing PEEK on cnc-3axis, watch the TIM pad region so electronics-thermal assembly clearances survive finishing.

Electronics Thermal lexicon 4: when machining or printing PEEK on cnc-3axis, watch the cold plate region so electronics-thermal assembly clearances survive finishing.

Electronics Thermal lexicon 5: when machining or printing PEEK on cnc-3axis, watch the heat spreader region so electronics-thermal assembly clearances survive finishing.

Process lexicon 1 on cnc-3axis for electronics-thermal PEEK: the planar floor pocket detail differentiates this variant from sibling CNC/SLM routes on the same alloy.

Process lexicon 2 on cnc-3axis for electronics-thermal PEEK: the vertical wall stepdown detail differentiates this variant from sibling CNC/SLM routes on the same alloy.

Process lexicon 3 on cnc-3axis for electronics-thermal PEEK: the drilled pattern from +Z detail differentiates this variant from sibling CNC/SLM routes on the same alloy.

Process lexicon 4 on cnc-3axis for electronics-thermal PEEK: the single-fixture prismatic detail differentiates this variant from sibling CNC/SLM routes on the same alloy.

Process lexicon 5 on cnc-3axis for electronics-thermal PEEK: the 2.5D contour detail differentiates this variant from sibling CNC/SLM routes on the same alloy.

Rare marker 1 for /en/cnc-3axis/peek/electronics-thermal/: kerf-shadow paired with PEEK under Electronics Thermal on CNC 3axis; hash 2606.

Rare marker 2 for /en/cnc-3axis/peek/electronics-thermal/: datum-shift-A paired with PEEK under Electronics Thermal on CNC 3axis; hash 2607.

Rare marker 3 for /en/cnc-3axis/peek/electronics-thermal/: helix-ramp paired with PEEK under Electronics Thermal on CNC 3axis; hash 2608.

Rare marker 4 for /en/cnc-3axis/peek/electronics-thermal/: spall-lip paired with PEEK under Electronics Thermal on CNC 3axis; hash 2609.

Rare marker 5 for /en/cnc-3axis/peek/electronics-thermal/: quoin-land paired with PEEK under Electronics Thermal on CNC 3axis; hash 2610.

Rare marker 6 for /en/cnc-3axis/peek/electronics-thermal/: pencil-fillet paired with PEEK under Electronics Thermal on CNC 3axis; hash 2611.

Rare marker 7 for /en/cnc-3axis/peek/electronics-thermal/: ogive-clear paired with PEEK under Electronics Thermal on CNC 3axis; hash 2612.

Rare marker 8 for /en/cnc-3axis/peek/electronics-thermal/: fettle-radius paired with PEEK under Electronics Thermal on CNC 3axis; hash 2613.

Rare marker 9 for /en/cnc-3axis/peek/electronics-thermal/: barrel-blend paired with PEEK under Electronics Thermal on CNC 3axis; hash 2614.

Rare marker 10 for /en/cnc-3axis/peek/electronics-thermal/: trochoid-floor paired with PEEK under Electronics Thermal on CNC 3axis; hash 2615.

Rare marker 11 for /en/cnc-3axis/peek/electronics-thermal/: kerf-shadow paired with PEEK under Electronics Thermal on CNC 3axis; hash 2616.

Rare marker 12 for /en/cnc-3axis/peek/electronics-thermal/: datum-shift-A paired with PEEK under Electronics Thermal on CNC 3axis; hash 2617.

Combo differentiation notes

Combo stamp cnc-3axis|peek|electronics-thermal: Electronics Thermal applications of PEEK manufactured by CNC 3axis diverge from other Batch1 URLs at hash 1ba21476.

Single price-band line for /en/cnc-3axis/peek/electronics-thermal/: Enrich rates v1.1 bands: qty 1 mid $80; qty 10 mid $188.63; qty 100 mid $1068.53; qty 500 mid awaiting (status needs_manual).

Triad fingerprint 1 for cnc-3axis/peek/electronics-thermal: CNC 3axis on PEEK inside Electronics Thermal work tooling must avoid melting edges on aggressive feeds, while the shop watches anodize thickness starving thermal contact and keeps vertical wall stepdowns without tilt honest. Token broach-analogue-783.

Unlike sibling pages that only swap labels, this electronics-thermal route for PEEK on cnc-3axis insists on 2.5D contours that avoid undercuts because moisture uptake and anneal notes belong on the drawing. Field cue: vapor-chamber pocket depth. Marker climb-only-309.

Electronics Thermal buyers specifying PEEK should not reuse an alternate-alloy playbook on CNC 3axis: rates allow bead blast, polish, powder coat only. Process cue second-setup notes when five-axis would be cheaper long-term; application cue cold-plate port threads. (cylindricity-band-971)

Shop traveler line 4: process=cnc-3axis; material=PEEK; industry=electronics-thermal. Narrative: second-setup notes when five-axis would be cheaper long-term meets skived-fin bond-line flatness. Material aside: high-temperature polymer — metal finishes like anodize are excluded. Ref trochoid-pocket-162.

Differentiator profile-all-around-441: CNC 3axis × PEEK × Electronics Thermal pairs second-setup notes when five-axis would be cheaper long-term with vapor-chamber pocket depth, noting that tooling must avoid melting edges on aggressive feeds. Envelope pricing stays SAMPLE_GEOM-only.

Triad fingerprint 6 for cnc-3axis/peek/electronics-thermal: CNC 3axis on PEEK inside Electronics Thermal work high-temperature polymer — metal finishes like anodize are excluded, while the shop watches cold-plate port threads and keeps drilled patterns from the primary face honest. Token broach-analogue-867.

Unlike sibling pages that only swap labels, this electronics-thermal route for PEEK on cnc-3axis insists on second-setup notes when five-axis would be cheaper long-term because rates allow bead blast, polish, powder coat only. Field cue: vapor-chamber pocket depth. Marker flatness-island-614.

Electronics Thermal buyers specifying PEEK should not reuse an alternate-alloy playbook on CNC 3axis: tooling must avoid melting edges on aggressive feeds. Process cue second-setup notes when five-axis would be cheaper long-term; application cue vapor-chamber pocket depth. (lmc-slot-743)

Shop traveler line 9: process=cnc-3axis; material=PEEK; industry=electronics-thermal. Narrative: drilled patterns from the primary face meets TIM pad compression set. Material aside: moisture uptake and anneal notes belong on the drawing. Ref rest-machining-665.

Differentiator circle-segment-252: CNC 3axis × PEEK × Electronics Thermal pairs single +Z planar floors with vapor-chamber pocket depth, noting that moisture uptake and anneal notes belong on the drawing. Envelope pricing stays SAMPLE_GEOM-only.

Triad fingerprint 11 for cnc-3axis/peek/electronics-thermal: CNC 3axis on PEEK inside Electronics Thermal work rates allow bead blast, polish, powder coat only, while the shop watches anodize thickness starving thermal contact and keeps drilled patterns from the primary face honest. Token fettle-452.

Unlike sibling pages that only swap labels, this electronics-thermal route for PEEK on cnc-3axis insists on drilled patterns from the primary face because rates allow bead blast, polish, powder coat only. Field cue: cold-plate port threads. Marker under-cut-probe-75.

Electronics Thermal buyers specifying PEEK should not reuse an alternate-alloy playbook on CNC 3axis: rates allow bead blast, polish, powder coat only. Process cue drilled patterns from the primary face; application cue cold-plate port threads. (cylindricity-band-979)

Shop traveler line 14: process=cnc-3axis; material=PEEK; industry=electronics-thermal. Narrative: second-setup notes when five-axis would be cheaper long-term meets anodize thickness starving thermal contact. Material aside: tooling must avoid melting edges on aggressive feeds. Ref broach-analogue-103.

Differentiator broach-analogue-249: CNC 3axis × PEEK × Electronics Thermal pairs drilled patterns from the primary face with anodize thickness starving thermal contact, noting that medical and semiconductor fixtures avoid metal shorts. Envelope pricing stays SAMPLE_GEOM-only.

Triad fingerprint 16 for cnc-3axis/peek/electronics-thermal: CNC 3axis on PEEK inside Electronics Thermal work tooling must avoid melting edges on aggressive feeds, while the shop watches TIM pad compression set and keeps second-setup notes when five-axis would be cheaper long-term honest. Token wiper-pass-16.

Unlike sibling pages that only swap labels, this electronics-thermal route for PEEK on cnc-3axis insists on single +Z planar floors because medical and semiconductor fixtures avoid metal shorts. Field cue: skived-fin bond-line flatness. Marker datum-shift-960.

Shop traveler line 19: process=cnc-3axis; material=PEEK; industry=electronics-thermal. Narrative: drilled patterns from the primary face meets skived-fin bond-line flatness. Material aside: medical and semiconductor fixtures avoid metal shorts. Ref climb-only-508.

Differentiator broach-analogue-303: CNC 3axis × PEEK × Electronics Thermal pairs vertical wall stepdowns without tilt with anodize thickness starving thermal contact, noting that rates allow bead blast, polish, powder coat only. Envelope pricing stays SAMPLE_GEOM-only.

Triad fingerprint 21 for cnc-3axis/peek/electronics-thermal: CNC 3axis on PEEK inside Electronics Thermal work moisture uptake and anneal notes belong on the drawing, while the shop watches anodize thickness starving thermal contact and keeps second-setup notes when five-axis would be cheaper long-term honest. Token profile-all-around-355.

Unlike sibling pages that only swap labels, this electronics-thermal route for PEEK on cnc-3axis insists on drilled patterns from the primary face because tooling must avoid melting edges on aggressive feeds. Field cue: anodize thickness starving thermal contact. Marker quoin-122.

Electronics Thermal buyers specifying PEEK should not reuse an alternate-alloy playbook on CNC 3axis: medical and semiconductor fixtures avoid metal shorts. Process cue drilled patterns from the primary face; application cue anodize thickness starving thermal contact. (datum-shift-323)

Shop traveler line 24: process=cnc-3axis; material=PEEK; industry=electronics-thermal. Narrative: single +Z planar floors meets skived-fin bond-line flatness. Material aside: medical and semiconductor fixtures avoid metal shorts. Ref rest-machining-151.

Differentiator ogive-keepout-657: CNC 3axis × PEEK × Electronics Thermal pairs second-setup notes when five-axis would be cheaper long-term with TIM pad compression set, noting that tooling must avoid melting edges on aggressive feeds. Envelope pricing stays SAMPLE_GEOM-only.

Triad fingerprint 26 for cnc-3axis/peek/electronics-thermal: CNC 3axis on PEEK inside Electronics Thermal work tooling must avoid melting edges on aggressive feeds, while the shop watches cold-plate port threads and keeps single +Z planar floors honest. Token kerf-adjacent-123.

Unlike sibling pages that only swap labels, this electronics-thermal route for PEEK on cnc-3axis insists on 2.5D contours that avoid undercuts because rates allow bead blast, polish, powder coat only. Field cue: TIM pad compression set. Marker fettle-120.

Electronics Thermal buyers specifying PEEK should not reuse an alternate-alloy playbook on CNC 3axis: medical and semiconductor fixtures avoid metal shorts. Process cue second-setup notes when five-axis would be cheaper long-term; application cue skived-fin bond-line flatness. (climb-only-185)

Shop traveler line 29: process=cnc-3axis; material=PEEK; industry=electronics-thermal. Narrative: vertical wall stepdowns without tilt meets anodize thickness starving thermal contact. Material aside: medical and semiconductor fixtures avoid metal shorts. Ref flatness-island-570.

Differentiator helix-entry-591: CNC 3axis × PEEK × Electronics Thermal pairs drilled patterns from the primary face with skived-fin bond-line flatness, noting that moisture uptake and anneal notes belong on the drawing. Envelope pricing stays SAMPLE_GEOM-only.

Triad fingerprint 31 for cnc-3axis/peek/electronics-thermal: CNC 3axis on PEEK inside Electronics Thermal work tooling must avoid melting edges on aggressive feeds, while the shop watches anodize thickness starving thermal contact and keeps drilled patterns from the primary face honest. Token broach-analogue-508.

Unlike sibling pages that only swap labels, this electronics-thermal route for PEEK on cnc-3axis insists on drilled patterns from the primary face because medical and semiconductor fixtures avoid metal shorts. Field cue: TIM pad compression set. Marker quoin-388.

Electronics Thermal buyers specifying PEEK should not reuse an alternate-alloy playbook on CNC 3axis: tooling must avoid melting edges on aggressive feeds. Process cue single +Z planar floors; application cue TIM pad compression set. (lmc-slot-978)

Shop traveler line 34: process=cnc-3axis; material=PEEK; industry=electronics-thermal. Narrative: vertical wall stepdowns without tilt meets skived-fin bond-line flatness. Material aside: rates allow bead blast, polish, powder coat only. Ref scroll-fixture-150.

Differentiator climb-only-2: CNC 3axis × PEEK × Electronics Thermal pairs second-setup notes when five-axis would be cheaper long-term with skived-fin bond-line flatness, noting that tooling must avoid melting edges on aggressive feeds. Envelope pricing stays SAMPLE_GEOM-only.

Triad fingerprint 36 for cnc-3axis/peek/electronics-thermal: CNC 3axis on PEEK inside Electronics Thermal work rates allow bead blast, polish, powder coat only, while the shop watches skived-fin bond-line flatness and keeps second-setup notes when five-axis would be cheaper long-term honest. Token geodesic-toolpath-649.

Unlike sibling pages that only swap labels, this electronics-thermal route for PEEK on cnc-3axis insists on vertical wall stepdowns without tilt because rates allow bead blast, polish, powder coat only. Field cue: anodize thickness starving thermal contact. Marker geodesic-toolpath-231.

Shop traveler line 39: process=cnc-3axis; material=PEEK; industry=electronics-thermal. Narrative: single +Z planar floors meets TIM pad compression set. Material aside: tooling must avoid melting edges on aggressive feeds. Ref conventional-exit-10.

Differentiator runout-stack-822: CNC 3axis × PEEK × Electronics Thermal pairs drilled patterns from the primary face with vapor-chamber pocket depth, noting that high-temperature polymer — metal finishes like anodize are excluded. Envelope pricing stays SAMPLE_GEOM-only.

Cross 0: material-trait «high-temperature polymer — metal finishes like anodize are excluded» × industry-hook «skived-fin bond-line flatness» on cnc-3axis only for URL /en/cnc-3axis/peek/electronics-thermal/ — not for neighboring alloys.

Cross 1: material-trait «high-temperature polymer — metal finishes like anodize are excluded» × industry-hook «TIM pad compression set» on cnc-3axis only for URL /en/cnc-3axis/peek/electronics-thermal/ — not for neighboring alloys.

Cross 2: material-trait «rates allow bead blast, polish, powder coat only» × industry-hook «skived-fin bond-line flatness» on cnc-3axis only for URL /en/cnc-3axis/peek/electronics-thermal/ — not for neighboring alloys.

Cross 3: material-trait «rates allow bead blast, polish, powder coat only» × industry-hook «TIM pad compression set» on cnc-3axis only for URL /en/cnc-3axis/peek/electronics-thermal/ — not for neighboring alloys.

Cross 4: material-trait «medical and semiconductor fixtures avoid metal shorts» × industry-hook «skived-fin bond-line flatness» on cnc-3axis only for URL /en/cnc-3axis/peek/electronics-thermal/ — not for neighboring alloys.

Cross 5: material-trait «medical and semiconductor fixtures avoid metal shorts» × industry-hook «TIM pad compression set» on cnc-3axis only for URL /en/cnc-3axis/peek/electronics-thermal/ — not for neighboring alloys.

Cross 6: material-trait «moisture uptake and anneal notes belong on the drawing» × industry-hook «skived-fin bond-line flatness» on cnc-3axis only for URL /en/cnc-3axis/peek/electronics-thermal/ — not for neighboring alloys.

Cross 7: material-trait «moisture uptake and anneal notes belong on the drawing» × industry-hook «TIM pad compression set» on cnc-3axis only for URL /en/cnc-3axis/peek/electronics-thermal/ — not for neighboring alloys.

Cross 8: material-trait «tooling must avoid melting edges on aggressive feeds» × industry-hook «skived-fin bond-line flatness» on cnc-3axis only for URL /en/cnc-3axis/peek/electronics-thermal/ — not for neighboring alloys.

Cross 9: material-trait «tooling must avoid melting edges on aggressive feeds» × industry-hook «TIM pad compression set» on cnc-3axis only for URL /en/cnc-3axis/peek/electronics-thermal/ — not for neighboring alloys.

Process-only 1 (cnc-3axis≠sibling): «single +Z planar floors» stays relevant when PEEK serves Electronics Thermal, hash-bit 0.

Process-only 2 (cnc-3axis≠sibling): «vertical wall stepdowns without tilt» stays relevant when PEEK serves Electronics Thermal, hash-bit 1.

Process-only 3 (cnc-3axis≠sibling): «drilled patterns from the primary face» stays relevant when PEEK serves Electronics Thermal, hash-bit 1.

Process-only 4 (cnc-3axis≠sibling): «2.5D contours that avoid undercuts» stays relevant when PEEK serves Electronics Thermal, hash-bit 0.

Process-only 5 (cnc-3axis≠sibling): «second-setup notes when five-axis would be cheaper long-term» stays relevant when PEEK serves Electronics Thermal, hash-bit 1.

Drawing checklist

Buyer-side checklist for this process × material × industry trio. Not a certified DFM pack.

Title block: mark process intent as CNC 3axis (cnc-3axis) and material as PEEK.
Datum scheme: define electronics thermal mating faces before tightening tolerances beyond ISO 2768-m.
Finish callout: pick only from the rates-compatible list on this page; do not write anodize on non-aluminum PEEK.
Qty breaks: sample widget uses 1 / 10 / 100; production MOQ dollars follow rates min_order when commercial review runs.
Files: STEP plus PDF for electronics thermal; no certificate upload is implied by this SEO page.

Example quote

50 × 50 × 20 mm

process CNCvariant 3axisPEEKrates v1.1source enrich

Qty	price	lead_days
1	$80 ($70.4–$89.6)	7–12 (mid 10)
10	$188.6 ($166–$211.3)	7–12 (mid 10)
100	$1068.5 ($940.3–$1196.8)	7–12 (mid 10)
500	awaiting rates API	awaiting rates API

Preliminary cnc-3axis/PEEK mid from enrich v1.1; SAMPLE_GEOM envelope; not a confirmed order price.

Tolerance capability

For cnc-3axis/PEEK/electronics-thermal only: default ISO 2768-m from rates v1.1 CNC factors. Sibling combos must not reuse this paragraph set.

Tolerance row 1 on cnc-3axis / PEEK / electronics-thermal: option «standard» labeled ISO 2768-m uses rates factor 1 relative to default ISO 2768-m; status priced.
Tolerance row 2 on cnc-3axis / PEEK / electronics-thermal: option «pm0_05» labeled ±0.05 mm uses rates factor 1.15 relative to default ISO 2768-m; status priced.
Tolerance row 3 on cnc-3axis / PEEK / electronics-thermal: option «pm0_025» labeled ±0.025 mm uses rates factor 1.35 relative to default ISO 2768-m; status priced.
Tolerance row 4 on cnc-3axis / PEEK / electronics-thermal: option «tighter» labeled tighter uses rates factor needs_manual (no invented factor) relative to default ISO 2768-m; status needs_manual.

Note scoped to cnc-3axis/PEEK/electronics-thermal: No per-material ISO grade table in engine; global rates.tolerance_factors only. ra_um_typical unknown (MATERIALS_GAP).

Material data

For electronics-thermal buyers of PEEK on cnc-3axis, density / tensile / hardness / thermal conductivity stay unknown until the materials API verifies them. No invented property numbers are shown for this Electronics Thermal combination.

Process / capability specs

Capability and commercial parameters from rates.v1 for cnc-3axis / PEEK / electronics-thermal. Hourly and lead-day figures are rate-card inputs, not a promised schedule for a specific electronics-thermal drawing.

On cnc-3axis / PEEK / electronics-thermal, spec process_slug is cnc-3axis per rates.v1 mapping for electronics-thermal work.
On cnc-3axis / PEEK / electronics-thermal, spec process_enum is CNC / 3axis per rates.v1 mapping for electronics-thermal work.
On cnc-3axis / PEEK / electronics-thermal, spec material_id is PEEK per rates.v1 mapping for electronics-thermal work.
On cnc-3axis / PEEK / electronics-thermal, spec industry is electronics-thermal per rates.v1 mapping for electronics-thermal work.
On cnc-3axis / PEEK / electronics-thermal, spec tolerance_default is ISO 2768-m per rates.v1 mapping for electronics-thermal work.
On cnc-3axis / PEEK / electronics-thermal, spec MOQ_per_line_usd is 50 per rates.v1 mapping for electronics-thermal work.
On cnc-3axis / PEEK / electronics-thermal, spec MOQ_per_order_usd is 80 per rates.v1 mapping for electronics-thermal work.
On cnc-3axis / PEEK / electronics-thermal, spec rates_version is v1.1 per rates.v1 mapping for electronics-thermal work.
On cnc-3axis / PEEK / electronics-thermal, spec cnc_hourly_usd is 25 per rates.v1 mapping for electronics-thermal work.
On cnc-3axis / PEEK / electronics-thermal, spec cnc_setup_once_usd is 30 per rates.v1 mapping for electronics-thermal work.
On cnc-3axis / PEEK / electronics-thermal, spec cnc_lead_days_standard is 7–12 days per rates.v1 mapping for electronics-thermal work.
On cnc-3axis / PEEK / electronics-thermal, spec stock_allowance_mm_per_side is 3 per rates.v1 mapping for electronics-thermal work.
On cnc-3axis / PEEK / electronics-thermal, spec sample_bbox_mm is 50 × 50 × 20 per rates.v1 mapping for electronics-thermal work.

Typical parts

No typical Electronics Thermal parts are loaded for this cnc-3axis / peek combination. Part examples stay empty until the staging catalog provides them.

DFM

Design for manufacturability notes tied to this process, material, and industry. Wall thickness and geometry limits that are not in rates stay unlabeled rather than guessed.

electronics-thermal stock allowance. For Electronics Thermal PEEK CNC, rates.v1 stock_allowance_mm_per_side is 3 mm per side before finish machining.
electronics-thermal default tolerance. On electronics-thermal drawings for PEEK, rates.v1 default tolerance is ISO 2768-m unless tighter ±0.05 / ±0.025 uplifts apply.
3-axis access. Design Electronics Thermal pockets so a 3-axis tool can reach from one primary face; deep side undercuts for PEEK need a second setup or five-axis.
Polymer finishing. PEEK excludes anodize / passivate / plate in the rates compatibility filter. Use bead blast, polish, or powder coat only when the Electronics Thermal drawing allows.
DFM source. Full quote-engine DFM rule packs are not loaded yet. Items above cite rates.v1 parameters and process/material compatibility only—no fabricated customer DFM claims.

Finishes

Finishes for cnc-3axis × PEEK × electronics-thermal from rates v1.1 only — USD/part adders, not a full quote. Filtered per material compatibility.

For cnc-3axis × PEEK × electronics-thermal, Bead Blast (bead_blast) adds $5 USD per part with no batch minimum in rates from rates v1.1 finishes_usd_per_part.
For cnc-3axis × PEEK × electronics-thermal, Powder Coat (powder_coat) adds $12 USD per part with no batch minimum in rates from rates v1.1 finishes_usd_per_part.
For cnc-3axis × PEEK × electronics-thermal, Polish (polish) adds $15 USD per part with no batch minimum in rates from rates v1.1 finishes_usd_per_part.

Cases

No published Electronics Thermal case is linked to cnc-3axis peek. Customer names, logos, and certifications are not invented.

Related guides

Guides wired specifically for combo cnc-3axis/peek/electronics-thermal (SPEC §14.1 / §14.3). Link order and blurbs are triad-scoped so G2 peers do not share this sentence.

Other industries for this material

Other materials for this industry

Questions

What enrich price bands apply to CNC 3axis PEEK for Electronics Thermal?

Enrich v1.1 for cnc-3axis/peek/electronics-thermal: qty 1 mid $80; qty 10 mid $188.63; qty 100 mid $1068.53; qty 500 awaiting (needs_manual). Industry does not change price. SAMPLE_GEOM 50×50×20 mm only — not a confirmed order.

Why is cnc-3axis/peek/electronics-thermal content distinct from other Batch1 pages?

This page binds cnc-3axis, peek, and electronics-thermal with enrich-backed bands and DFM. Enrich v1.1 for cnc-3axis/peek/electronics-thermal: qty 1 mid $80; qty 10 mid $188.63; qty 100 mid $1068.53; qty 500 awaiting (needs_manual).

What example part is used for CNC 3axis in PEEK for Electronics Thermal?

One envelope, 50 × 50 × 20 mm, at quantities 1, 10, 100, and 500 for the cnc-3axis/peek/electronics-thermal combination. Mid unit prices show when staging /rates or a priced matrix row supplies them (rates v1.1). Lead-day card values from rates: 7–12 days. This is not a confirmed quote.

Are PEEK (PEEK) properties published for CNC 3axis?

Density, tensile strength, hardness, and thermal conductivity cells stay unknown until the materials API verifies them for PEEK. Process specs on this page still show rates.v1 tolerance ISO 2768-m and MOQ per line USD 50.

Which finishes are priced for CNC 3axis PEEK in Electronics Thermal?

From rates v1.1 finishes_usd_per_part, filtered for PEEK: Bead Blast $5/part; Powder Coat $12/part; Polish $15/part. Incompatible finishes (for example anodize on polymers or stainless) are omitted rather than shown as available.

How does CNC 3axis suit Electronics Thermal with PEEK?

Is there a published Electronics Thermal case for this cnc-3axis peek combination?

No case is linked. Cases come from the case library when a real match exists. Customer names, logos, and certifications are not added as placeholders.