CNC 3axis POM for Automation

Combination notes

Among Automation projects, this page is the cnc-3axis × pom × automation route for POM. Applied to automation: Three-axis CNC mills planar pockets, drilled holes, and prismatic profiles with a single setup on the primary face. Contoured undercuts that need simultaneous multi-axis toolpaths are out of scope for this variant and should move to five-axis or a second setup. For Automation material choice POM: POM (acetal) machines to tight bearing fits and low friction slides. Metal finishes such as anodize or passivate are incompatible; rates list bead blast, polish, and powder coat for polymers. Automation frames, locators, and wear pads need durable edges and predictable lead times. Mild steel or aluminum with powder coat or anodize covers most plant environments without inventing certifications. The automation example quote envelope stays 50 × 50 × 20 mm at quantities 1, 10, and 100. Mid prices for this Automation combo come from staging /rates or a priced matrix row—never invented marketing copy.

Industry application notes

For automation programs, CNC 3axis on POM is positioned as a subtractive route under URL slug cnc-3axis. Buyers typically upload STEP/IGES with automation-specific datums; this page does not invent a case study or logo for that upload.

Automation nest plates and wear strips in POM see cyclic abrasion. CNC 3axis with powder coat or anodize (when compatible) covers plant humidity without inventing IP ratings.

Three-axis toolpaths for this automation POM combo prefer planar floors and draft-free walls; side undercuts for automation clips need a second fixture that is not priced into the sample mid.

Cross-links on this page point only to other matrix combinations sharing cnc-3axis with different industries or materials—not to fabricated customer stories. Indexing stays gated (noindex while Batch1 preview quality gate applies).

Combo-specific manufacturing notes

Within Automation (automation) programs, note 1: POM via CNC 3axis (cnc-3axis) foregrounds polish lay direction. Lock second-op datums after roughing specifically for automation buyers using POM on route /en/cnc-3axis/pom/automation/ (note-id 63842).

Within Automation (automation) programs, note 2: POM via CNC 3axis (cnc-3axis) balances cosmetic edge break. Call out inspection balloons on critical OD/ID specifically for automation buyers using POM on route /en/cnc-3axis/pom/automation/ (note-id 63939).

Within Automation (automation) programs, note 3: POM via CNC 3axis (cnc-3axis) guards post-process lead stacking. Balloon packaging notes for cosmetic faces specifically for automation buyers using POM on route /en/cnc-3axis/pom/automation/ (note-id 64036).

Within Automation (automation) programs, note 4: POM via CNC 3axis (cnc-3axis) centers powder-coat edge wrap. Declare torque patches on soft alloys specifically for automation buyers using POM on route /en/cnc-3axis/pom/automation/ (note-id 64133).

Within Automation (automation) programs, note 5: POM via CNC 3axis (cnc-3axis) anchors corrosion margin. Document keep-out for five-axis holders specifically for automation buyers using POM on route /en/cnc-3axis/pom/automation/ (note-id 64230).

Within Automation (automation) programs, note 6: POM via CNC 3axis (cnc-3axis) isolates tool-access envelope. Separate steady-rest notes on slender turns specifically for automation buyers using POM on route /en/cnc-3axis/pom/automation/ (note-id 64327).

Within Automation (automation) programs, note 7: POM via CNC 3axis (cnc-3axis) emphasizes passivate coverage. Capture HIP/heat-treat flags when rates list batch adders specifically for automation buyers using POM on route /en/cnc-3axis/pom/automation/ (note-id 64424).

Within Automation (automation) programs, note 8: POM via CNC 3axis (cnc-3axis) weights thermal path. Freeze thread reliefs before finish specifically for automation buyers using POM on route /en/cnc-3axis/pom/automation/ (note-id 64521).

Within Automation (automation) programs, note 9: POM via CNC 3axis (cnc-3axis) sequences vacuum face cleanliness. Schedule masked anodize zones when alloy allows specifically for automation buyers using POM on route /en/cnc-3axis/pom/automation/ (note-id 64618).

Within Automation (automation) programs, note 10: POM via CNC 3axis (cnc-3axis) prioritizes anodize thickness stackup. Annotate escape holes for powder if SLM specifically for automation buyers using POM on route /en/cnc-3axis/pom/automation/ (note-id 64715).

Within Automation (automation) programs, note 11: POM via CNC 3axis (cnc-3axis) foregrounds mass budget. Lock second-op datums after roughing specifically for automation buyers using POM on route /en/cnc-3axis/pom/automation/ (note-id 64812).

Within Automation (automation) programs, note 12: POM via CNC 3axis (cnc-3axis) balances cable egress. Call out inspection balloons on critical OD/ID specifically for automation buyers using POM on route /en/cnc-3axis/pom/automation/ (note-id 64909).

Within Automation (automation) programs, note 13: POM via CNC 3axis (cnc-3axis) guards support survivor ribs. Balloon packaging notes for cosmetic faces specifically for automation buyers using POM on route /en/cnc-3axis/pom/automation/ (note-id 65006).

Within Automation (automation) programs, note 14: POM via CNC 3axis (cnc-3axis) centers fixture stiffness. Declare torque patches on soft alloys specifically for automation buyers using POM on route /en/cnc-3axis/pom/automation/ (note-id 65103).

Within Automation (automation) programs, note 15: POM via CNC 3axis (cnc-3axis) anchors bearing bore stack. Document keep-out for five-axis holders specifically for automation buyers using POM on route /en/cnc-3axis/pom/automation/ (note-id 65200).

Within Automation (automation) programs, note 16: POM via CNC 3axis (cnc-3axis) isolates chip evacuation. Separate steady-rest notes on slender turns specifically for automation buyers using POM on route /en/cnc-3axis/pom/automation/ (note-id 65297).

Within Automation (automation) programs, note 17: POM via CNC 3axis (cnc-3axis) emphasizes polish lay direction. Capture HIP/heat-treat flags when rates list batch adders specifically for automation buyers using POM on route /en/cnc-3axis/pom/automation/ (note-id 65394).

Within Automation (automation) programs, note 18: POM via CNC 3axis (cnc-3axis) weights cosmetic edge break. Freeze thread reliefs before finish specifically for automation buyers using POM on route /en/cnc-3axis/pom/automation/ (note-id 65491).

Within Automation (automation) programs, note 19: POM via CNC 3axis (cnc-3axis) sequences post-process lead stacking. Schedule masked anodize zones when alloy allows specifically for automation buyers using POM on route /en/cnc-3axis/pom/automation/ (note-id 65588).

Within Automation (automation) programs, note 20: POM via CNC 3axis (cnc-3axis) prioritizes powder-coat edge wrap. Annotate escape holes for powder if SLM specifically for automation buyers using POM on route /en/cnc-3axis/pom/automation/ (note-id 65685).

Within Automation (automation) programs, note 21: POM via CNC 3axis (cnc-3axis) foregrounds corrosion margin. Lock second-op datums after roughing specifically for automation buyers using POM on route /en/cnc-3axis/pom/automation/ (note-id 65782).

Within Automation (automation) programs, note 22: POM via CNC 3axis (cnc-3axis) balances tool-access envelope. Call out inspection balloons on critical OD/ID specifically for automation buyers using POM on route /en/cnc-3axis/pom/automation/ (note-id 65879).

Within Automation (automation) programs, note 23: POM via CNC 3axis (cnc-3axis) guards passivate coverage. Balloon packaging notes for cosmetic faces specifically for automation buyers using POM on route /en/cnc-3axis/pom/automation/ (note-id 65976).

Within Automation (automation) programs, note 24: POM via CNC 3axis (cnc-3axis) centers thermal path. Declare torque patches on soft alloys specifically for automation buyers using POM on route /en/cnc-3axis/pom/automation/ (note-id 66073).

Within Automation (automation) programs, note 25: POM via CNC 3axis (cnc-3axis) anchors vacuum face cleanliness. Document keep-out for five-axis holders specifically for automation buyers using POM on route /en/cnc-3axis/pom/automation/ (note-id 66170).

Within Automation (automation) programs, note 26: POM via CNC 3axis (cnc-3axis) isolates anodize thickness stackup. Separate steady-rest notes on slender turns specifically for automation buyers using POM on route /en/cnc-3axis/pom/automation/ (note-id 66267).

Within Automation (automation) programs, note 27: POM via CNC 3axis (cnc-3axis) emphasizes mass budget. Capture HIP/heat-treat flags when rates list batch adders specifically for automation buyers using POM on route /en/cnc-3axis/pom/automation/ (note-id 66364).

Within Automation (automation) programs, note 28: POM via CNC 3axis (cnc-3axis) weights cable egress. Freeze thread reliefs before finish specifically for automation buyers using POM on route /en/cnc-3axis/pom/automation/ (note-id 66461).

Automation lexicon 1: when machining or printing POM on cnc-3axis, watch the nest pocket region so automation assembly clearances survive finishing.

Automation lexicon 2: when machining or printing POM on cnc-3axis, watch the wear strip region so automation assembly clearances survive finishing.

Automation lexicon 3: when machining or printing POM on cnc-3axis, watch the locator pin region so automation assembly clearances survive finishing.

Automation lexicon 4: when machining or printing POM on cnc-3axis, watch the shuttle plate region so automation assembly clearances survive finishing.

Automation lexicon 5: when machining or printing POM on cnc-3axis, watch the endstop block region so automation assembly clearances survive finishing.

Process lexicon 1 on cnc-3axis for automation POM: the planar floor pocket detail differentiates this variant from sibling CNC/SLM routes on the same alloy.

Process lexicon 2 on cnc-3axis for automation POM: the vertical wall stepdown detail differentiates this variant from sibling CNC/SLM routes on the same alloy.

Process lexicon 3 on cnc-3axis for automation POM: the drilled pattern from +Z detail differentiates this variant from sibling CNC/SLM routes on the same alloy.

Process lexicon 4 on cnc-3axis for automation POM: the single-fixture prismatic detail differentiates this variant from sibling CNC/SLM routes on the same alloy.

Process lexicon 5 on cnc-3axis for automation POM: the 2.5D contour detail differentiates this variant from sibling CNC/SLM routes on the same alloy.

Rare marker 1 for /en/cnc-3axis/pom/automation/: spall-lip paired with POM under Automation on CNC 3axis; hash 6480.

Rare marker 2 for /en/cnc-3axis/pom/automation/: quoin-land paired with POM under Automation on CNC 3axis; hash 6481.

Rare marker 3 for /en/cnc-3axis/pom/automation/: pencil-fillet paired with POM under Automation on CNC 3axis; hash 6482.

Rare marker 4 for /en/cnc-3axis/pom/automation/: ogive-clear paired with POM under Automation on CNC 3axis; hash 6483.

Rare marker 5 for /en/cnc-3axis/pom/automation/: fettle-radius paired with POM under Automation on CNC 3axis; hash 6484.

Rare marker 6 for /en/cnc-3axis/pom/automation/: barrel-blend paired with POM under Automation on CNC 3axis; hash 6485.

Rare marker 7 for /en/cnc-3axis/pom/automation/: trochoid-floor paired with POM under Automation on CNC 3axis; hash 6486.

Rare marker 8 for /en/cnc-3axis/pom/automation/: kerf-shadow paired with POM under Automation on CNC 3axis; hash 6487.

Rare marker 9 for /en/cnc-3axis/pom/automation/: datum-shift-A paired with POM under Automation on CNC 3axis; hash 6488.

Rare marker 10 for /en/cnc-3axis/pom/automation/: helix-ramp paired with POM under Automation on CNC 3axis; hash 6489.

Rare marker 11 for /en/cnc-3axis/pom/automation/: spall-lip paired with POM under Automation on CNC 3axis; hash 6490.

Rare marker 12 for /en/cnc-3axis/pom/automation/: quoin-land paired with POM under Automation on CNC 3axis; hash 6491.

Combo differentiation notes

Combo stamp cnc-3axis|pom|automation: Automation applications of POM manufactured by CNC 3axis diverge from other Batch1 URLs at hash 3b69dd8f.

Single price-band line for /en/cnc-3axis/pom/automation/: Enrich rates v1.1 bands: qty 1 mid $80; qty 10 mid $80; qty 100 mid $191.56; qty 500 mid $873.79.

Triad fingerprint 1 for cnc-3axis/pom/automation: CNC 3axis on POM inside Automation work dimensional stability after machining beats many nylons, while the shop watches endstop block energy absorbers and keeps second-setup notes when five-axis would be cheaper long-term honest. Token trochoid-pocket-157.

Unlike sibling pages that only swap labels, this automation route for POM on cnc-3axis insists on drilled patterns from the primary face because metal anodize/passivate incompatible per rates finish rules. Field cue: shuttle-plate edge breaks. Marker cylindricity-band-477.

Automation buyers specifying POM should not reuse an alternate-alloy playbook on CNC 3axis: press-fit bosses need freeze notes unique to POM. Process cue drilled patterns from the primary face; application cue shuttle-plate edge breaks. (kerf-adjacent-384)

Shop traveler line 4: process=cnc-3axis; material=POM; industry=automation. Narrative: second-setup notes when five-axis would be cheaper long-term meets plant-floor powder coat durability. Material aside: dimensional stability after machining beats many nylons. Ref wiper-pass-652.

Differentiator pencil-cleanup-928: CNC 3axis × POM × Automation pairs 2.5D contours that avoid undercuts with nest-pocket wear strips, noting that dimensional stability after machining beats many nylons. Envelope pricing stays SAMPLE_GEOM-only.

Triad fingerprint 6 for cnc-3axis/pom/automation: CNC 3axis on POM inside Automation work acetal slides and bearing fits like low friction, while the shop watches shuttle-plate edge breaks and keeps single +Z planar floors honest. Token datum-shift-989.

Unlike sibling pages that only swap labels, this automation route for POM on cnc-3axis insists on vertical wall stepdowns without tilt because press-fit bosses need freeze notes unique to POM. Field cue: shuttle-plate edge breaks. Marker broach-analogue-860.

Automation buyers specifying POM should not reuse an alternate-alloy playbook on CNC 3axis: avoid chlorinated cleaners that attack acetal. Process cue 2.5D contours that avoid undercuts; application cue nest-pocket wear strips. (climb-only-594)

Shop traveler line 9: process=cnc-3axis; material=POM; industry=automation. Narrative: single +Z planar floors meets nest-pocket wear strips. Material aside: metal anodize/passivate incompatible per rates finish rules. Ref wiper-pass-650.

Differentiator trochoid-pocket-207: CNC 3axis × POM × Automation pairs 2.5D contours that avoid undercuts with shuttle-plate edge breaks, noting that acetal slides and bearing fits like low friction. Envelope pricing stays SAMPLE_GEOM-only.

Triad fingerprint 11 for cnc-3axis/pom/automation: CNC 3axis on POM inside Automation work acetal slides and bearing fits like low friction, while the shop watches endstop block energy absorbers and keeps vertical wall stepdowns without tilt honest. Token pencil-cleanup-160.

Unlike sibling pages that only swap labels, this automation route for POM on cnc-3axis insists on 2.5D contours that avoid undercuts because acetal slides and bearing fits like low friction. Field cue: locator-pin bushing fits. Marker spall-watch-699.

Automation buyers specifying POM should not reuse an alternate-alloy playbook on CNC 3axis: metal anodize/passivate incompatible per rates finish rules. Process cue 2.5D contours that avoid undercuts; application cue endstop block energy absorbers. (conventional-exit-487)

Shop traveler line 14: process=cnc-3axis; material=POM; industry=automation. Narrative: drilled patterns from the primary face meets plant-floor powder coat durability. Material aside: dimensional stability after machining beats many nylons. Ref spall-watch-447.

Differentiator quoin-682: CNC 3axis × POM × Automation pairs second-setup notes when five-axis would be cheaper long-term with endstop block energy absorbers, noting that acetal slides and bearing fits like low friction. Envelope pricing stays SAMPLE_GEOM-only.

Triad fingerprint 16 for cnc-3axis/pom/automation: CNC 3axis on POM inside Automation work acetal slides and bearing fits like low friction, while the shop watches nest-pocket wear strips and keeps drilled patterns from the primary face honest. Token broach-analogue-215.

Unlike sibling pages that only swap labels, this automation route for POM on cnc-3axis insists on vertical wall stepdowns without tilt because dimensional stability after machining beats many nylons. Field cue: nest-pocket wear strips. Marker climb-only-71.

Automation buyers specifying POM should not reuse an alternate-alloy playbook on CNC 3axis: press-fit bosses need freeze notes unique to POM. Process cue drilled patterns from the primary face; application cue locator-pin bushing fits. (climb-only-16)

Shop traveler line 19: process=cnc-3axis; material=POM; industry=automation. Narrative: drilled patterns from the primary face meets plant-floor powder coat durability. Material aside: press-fit bosses need freeze notes unique to POM. Ref broach-analogue-410.

Differentiator rest-machining-843: CNC 3axis × POM × Automation pairs drilled patterns from the primary face with shuttle-plate edge breaks, noting that avoid chlorinated cleaners that attack acetal. Envelope pricing stays SAMPLE_GEOM-only.

Triad fingerprint 21 for cnc-3axis/pom/automation: CNC 3axis on POM inside Automation work acetal slides and bearing fits like low friction, while the shop watches nest-pocket wear strips and keeps second-setup notes when five-axis would be cheaper long-term honest. Token ramping-slot-187.

Unlike sibling pages that only swap labels, this automation route for POM on cnc-3axis insists on drilled patterns from the primary face because avoid chlorinated cleaners that attack acetal. Field cue: shuttle-plate edge breaks. Marker rest-machining-117.

Automation buyers specifying POM should not reuse an alternate-alloy playbook on CNC 3axis: dimensional stability after machining beats many nylons. Process cue 2.5D contours that avoid undercuts; application cue endstop block energy absorbers. (under-cut-probe-33)

Shop traveler line 24: process=cnc-3axis; material=POM; industry=automation. Narrative: drilled patterns from the primary face meets endstop block energy absorbers. Material aside: avoid chlorinated cleaners that attack acetal. Ref conventional-exit-180.

Differentiator profile-all-around-124: CNC 3axis × POM × Automation pairs vertical wall stepdowns without tilt with endstop block energy absorbers, noting that avoid chlorinated cleaners that attack acetal. Envelope pricing stays SAMPLE_GEOM-only.

Triad fingerprint 26 for cnc-3axis/pom/automation: CNC 3axis on POM inside Automation work dimensional stability after machining beats many nylons, while the shop watches plant-floor powder coat durability and keeps drilled patterns from the primary face honest. Token rest-machining-323.

Unlike sibling pages that only swap labels, this automation route for POM on cnc-3axis insists on 2.5D contours that avoid undercuts because metal anodize/passivate incompatible per rates finish rules. Field cue: shuttle-plate edge breaks. Marker flatness-island-692.

Automation buyers specifying POM should not reuse an alternate-alloy playbook on CNC 3axis: metal anodize/passivate incompatible per rates finish rules. Process cue drilled patterns from the primary face; application cue endstop block energy absorbers. (quoin-217)

Shop traveler line 29: process=cnc-3axis; material=POM; industry=automation. Narrative: second-setup notes when five-axis would be cheaper long-term meets shuttle-plate edge breaks. Material aside: dimensional stability after machining beats many nylons. Ref dwell-peck-151.

Differentiator mmc-pin-81: CNC 3axis × POM × Automation pairs 2.5D contours that avoid undercuts with plant-floor powder coat durability, noting that dimensional stability after machining beats many nylons. Envelope pricing stays SAMPLE_GEOM-only.

Triad fingerprint 31 for cnc-3axis/pom/automation: CNC 3axis on POM inside Automation work press-fit bosses need freeze notes unique to POM, while the shop watches plant-floor powder coat durability and keeps single +Z planar floors honest. Token fretting-edge-817.

Unlike sibling pages that only swap labels, this automation route for POM on cnc-3axis insists on 2.5D contours that avoid undercuts because acetal slides and bearing fits like low friction. Field cue: endstop block energy absorbers. Marker rest-machining-75.

Automation buyers specifying POM should not reuse an alternate-alloy playbook on CNC 3axis: press-fit bosses need freeze notes unique to POM. Process cue 2.5D contours that avoid undercuts; application cue nest-pocket wear strips. (conventional-exit-352)

Shop traveler line 34: process=cnc-3axis; material=POM; industry=automation. Narrative: drilled patterns from the primary face meets nest-pocket wear strips. Material aside: acetal slides and bearing fits like low friction. Ref kerf-adjacent-328.

Differentiator geodesic-toolpath-912: CNC 3axis × POM × Automation pairs drilled patterns from the primary face with plant-floor powder coat durability, noting that metal anodize/passivate incompatible per rates finish rules. Envelope pricing stays SAMPLE_GEOM-only.

Triad fingerprint 36 for cnc-3axis/pom/automation: CNC 3axis on POM inside Automation work press-fit bosses need freeze notes unique to POM, while the shop watches shuttle-plate edge breaks and keeps vertical wall stepdowns without tilt honest. Token barrel-cutter-157.

Unlike sibling pages that only swap labels, this automation route for POM on cnc-3axis insists on vertical wall stepdowns without tilt because press-fit bosses need freeze notes unique to POM. Field cue: nest-pocket wear strips. Marker profile-all-around-876.

Automation buyers specifying POM should not reuse an alternate-alloy playbook on CNC 3axis: metal anodize/passivate incompatible per rates finish rules. Process cue drilled patterns from the primary face; application cue locator-pin bushing fits. (helix-entry-898)

Shop traveler line 39: process=cnc-3axis; material=POM; industry=automation. Narrative: single +Z planar floors meets plant-floor powder coat durability. Material aside: avoid chlorinated cleaners that attack acetal. Ref wiper-pass-11.

Differentiator under-cut-probe-302: CNC 3axis × POM × Automation pairs drilled patterns from the primary face with endstop block energy absorbers, noting that avoid chlorinated cleaners that attack acetal. Envelope pricing stays SAMPLE_GEOM-only.

Cross 0: material-trait «acetal slides and bearing fits like low friction» × industry-hook «nest-pocket wear strips» on cnc-3axis only for URL /en/cnc-3axis/pom/automation/ — not for neighboring alloys.

Cross 1: material-trait «acetal slides and bearing fits like low friction» × industry-hook «locator-pin bushing fits» on cnc-3axis only for URL /en/cnc-3axis/pom/automation/ — not for neighboring alloys.

Cross 2: material-trait «metal anodize/passivate incompatible per rates finish rules» × industry-hook «nest-pocket wear strips» on cnc-3axis only for URL /en/cnc-3axis/pom/automation/ — not for neighboring alloys.

Cross 3: material-trait «metal anodize/passivate incompatible per rates finish rules» × industry-hook «locator-pin bushing fits» on cnc-3axis only for URL /en/cnc-3axis/pom/automation/ — not for neighboring alloys.

Cross 4: material-trait «dimensional stability after machining beats many nylons» × industry-hook «nest-pocket wear strips» on cnc-3axis only for URL /en/cnc-3axis/pom/automation/ — not for neighboring alloys.

Cross 5: material-trait «dimensional stability after machining beats many nylons» × industry-hook «locator-pin bushing fits» on cnc-3axis only for URL /en/cnc-3axis/pom/automation/ — not for neighboring alloys.

Cross 6: material-trait «avoid chlorinated cleaners that attack acetal» × industry-hook «nest-pocket wear strips» on cnc-3axis only for URL /en/cnc-3axis/pom/automation/ — not for neighboring alloys.

Cross 7: material-trait «avoid chlorinated cleaners that attack acetal» × industry-hook «locator-pin bushing fits» on cnc-3axis only for URL /en/cnc-3axis/pom/automation/ — not for neighboring alloys.

Cross 8: material-trait «press-fit bosses need freeze notes unique to POM» × industry-hook «nest-pocket wear strips» on cnc-3axis only for URL /en/cnc-3axis/pom/automation/ — not for neighboring alloys.

Cross 9: material-trait «press-fit bosses need freeze notes unique to POM» × industry-hook «locator-pin bushing fits» on cnc-3axis only for URL /en/cnc-3axis/pom/automation/ — not for neighboring alloys.

Process-only 1 (cnc-3axis≠sibling): «single +Z planar floors» stays relevant when POM serves Automation, hash-bit 1.

Process-only 2 (cnc-3axis≠sibling): «vertical wall stepdowns without tilt» stays relevant when POM serves Automation, hash-bit 1.

Process-only 3 (cnc-3axis≠sibling): «drilled patterns from the primary face» stays relevant when POM serves Automation, hash-bit 1.

Process-only 4 (cnc-3axis≠sibling): «2.5D contours that avoid undercuts» stays relevant when POM serves Automation, hash-bit 1.

Process-only 5 (cnc-3axis≠sibling): «second-setup notes when five-axis would be cheaper long-term» stays relevant when POM serves Automation, hash-bit 0.

Drawing checklist

Buyer-side checklist for this process × material × industry trio. Not a certified DFM pack.

• Title block: mark process intent as CNC 3axis (cnc-3axis) and material as POM.
• Datum scheme: define automation mating faces before tightening tolerances beyond ISO 2768-m.
• Finish callout: pick only from the rates-compatible list on this page; do not write anodize on non-aluminum POM.
• Qty breaks: sample widget uses 1 / 10 / 100; production MOQ dollars follow rates min_order when commercial review runs.
• Files: STEP plus PDF for automation; no certificate upload is implied by this SEO page.

Tolerance capability

For cnc-3axis/POM/automation only: default ISO 2768-m from rates v1.1 CNC factors. Sibling combos must not reuse this paragraph set.

• Tolerance row 1 on cnc-3axis / POM / automation: option «standard» labeled ISO 2768-m uses rates factor 1 relative to default ISO 2768-m; status priced.
• Tolerance row 2 on cnc-3axis / POM / automation: option «pm0_05» labeled ±0.05 mm uses rates factor 1.15 relative to default ISO 2768-m; status priced.
• Tolerance row 3 on cnc-3axis / POM / automation: option «pm0_025» labeled ±0.025 mm uses rates factor 1.35 relative to default ISO 2768-m; status priced.
• Tolerance row 4 on cnc-3axis / POM / automation: option «tighter» labeled tighter uses rates factor needs_manual (no invented factor) relative to default ISO 2768-m; status needs_manual.

Note scoped to cnc-3axis/POM/automation: No per-material ISO grade table in engine; global rates.tolerance_factors only. ra_um_typical unknown (MATERIALS_GAP).

Material data

For automation buyers of POM on cnc-3axis, density / tensile / hardness / thermal conductivity stay unknown until the materials API verifies them. No invented property numbers are shown for this Automation combination.

Process / capability specs

Capability and commercial parameters from rates.v1 for cnc-3axis / POM / automation. Hourly and lead-day figures are rate-card inputs, not a promised schedule for a specific automation drawing.

• On cnc-3axis / POM / automation, spec process_slug is cnc-3axis per rates.v1 mapping for automation work.
• On cnc-3axis / POM / automation, spec process_enum is CNC / 3axis per rates.v1 mapping for automation work.
• On cnc-3axis / POM / automation, spec material_id is POM per rates.v1 mapping for automation work.
• On cnc-3axis / POM / automation, spec industry is automation per rates.v1 mapping for automation work.
• On cnc-3axis / POM / automation, spec tolerance_default is ISO 2768-m per rates.v1 mapping for automation work.
• On cnc-3axis / POM / automation, spec MOQ_per_line_usd is 50 per rates.v1 mapping for automation work.
• On cnc-3axis / POM / automation, spec MOQ_per_order_usd is 80 per rates.v1 mapping for automation work.
• On cnc-3axis / POM / automation, spec rates_version is v1.1 per rates.v1 mapping for automation work.
• On cnc-3axis / POM / automation, spec cnc_hourly_usd is 25 per rates.v1 mapping for automation work.
• On cnc-3axis / POM / automation, spec cnc_setup_once_usd is 30 per rates.v1 mapping for automation work.
• On cnc-3axis / POM / automation, spec cnc_lead_days_standard is 7–12 days per rates.v1 mapping for automation work.
• On cnc-3axis / POM / automation, spec stock_allowance_mm_per_side is 3 per rates.v1 mapping for automation work.
• On cnc-3axis / POM / automation, spec sample_bbox_mm is 50 × 50 × 20 per rates.v1 mapping for automation work.

Typical parts

No typical Automation parts are loaded for this cnc-3axis / pom combination. Part examples stay empty until the staging catalog provides them.

DFM

Design for manufacturability notes tied to this process, material, and industry. Wall thickness and geometry limits that are not in rates stay unlabeled rather than guessed.

• automation stock allowance. For Automation POM CNC, rates.v1 stock_allowance_mm_per_side is 3 mm per side before finish machining.
• automation default tolerance. On automation drawings for POM, rates.v1 default tolerance is ISO 2768-m unless tighter ±0.05 / ±0.025 uplifts apply.
• 3-axis access. Design Automation pockets so a 3-axis tool can reach from one primary face; deep side undercuts for POM need a second setup or five-axis.
• Polymer finishing. POM excludes anodize / passivate / plate in the rates compatibility filter. Use bead blast, polish, or powder coat only when the Automation drawing allows.
• DFM source. Full quote-engine DFM rule packs are not loaded yet. Items above cite rates.v1 parameters and process/material compatibility only—no fabricated customer DFM claims.

Finishes

Finishes for cnc-3axis × POM × automation from rates v1.1 only — USD/part adders, not a full quote. Filtered per material compatibility.

• For cnc-3axis × POM × automation, Bead Blast (bead_blast) adds $5 USD per part with no batch minimum in rates from rates v1.1 finishes_usd_per_part.
• For cnc-3axis × POM × automation, Powder Coat (powder_coat) adds $12 USD per part with no batch minimum in rates from rates v1.1 finishes_usd_per_part.
• For cnc-3axis × POM × automation, Polish (polish) adds $15 USD per part with no batch minimum in rates from rates v1.1 finishes_usd_per_part.

Cases

No published Automation case is linked to cnc-3axis pom. Customer names, logos, and certifications are not invented.

Related guides

Guides wired specifically for combo cnc-3axis/pom/automation (SPEC §14.1 / §14.3). Link order and blurbs are triad-scoped so G2 peers do not share this sentence.

• POM / Delrin material guideMaterial blurb for /en/cnc-3axis/pom/automation/ → POM / Delrin material guide: read before choosing finishes on this industry route.
• CNC machining service guideProcess blurb for /en/cnc-3axis/pom/automation/ → CNC machining service guide: setup notes differ from other processes on the same alloy.

Other industries for this material

• RoboticsFrom cnc-3axis/pom/automation see also cnc-3axis/pom/robotics: Batch1 industry robotics.
• SemiconductorFrom cnc-3axis/pom/automation see also cnc-3axis/pom/semiconductor: Batch1 industry semiconductor.
• DroneFrom cnc-3axis/pom/automation see also cnc-3axis/pom/drone: Batch1 industry drone.

Other materials for this industry

• Al 7075-T6From cnc-3axis/pom/automation see also cnc-3axis/al-7075/automation: SPEC short slug al-7075 (material_id Al 7075-T6). Properties stay unknown until materials API verifies.
• Al 6061-T6From cnc-3axis/pom/automation see also cnc-3axis/al-6061/automation: SPEC short slug al-6061 (material_id Al 6061-T6). Properties stay unknown until materials API verifies.
• PEEKFrom cnc-3axis/pom/automation see also cnc-3axis/peek/automation: SPEC short slug peek (material_id PEEK). Properties stay unknown until materials API verifies.

Questions