CNC 3axis PEEK for Robotics

Combination notes

Among Robotics projects, this page is the cnc-3axis × peek × robotics route for PEEK. Applied to robotics: Three-axis CNC mills planar pockets, drilled holes, and prismatic profiles with a single setup on the primary face. Contoured undercuts that need simultaneous multi-axis toolpaths are out of scope for this variant and should move to five-axis or a second setup. For Robotics material choice PEEK: PEEK is a high-temperature polymer for medical and semiconductor fixtures where metals would short or corrode. Anodize, passivate, and plating are excluded; rates allow bead blast, polish, and powder coat only. Robotics end-effectors and gearbox housings mix stiffness with cable clearances. Five-axis or turning helps concentric bearing bores; aluminum anodize improves wear on sliding covers when the material is aluminum. The robotics example quote envelope stays 50 × 50 × 20 mm at quantities 1, 10, and 100. Mid prices for this Robotics combo come from staging /rates or a priced matrix row—never invented marketing copy.

Industry application notes

For robotics programs, CNC 3axis on PEEK is positioned as a subtractive route under URL slug cnc-3axis. Buyers typically upload STEP/IGES with robotics-specific datums; this page does not invent a case study or logo for that upload.

Robotics wrist housings and reducer adapters in PEEK mix bearing bores with cable labyrinths. CNC 3axis helps when the robotics CAD keeps tool access honest; harmonic-drive interfaces must come from the customer model.

Three-axis toolpaths for this robotics PEEK combo prefer planar floors and draft-free walls; side undercuts for robotics clips need a second fixture that is not priced into the sample mid.

Cross-links on this page point only to other matrix combinations sharing cnc-3axis with different industries or materials—not to fabricated customer stories. Indexing stays gated (noindex while Batch1 preview quality gate applies).

Combo-specific manufacturing notes

Within Robotics (robotics) programs, note 1: PEEK via CNC 3axis (cnc-3axis) isolates tool-access envelope. Separate steady-rest notes on slender turns specifically for robotics buyers using PEEK on route /en/cnc-3axis/peek/robotics/ (note-id 31967).

Within Robotics (robotics) programs, note 2: PEEK via CNC 3axis (cnc-3axis) emphasizes passivate coverage. Capture HIP/heat-treat flags when rates list batch adders specifically for robotics buyers using PEEK on route /en/cnc-3axis/peek/robotics/ (note-id 32064).

Within Robotics (robotics) programs, note 3: PEEK via CNC 3axis (cnc-3axis) weights thermal path. Freeze thread reliefs before finish specifically for robotics buyers using PEEK on route /en/cnc-3axis/peek/robotics/ (note-id 32161).

Within Robotics (robotics) programs, note 4: PEEK via CNC 3axis (cnc-3axis) sequences vacuum face cleanliness. Schedule masked anodize zones when alloy allows specifically for robotics buyers using PEEK on route /en/cnc-3axis/peek/robotics/ (note-id 32258).

Within Robotics (robotics) programs, note 5: PEEK via CNC 3axis (cnc-3axis) prioritizes anodize thickness stackup. Annotate escape holes for powder if SLM specifically for robotics buyers using PEEK on route /en/cnc-3axis/peek/robotics/ (note-id 32355).

Within Robotics (robotics) programs, note 6: PEEK via CNC 3axis (cnc-3axis) foregrounds mass budget. Lock second-op datums after roughing specifically for robotics buyers using PEEK on route /en/cnc-3axis/peek/robotics/ (note-id 32452).

Within Robotics (robotics) programs, note 7: PEEK via CNC 3axis (cnc-3axis) balances cable egress. Call out inspection balloons on critical OD/ID specifically for robotics buyers using PEEK on route /en/cnc-3axis/peek/robotics/ (note-id 32549).

Within Robotics (robotics) programs, note 8: PEEK via CNC 3axis (cnc-3axis) guards support survivor ribs. Balloon packaging notes for cosmetic faces specifically for robotics buyers using PEEK on route /en/cnc-3axis/peek/robotics/ (note-id 32646).

Within Robotics (robotics) programs, note 9: PEEK via CNC 3axis (cnc-3axis) centers fixture stiffness. Declare torque patches on soft alloys specifically for robotics buyers using PEEK on route /en/cnc-3axis/peek/robotics/ (note-id 32743).

Within Robotics (robotics) programs, note 10: PEEK via CNC 3axis (cnc-3axis) anchors bearing bore stack. Document keep-out for five-axis holders specifically for robotics buyers using PEEK on route /en/cnc-3axis/peek/robotics/ (note-id 32840).

Within Robotics (robotics) programs, note 11: PEEK via CNC 3axis (cnc-3axis) isolates chip evacuation. Separate steady-rest notes on slender turns specifically for robotics buyers using PEEK on route /en/cnc-3axis/peek/robotics/ (note-id 32937).

Within Robotics (robotics) programs, note 12: PEEK via CNC 3axis (cnc-3axis) emphasizes polish lay direction. Capture HIP/heat-treat flags when rates list batch adders specifically for robotics buyers using PEEK on route /en/cnc-3axis/peek/robotics/ (note-id 33034).

Within Robotics (robotics) programs, note 13: PEEK via CNC 3axis (cnc-3axis) weights cosmetic edge break. Freeze thread reliefs before finish specifically for robotics buyers using PEEK on route /en/cnc-3axis/peek/robotics/ (note-id 33131).

Within Robotics (robotics) programs, note 14: PEEK via CNC 3axis (cnc-3axis) sequences post-process lead stacking. Schedule masked anodize zones when alloy allows specifically for robotics buyers using PEEK on route /en/cnc-3axis/peek/robotics/ (note-id 33228).

Within Robotics (robotics) programs, note 15: PEEK via CNC 3axis (cnc-3axis) prioritizes powder-coat edge wrap. Annotate escape holes for powder if SLM specifically for robotics buyers using PEEK on route /en/cnc-3axis/peek/robotics/ (note-id 33325).

Within Robotics (robotics) programs, note 16: PEEK via CNC 3axis (cnc-3axis) foregrounds corrosion margin. Lock second-op datums after roughing specifically for robotics buyers using PEEK on route /en/cnc-3axis/peek/robotics/ (note-id 33422).

Within Robotics (robotics) programs, note 17: PEEK via CNC 3axis (cnc-3axis) balances tool-access envelope. Call out inspection balloons on critical OD/ID specifically for robotics buyers using PEEK on route /en/cnc-3axis/peek/robotics/ (note-id 33519).

Within Robotics (robotics) programs, note 18: PEEK via CNC 3axis (cnc-3axis) guards passivate coverage. Balloon packaging notes for cosmetic faces specifically for robotics buyers using PEEK on route /en/cnc-3axis/peek/robotics/ (note-id 33616).

Within Robotics (robotics) programs, note 19: PEEK via CNC 3axis (cnc-3axis) centers thermal path. Declare torque patches on soft alloys specifically for robotics buyers using PEEK on route /en/cnc-3axis/peek/robotics/ (note-id 33713).

Within Robotics (robotics) programs, note 20: PEEK via CNC 3axis (cnc-3axis) anchors vacuum face cleanliness. Document keep-out for five-axis holders specifically for robotics buyers using PEEK on route /en/cnc-3axis/peek/robotics/ (note-id 33810).

Within Robotics (robotics) programs, note 21: PEEK via CNC 3axis (cnc-3axis) isolates anodize thickness stackup. Separate steady-rest notes on slender turns specifically for robotics buyers using PEEK on route /en/cnc-3axis/peek/robotics/ (note-id 33907).

Within Robotics (robotics) programs, note 22: PEEK via CNC 3axis (cnc-3axis) emphasizes mass budget. Capture HIP/heat-treat flags when rates list batch adders specifically for robotics buyers using PEEK on route /en/cnc-3axis/peek/robotics/ (note-id 34004).

Within Robotics (robotics) programs, note 23: PEEK via CNC 3axis (cnc-3axis) weights cable egress. Freeze thread reliefs before finish specifically for robotics buyers using PEEK on route /en/cnc-3axis/peek/robotics/ (note-id 34101).

Within Robotics (robotics) programs, note 24: PEEK via CNC 3axis (cnc-3axis) sequences support survivor ribs. Schedule masked anodize zones when alloy allows specifically for robotics buyers using PEEK on route /en/cnc-3axis/peek/robotics/ (note-id 34198).

Within Robotics (robotics) programs, note 25: PEEK via CNC 3axis (cnc-3axis) prioritizes fixture stiffness. Annotate escape holes for powder if SLM specifically for robotics buyers using PEEK on route /en/cnc-3axis/peek/robotics/ (note-id 34295).

Within Robotics (robotics) programs, note 26: PEEK via CNC 3axis (cnc-3axis) foregrounds bearing bore stack. Lock second-op datums after roughing specifically for robotics buyers using PEEK on route /en/cnc-3axis/peek/robotics/ (note-id 34392).

Within Robotics (robotics) programs, note 27: PEEK via CNC 3axis (cnc-3axis) balances chip evacuation. Call out inspection balloons on critical OD/ID specifically for robotics buyers using PEEK on route /en/cnc-3axis/peek/robotics/ (note-id 34489).

Within Robotics (robotics) programs, note 28: PEEK via CNC 3axis (cnc-3axis) guards polish lay direction. Balloon packaging notes for cosmetic faces specifically for robotics buyers using PEEK on route /en/cnc-3axis/peek/robotics/ (note-id 34586).

Robotics lexicon 1: when machining or printing PEEK on cnc-3axis, watch the wrist pitch region so robotics assembly clearances survive finishing.

Robotics lexicon 2: when machining or printing PEEK on cnc-3axis, watch the harmonic cup region so robotics assembly clearances survive finishing.

Robotics lexicon 3: when machining or printing PEEK on cnc-3axis, watch the gripper jaw region so robotics assembly clearances survive finishing.

Robotics lexicon 4: when machining or printing PEEK on cnc-3axis, watch the encoder mount region so robotics assembly clearances survive finishing.

Robotics lexicon 5: when machining or printing PEEK on cnc-3axis, watch the cable chain region so robotics assembly clearances survive finishing.

Process lexicon 1 on cnc-3axis for robotics PEEK: the planar floor pocket detail differentiates this variant from sibling CNC/SLM routes on the same alloy.

Process lexicon 2 on cnc-3axis for robotics PEEK: the vertical wall stepdown detail differentiates this variant from sibling CNC/SLM routes on the same alloy.

Process lexicon 3 on cnc-3axis for robotics PEEK: the drilled pattern from +Z detail differentiates this variant from sibling CNC/SLM routes on the same alloy.

Process lexicon 4 on cnc-3axis for robotics PEEK: the single-fixture prismatic detail differentiates this variant from sibling CNC/SLM routes on the same alloy.

Process lexicon 5 on cnc-3axis for robotics PEEK: the 2.5D contour detail differentiates this variant from sibling CNC/SLM routes on the same alloy.

Rare marker 1 for /en/cnc-3axis/peek/robotics/: barrel-blend paired with PEEK under Robotics on CNC 3axis; hash 6513.

Rare marker 2 for /en/cnc-3axis/peek/robotics/: trochoid-floor paired with PEEK under Robotics on CNC 3axis; hash 6514.

Rare marker 3 for /en/cnc-3axis/peek/robotics/: kerf-shadow paired with PEEK under Robotics on CNC 3axis; hash 6515.

Rare marker 4 for /en/cnc-3axis/peek/robotics/: datum-shift-A paired with PEEK under Robotics on CNC 3axis; hash 6516.

Rare marker 5 for /en/cnc-3axis/peek/robotics/: helix-ramp paired with PEEK under Robotics on CNC 3axis; hash 6517.

Rare marker 6 for /en/cnc-3axis/peek/robotics/: spall-lip paired with PEEK under Robotics on CNC 3axis; hash 6518.

Rare marker 7 for /en/cnc-3axis/peek/robotics/: quoin-land paired with PEEK under Robotics on CNC 3axis; hash 6519.

Rare marker 8 for /en/cnc-3axis/peek/robotics/: pencil-fillet paired with PEEK under Robotics on CNC 3axis; hash 6520.

Rare marker 9 for /en/cnc-3axis/peek/robotics/: ogive-clear paired with PEEK under Robotics on CNC 3axis; hash 6521.

Rare marker 10 for /en/cnc-3axis/peek/robotics/: fettle-radius paired with PEEK under Robotics on CNC 3axis; hash 6522.

Rare marker 11 for /en/cnc-3axis/peek/robotics/: barrel-blend paired with PEEK under Robotics on CNC 3axis; hash 6523.

Rare marker 12 for /en/cnc-3axis/peek/robotics/: trochoid-floor paired with PEEK under Robotics on CNC 3axis; hash 6524.

Combo differentiation notes

Combo stamp cnc-3axis|peek|robotics: Robotics applications of PEEK manufactured by CNC 3axis diverge from other Batch1 URLs at hash fffe6008.

Single price-band line for /en/cnc-3axis/peek/robotics/: Enrich rates v1.1 bands: qty 1 mid $80; qty 10 mid $188.63; qty 100 mid $1068.53; qty 500 mid awaiting (status needs_manual).

Triad fingerprint 1 for cnc-3axis/peek/robotics: CNC 3axis on PEEK inside Robotics work rates allow bead blast, polish, powder coat only, while the shop watches wrist-pitch casting alternatives versus billet and keeps drilled patterns from the primary face honest. Token lmc-slot-918.

Unlike sibling pages that only swap labels, this robotics route for PEEK on cnc-3axis insists on single +Z planar floors because rates allow bead blast, polish, powder coat only. Field cue: harmonic-drive cup concentricity. Marker runout-stack-701.

Robotics buyers specifying PEEK should not reuse an alternate-alloy playbook on CNC 3axis: moisture uptake and anneal notes belong on the drawing. Process cue vertical wall stepdowns without tilt; application cue encoder mount clocking. (dwell-peck-886)

Shop traveler line 4: process=cnc-3axis; material=PEEK; industry=robotics. Narrative: second-setup notes when five-axis would be cheaper long-term meets gripper-jaw wear pads. Material aside: rates allow bead blast, polish, powder coat only. Ref trochoid-pocket-891.

Differentiator wiper-pass-23: CNC 3axis × PEEK × Robotics pairs 2.5D contours that avoid undercuts with wrist-pitch casting alternatives versus billet, noting that medical and semiconductor fixtures avoid metal shorts. Envelope pricing stays SAMPLE_GEOM-only.

Triad fingerprint 6 for cnc-3axis/peek/robotics: CNC 3axis on PEEK inside Robotics work tooling must avoid melting edges on aggressive feeds, while the shop watches wrist-pitch casting alternatives versus billet and keeps second-setup notes when five-axis would be cheaper long-term honest. Token datum-shift-917.

Unlike sibling pages that only swap labels, this robotics route for PEEK on cnc-3axis insists on second-setup notes when five-axis would be cheaper long-term because rates allow bead blast, polish, powder coat only. Field cue: wrist-pitch casting alternatives versus billet. Marker climb-only-105.

Robotics buyers specifying PEEK should not reuse an alternate-alloy playbook on CNC 3axis: medical and semiconductor fixtures avoid metal shorts. Process cue drilled patterns from the primary face; application cue harmonic-drive cup concentricity. (datum-shift-747)

Shop traveler line 9: process=cnc-3axis; material=PEEK; industry=robotics. Narrative: 2.5D contours that avoid undercuts meets harmonic-drive cup concentricity. Material aside: medical and semiconductor fixtures avoid metal shorts. Ref geodesic-toolpath-987.

Differentiator geodesic-toolpath-476: CNC 3axis × PEEK × Robotics pairs second-setup notes when five-axis would be cheaper long-term with gripper-jaw wear pads, noting that rates allow bead blast, polish, powder coat only. Envelope pricing stays SAMPLE_GEOM-only.

Triad fingerprint 11 for cnc-3axis/peek/robotics: CNC 3axis on PEEK inside Robotics work tooling must avoid melting edges on aggressive feeds, while the shop watches cable-chain exit strain relief and keeps 2.5D contours that avoid undercuts honest. Token ramping-slot-718.

Unlike sibling pages that only swap labels, this robotics route for PEEK on cnc-3axis insists on drilled patterns from the primary face because medical and semiconductor fixtures avoid metal shorts. Field cue: harmonic-drive cup concentricity. Marker under-cut-probe-585.

Robotics buyers specifying PEEK should not reuse an alternate-alloy playbook on CNC 3axis: high-temperature polymer — metal finishes like anodize are excluded. Process cue drilled patterns from the primary face; application cue cable-chain exit strain relief. (barrel-cutter-816)

Shop traveler line 14: process=cnc-3axis; material=PEEK; industry=robotics. Narrative: 2.5D contours that avoid undercuts meets harmonic-drive cup concentricity. Material aside: rates allow bead blast, polish, powder coat only. Ref dwell-peck-562.

Differentiator fettle-725: CNC 3axis × PEEK × Robotics pairs 2.5D contours that avoid undercuts with gripper-jaw wear pads, noting that high-temperature polymer — metal finishes like anodize are excluded. Envelope pricing stays SAMPLE_GEOM-only.

Triad fingerprint 16 for cnc-3axis/peek/robotics: CNC 3axis on PEEK inside Robotics work high-temperature polymer — metal finishes like anodize are excluded, while the shop watches harmonic-drive cup concentricity and keeps 2.5D contours that avoid undercuts honest. Token dwell-peck-138.

Unlike sibling pages that only swap labels, this robotics route for PEEK on cnc-3axis insists on drilled patterns from the primary face because moisture uptake and anneal notes belong on the drawing. Field cue: harmonic-drive cup concentricity. Marker broach-analogue-562.

Robotics buyers specifying PEEK should not reuse an alternate-alloy playbook on CNC 3axis: high-temperature polymer — metal finishes like anodize are excluded. Process cue 2.5D contours that avoid undercuts; application cue encoder mount clocking. (flatness-island-371)

Shop traveler line 19: process=cnc-3axis; material=PEEK; industry=robotics. Narrative: second-setup notes when five-axis would be cheaper long-term meets cable-chain exit strain relief. Material aside: rates allow bead blast, polish, powder coat only. Ref broach-analogue-271.

Differentiator dwell-peck-916: CNC 3axis × PEEK × Robotics pairs vertical wall stepdowns without tilt with gripper-jaw wear pads, noting that high-temperature polymer — metal finishes like anodize are excluded. Envelope pricing stays SAMPLE_GEOM-only.

Triad fingerprint 21 for cnc-3axis/peek/robotics: CNC 3axis on PEEK inside Robotics work high-temperature polymer — metal finishes like anodize are excluded, while the shop watches encoder mount clocking and keeps drilled patterns from the primary face honest. Token geodesic-toolpath-408.

Unlike sibling pages that only swap labels, this robotics route for PEEK on cnc-3axis insists on single +Z planar floors because tooling must avoid melting edges on aggressive feeds. Field cue: harmonic-drive cup concentricity. Marker trochoid-pocket-576.

Robotics buyers specifying PEEK should not reuse an alternate-alloy playbook on CNC 3axis: high-temperature polymer — metal finishes like anodize are excluded. Process cue second-setup notes when five-axis would be cheaper long-term; application cue gripper-jaw wear pads. (geodesic-toolpath-725)

Shop traveler line 24: process=cnc-3axis; material=PEEK; industry=robotics. Narrative: single +Z planar floors meets harmonic-drive cup concentricity. Material aside: rates allow bead blast, polish, powder coat only. Ref under-cut-probe-136.

Differentiator rest-machining-322: CNC 3axis × PEEK × Robotics pairs second-setup notes when five-axis would be cheaper long-term with wrist-pitch casting alternatives versus billet, noting that tooling must avoid melting edges on aggressive feeds. Envelope pricing stays SAMPLE_GEOM-only.

Triad fingerprint 26 for cnc-3axis/peek/robotics: CNC 3axis on PEEK inside Robotics work rates allow bead blast, polish, powder coat only, while the shop watches encoder mount clocking and keeps drilled patterns from the primary face honest. Token geodesic-toolpath-665.

Unlike sibling pages that only swap labels, this robotics route for PEEK on cnc-3axis insists on vertical wall stepdowns without tilt because tooling must avoid melting edges on aggressive feeds. Field cue: gripper-jaw wear pads. Marker wiper-pass-642.

Robotics buyers specifying PEEK should not reuse an alternate-alloy playbook on CNC 3axis: medical and semiconductor fixtures avoid metal shorts. Process cue second-setup notes when five-axis would be cheaper long-term; application cue encoder mount clocking. (conventional-exit-700)

Shop traveler line 29: process=cnc-3axis; material=PEEK; industry=robotics. Narrative: drilled patterns from the primary face meets wrist-pitch casting alternatives versus billet. Material aside: medical and semiconductor fixtures avoid metal shorts. Ref mmc-pin-159.

Differentiator perpendicular-pad-288: CNC 3axis × PEEK × Robotics pairs vertical wall stepdowns without tilt with harmonic-drive cup concentricity, noting that tooling must avoid melting edges on aggressive feeds. Envelope pricing stays SAMPLE_GEOM-only.

Triad fingerprint 31 for cnc-3axis/peek/robotics: CNC 3axis on PEEK inside Robotics work moisture uptake and anneal notes belong on the drawing, while the shop watches harmonic-drive cup concentricity and keeps 2.5D contours that avoid undercuts honest. Token perpendicular-pad-182.

Unlike sibling pages that only swap labels, this robotics route for PEEK on cnc-3axis insists on single +Z planar floors because high-temperature polymer — metal finishes like anodize are excluded. Field cue: gripper-jaw wear pads. Marker ogive-keepout-283.

Robotics buyers specifying PEEK should not reuse an alternate-alloy playbook on CNC 3axis: moisture uptake and anneal notes belong on the drawing. Process cue drilled patterns from the primary face; application cue cable-chain exit strain relief. (wiper-pass-194)

Shop traveler line 34: process=cnc-3axis; material=PEEK; industry=robotics. Narrative: second-setup notes when five-axis would be cheaper long-term meets cable-chain exit strain relief. Material aside: rates allow bead blast, polish, powder coat only. Ref helix-entry-434.

Differentiator ogive-keepout-371: CNC 3axis × PEEK × Robotics pairs 2.5D contours that avoid undercuts with harmonic-drive cup concentricity, noting that moisture uptake and anneal notes belong on the drawing. Envelope pricing stays SAMPLE_GEOM-only.

Triad fingerprint 36 for cnc-3axis/peek/robotics: CNC 3axis on PEEK inside Robotics work rates allow bead blast, polish, powder coat only, while the shop watches harmonic-drive cup concentricity and keeps single +Z planar floors honest. Token trochoid-pocket-895.

Unlike sibling pages that only swap labels, this robotics route for PEEK on cnc-3axis insists on drilled patterns from the primary face because medical and semiconductor fixtures avoid metal shorts. Field cue: encoder mount clocking. Marker broach-analogue-48.

Robotics buyers specifying PEEK should not reuse an alternate-alloy playbook on CNC 3axis: tooling must avoid melting edges on aggressive feeds. Process cue second-setup notes when five-axis would be cheaper long-term; application cue wrist-pitch casting alternatives versus billet. (cylindricity-band-636)

Shop traveler line 39: process=cnc-3axis; material=PEEK; industry=robotics. Narrative: second-setup notes when five-axis would be cheaper long-term meets encoder mount clocking. Material aside: tooling must avoid melting edges on aggressive feeds. Ref quoin-384.

Differentiator profile-all-around-231: CNC 3axis × PEEK × Robotics pairs vertical wall stepdowns without tilt with wrist-pitch casting alternatives versus billet, noting that moisture uptake and anneal notes belong on the drawing. Envelope pricing stays SAMPLE_GEOM-only.

Cross 0: material-trait «high-temperature polymer — metal finishes like anodize are excluded» × industry-hook «harmonic-drive cup concentricity» on cnc-3axis only for URL /en/cnc-3axis/peek/robotics/ — not for neighboring alloys.

Cross 1: material-trait «high-temperature polymer — metal finishes like anodize are excluded» × industry-hook «gripper-jaw wear pads» on cnc-3axis only for URL /en/cnc-3axis/peek/robotics/ — not for neighboring alloys.

Cross 2: material-trait «rates allow bead blast, polish, powder coat only» × industry-hook «harmonic-drive cup concentricity» on cnc-3axis only for URL /en/cnc-3axis/peek/robotics/ — not for neighboring alloys.

Cross 3: material-trait «rates allow bead blast, polish, powder coat only» × industry-hook «gripper-jaw wear pads» on cnc-3axis only for URL /en/cnc-3axis/peek/robotics/ — not for neighboring alloys.

Cross 4: material-trait «medical and semiconductor fixtures avoid metal shorts» × industry-hook «harmonic-drive cup concentricity» on cnc-3axis only for URL /en/cnc-3axis/peek/robotics/ — not for neighboring alloys.

Cross 5: material-trait «medical and semiconductor fixtures avoid metal shorts» × industry-hook «gripper-jaw wear pads» on cnc-3axis only for URL /en/cnc-3axis/peek/robotics/ — not for neighboring alloys.

Cross 6: material-trait «moisture uptake and anneal notes belong on the drawing» × industry-hook «harmonic-drive cup concentricity» on cnc-3axis only for URL /en/cnc-3axis/peek/robotics/ — not for neighboring alloys.

Cross 7: material-trait «moisture uptake and anneal notes belong on the drawing» × industry-hook «gripper-jaw wear pads» on cnc-3axis only for URL /en/cnc-3axis/peek/robotics/ — not for neighboring alloys.

Cross 8: material-trait «tooling must avoid melting edges on aggressive feeds» × industry-hook «harmonic-drive cup concentricity» on cnc-3axis only for URL /en/cnc-3axis/peek/robotics/ — not for neighboring alloys.

Cross 9: material-trait «tooling must avoid melting edges on aggressive feeds» × industry-hook «gripper-jaw wear pads» on cnc-3axis only for URL /en/cnc-3axis/peek/robotics/ — not for neighboring alloys.

Process-only 1 (cnc-3axis≠sibling): «single +Z planar floors» stays relevant when PEEK serves Robotics, hash-bit 0.

Process-only 2 (cnc-3axis≠sibling): «vertical wall stepdowns without tilt» stays relevant when PEEK serves Robotics, hash-bit 0.

Process-only 3 (cnc-3axis≠sibling): «drilled patterns from the primary face» stays relevant when PEEK serves Robotics, hash-bit 0.

Process-only 4 (cnc-3axis≠sibling): «2.5D contours that avoid undercuts» stays relevant when PEEK serves Robotics, hash-bit 1.

Process-only 5 (cnc-3axis≠sibling): «second-setup notes when five-axis would be cheaper long-term» stays relevant when PEEK serves Robotics, hash-bit 0.

Drawing checklist

Buyer-side checklist for this process × material × industry trio. Not a certified DFM pack.

• Title block: mark process intent as CNC 3axis (cnc-3axis) and material as PEEK.
• Datum scheme: define robotics mating faces before tightening tolerances beyond ISO 2768-m.
• Finish callout: pick only from the rates-compatible list on this page; do not write anodize on non-aluminum PEEK.
• Qty breaks: sample widget uses 1 / 10 / 100; production MOQ dollars follow rates min_order when commercial review runs.
• Files: STEP plus PDF for robotics; no certificate upload is implied by this SEO page.

Tolerance capability

For cnc-3axis/PEEK/robotics only: default ISO 2768-m from rates v1.1 CNC factors. Sibling combos must not reuse this paragraph set.

• Tolerance row 1 on cnc-3axis / PEEK / robotics: option «standard» labeled ISO 2768-m uses rates factor 1 relative to default ISO 2768-m; status priced.
• Tolerance row 2 on cnc-3axis / PEEK / robotics: option «pm0_05» labeled ±0.05 mm uses rates factor 1.15 relative to default ISO 2768-m; status priced.
• Tolerance row 3 on cnc-3axis / PEEK / robotics: option «pm0_025» labeled ±0.025 mm uses rates factor 1.35 relative to default ISO 2768-m; status priced.
• Tolerance row 4 on cnc-3axis / PEEK / robotics: option «tighter» labeled tighter uses rates factor needs_manual (no invented factor) relative to default ISO 2768-m; status needs_manual.

Note scoped to cnc-3axis/PEEK/robotics: No per-material ISO grade table in engine; global rates.tolerance_factors only. ra_um_typical unknown (MATERIALS_GAP).

Material data

For robotics buyers of PEEK on cnc-3axis, density / tensile / hardness / thermal conductivity stay unknown until the materials API verifies them. No invented property numbers are shown for this Robotics combination.

Process / capability specs

Capability and commercial parameters from rates.v1 for cnc-3axis / PEEK / robotics. Hourly and lead-day figures are rate-card inputs, not a promised schedule for a specific robotics drawing.

• On cnc-3axis / PEEK / robotics, spec process_slug is cnc-3axis per rates.v1 mapping for robotics work.
• On cnc-3axis / PEEK / robotics, spec process_enum is CNC / 3axis per rates.v1 mapping for robotics work.
• On cnc-3axis / PEEK / robotics, spec material_id is PEEK per rates.v1 mapping for robotics work.
• On cnc-3axis / PEEK / robotics, spec industry is robotics per rates.v1 mapping for robotics work.
• On cnc-3axis / PEEK / robotics, spec tolerance_default is ISO 2768-m per rates.v1 mapping for robotics work.
• On cnc-3axis / PEEK / robotics, spec MOQ_per_line_usd is 50 per rates.v1 mapping for robotics work.
• On cnc-3axis / PEEK / robotics, spec MOQ_per_order_usd is 80 per rates.v1 mapping for robotics work.
• On cnc-3axis / PEEK / robotics, spec rates_version is v1.1 per rates.v1 mapping for robotics work.
• On cnc-3axis / PEEK / robotics, spec cnc_hourly_usd is 25 per rates.v1 mapping for robotics work.
• On cnc-3axis / PEEK / robotics, spec cnc_setup_once_usd is 30 per rates.v1 mapping for robotics work.
• On cnc-3axis / PEEK / robotics, spec cnc_lead_days_standard is 7–12 days per rates.v1 mapping for robotics work.
• On cnc-3axis / PEEK / robotics, spec stock_allowance_mm_per_side is 3 per rates.v1 mapping for robotics work.
• On cnc-3axis / PEEK / robotics, spec sample_bbox_mm is 50 × 50 × 20 per rates.v1 mapping for robotics work.

Typical parts

No typical Robotics parts are loaded for this cnc-3axis / peek combination. Part examples stay empty until the staging catalog provides them.

DFM

Design for manufacturability notes tied to this process, material, and industry. Wall thickness and geometry limits that are not in rates stay unlabeled rather than guessed.

• robotics stock allowance. For Robotics PEEK CNC, rates.v1 stock_allowance_mm_per_side is 3 mm per side before finish machining.
• robotics default tolerance. On robotics drawings for PEEK, rates.v1 default tolerance is ISO 2768-m unless tighter ±0.05 / ±0.025 uplifts apply.
• 3-axis access. Design Robotics pockets so a 3-axis tool can reach from one primary face; deep side undercuts for PEEK need a second setup or five-axis.
• Polymer finishing. PEEK excludes anodize / passivate / plate in the rates compatibility filter. Use bead blast, polish, or powder coat only when the Robotics drawing allows.
• DFM source. Full quote-engine DFM rule packs are not loaded yet. Items above cite rates.v1 parameters and process/material compatibility only—no fabricated customer DFM claims.

Finishes

Finishes for cnc-3axis × PEEK × robotics from rates v1.1 only — USD/part adders, not a full quote. Filtered per material compatibility.

• For cnc-3axis × PEEK × robotics, Bead Blast (bead_blast) adds $5 USD per part with no batch minimum in rates from rates v1.1 finishes_usd_per_part.
• For cnc-3axis × PEEK × robotics, Powder Coat (powder_coat) adds $12 USD per part with no batch minimum in rates from rates v1.1 finishes_usd_per_part.
• For cnc-3axis × PEEK × robotics, Polish (polish) adds $15 USD per part with no batch minimum in rates from rates v1.1 finishes_usd_per_part.

Cases

No published Robotics case is linked to cnc-3axis peek. Customer names, logos, and certifications are not invented.

Related guides

Guides wired specifically for combo cnc-3axis/peek/robotics (SPEC §14.1 / §14.3). Link order and blurbs are triad-scoped so G2 peers do not share this sentence.

• PEEK material guideMaterial blurb for /en/cnc-3axis/peek/robotics/ → PEEK material guide: read before choosing finishes on this industry route.
• CNC machining service guideProcess blurb for /en/cnc-3axis/peek/robotics/ → CNC machining service guide: setup notes differ from other processes on the same alloy.

Other industries for this material

• SemiconductorFrom cnc-3axis/peek/robotics see also cnc-3axis/peek/semiconductor: Batch1 industry semiconductor.
• AutomationFrom cnc-3axis/peek/robotics see also cnc-3axis/peek/automation: Batch1 industry automation.
• DroneFrom cnc-3axis/peek/robotics see also cnc-3axis/peek/drone: Batch1 industry drone.

Other materials for this industry

• Brass C360From cnc-3axis/peek/robotics see also cnc-3axis/brass-c360/robotics: SPEC short slug brass-c360 (material_id Brass C360). Properties stay unknown until materials API verifies.
• SS 316From cnc-3axis/peek/robotics see also cnc-3axis/ss-316/robotics: SPEC short slug ss-316 (material_id SS 316). Properties stay unknown until materials API verifies.
• Al 6061-T6From cnc-3axis/peek/robotics see also cnc-3axis/al-6061/robotics: SPEC short slug al-6061 (material_id Al 6061-T6). Properties stay unknown until materials API verifies.

Questions