CNC 3axis POM for Drone

Combination notes

Among Drone projects, this page is the cnc-3axis × pom × drone route for POM. Applied to drone: Three-axis CNC mills planar pockets, drilled holes, and prismatic profiles with a single setup on the primary face. Contoured undercuts that need simultaneous multi-axis toolpaths are out of scope for this variant and should move to five-axis or a second setup. For Drone material choice POM: POM (acetal) machines to tight bearing fits and low friction slides. Metal finishes such as anodize or passivate are incompatible; rates list bead blast, polish, and powder coat for polymers. Drone programs care about mass, stiffness, and vibration at motor mounts and arm junctions. Keep wall thickness honest for the chosen process, and prefer finishes that add little mass (bead blast / thin anodize on aluminum). The drone example quote envelope stays 50 × 50 × 20 mm at quantities 1, 10, and 100. Mid prices for this Drone combo come from staging /rates or a priced matrix row—never invented marketing copy.

Industry application notes

For drone programs, CNC 3axis on POM is positioned as a subtractive route under URL slug cnc-3axis. Buyers typically upload STEP/IGES with drone-specific datums; this page does not invent a case study or logo for that upload.

Drone airframes and payload trays in POM often need pocketed lightening and hard-point inserts. CNC 3axis keeps mass predictable on the 50×50×20 mm quote envelope while real arms scale longer; call fastener patterns and CFRP interface pads on the drawing rather than assuming them here.

Three-axis toolpaths for this drone POM combo prefer planar floors and draft-free walls; side undercuts for drone clips need a second fixture that is not priced into the sample mid.

Cross-links on this page point only to other matrix combinations sharing cnc-3axis with different industries or materials—not to fabricated customer stories. Indexing stays gated (noindex while Batch1 preview quality gate applies).

Combo-specific manufacturing notes

Within Drone (drone) programs, note 1: POM via CNC 3axis (cnc-3axis) isolates thermal path. Separate steady-rest notes on slender turns specifically for drone buyers using POM on route /en/cnc-3axis/pom/drone/ (note-id 98041).

Within Drone (drone) programs, note 2: POM via CNC 3axis (cnc-3axis) emphasizes vacuum face cleanliness. Capture HIP/heat-treat flags when rates list batch adders specifically for drone buyers using POM on route /en/cnc-3axis/pom/drone/ (note-id 98138).

Within Drone (drone) programs, note 3: POM via CNC 3axis (cnc-3axis) weights anodize thickness stackup. Freeze thread reliefs before finish specifically for drone buyers using POM on route /en/cnc-3axis/pom/drone/ (note-id 98235).

Within Drone (drone) programs, note 4: POM via CNC 3axis (cnc-3axis) sequences mass budget. Schedule masked anodize zones when alloy allows specifically for drone buyers using POM on route /en/cnc-3axis/pom/drone/ (note-id 98332).

Within Drone (drone) programs, note 5: POM via CNC 3axis (cnc-3axis) prioritizes cable egress. Annotate escape holes for powder if SLM specifically for drone buyers using POM on route /en/cnc-3axis/pom/drone/ (note-id 98429).

Within Drone (drone) programs, note 6: POM via CNC 3axis (cnc-3axis) foregrounds support survivor ribs. Lock second-op datums after roughing specifically for drone buyers using POM on route /en/cnc-3axis/pom/drone/ (note-id 98526).

Within Drone (drone) programs, note 7: POM via CNC 3axis (cnc-3axis) balances fixture stiffness. Call out inspection balloons on critical OD/ID specifically for drone buyers using POM on route /en/cnc-3axis/pom/drone/ (note-id 98623).

Within Drone (drone) programs, note 8: POM via CNC 3axis (cnc-3axis) guards bearing bore stack. Balloon packaging notes for cosmetic faces specifically for drone buyers using POM on route /en/cnc-3axis/pom/drone/ (note-id 98720).

Within Drone (drone) programs, note 9: POM via CNC 3axis (cnc-3axis) centers chip evacuation. Declare torque patches on soft alloys specifically for drone buyers using POM on route /en/cnc-3axis/pom/drone/ (note-id 98817).

Within Drone (drone) programs, note 10: POM via CNC 3axis (cnc-3axis) anchors polish lay direction. Document keep-out for five-axis holders specifically for drone buyers using POM on route /en/cnc-3axis/pom/drone/ (note-id 98914).

Within Drone (drone) programs, note 11: POM via CNC 3axis (cnc-3axis) isolates cosmetic edge break. Separate steady-rest notes on slender turns specifically for drone buyers using POM on route /en/cnc-3axis/pom/drone/ (note-id 99011).

Within Drone (drone) programs, note 12: POM via CNC 3axis (cnc-3axis) emphasizes post-process lead stacking. Capture HIP/heat-treat flags when rates list batch adders specifically for drone buyers using POM on route /en/cnc-3axis/pom/drone/ (note-id 99108).

Within Drone (drone) programs, note 13: POM via CNC 3axis (cnc-3axis) weights powder-coat edge wrap. Freeze thread reliefs before finish specifically for drone buyers using POM on route /en/cnc-3axis/pom/drone/ (note-id 99205).

Within Drone (drone) programs, note 14: POM via CNC 3axis (cnc-3axis) sequences corrosion margin. Schedule masked anodize zones when alloy allows specifically for drone buyers using POM on route /en/cnc-3axis/pom/drone/ (note-id 99302).

Within Drone (drone) programs, note 15: POM via CNC 3axis (cnc-3axis) prioritizes tool-access envelope. Annotate escape holes for powder if SLM specifically for drone buyers using POM on route /en/cnc-3axis/pom/drone/ (note-id 99399).

Within Drone (drone) programs, note 16: POM via CNC 3axis (cnc-3axis) foregrounds passivate coverage. Lock second-op datums after roughing specifically for drone buyers using POM on route /en/cnc-3axis/pom/drone/ (note-id 99496).

Within Drone (drone) programs, note 17: POM via CNC 3axis (cnc-3axis) balances thermal path. Call out inspection balloons on critical OD/ID specifically for drone buyers using POM on route /en/cnc-3axis/pom/drone/ (note-id 99593).

Within Drone (drone) programs, note 18: POM via CNC 3axis (cnc-3axis) guards vacuum face cleanliness. Balloon packaging notes for cosmetic faces specifically for drone buyers using POM on route /en/cnc-3axis/pom/drone/ (note-id 99690).

Within Drone (drone) programs, note 19: POM via CNC 3axis (cnc-3axis) centers anodize thickness stackup. Declare torque patches on soft alloys specifically for drone buyers using POM on route /en/cnc-3axis/pom/drone/ (note-id 99787).

Within Drone (drone) programs, note 20: POM via CNC 3axis (cnc-3axis) anchors mass budget. Document keep-out for five-axis holders specifically for drone buyers using POM on route /en/cnc-3axis/pom/drone/ (note-id 99884).

Within Drone (drone) programs, note 21: POM via CNC 3axis (cnc-3axis) isolates cable egress. Separate steady-rest notes on slender turns specifically for drone buyers using POM on route /en/cnc-3axis/pom/drone/ (note-id 99981).

Within Drone (drone) programs, note 22: POM via CNC 3axis (cnc-3axis) emphasizes support survivor ribs. Capture HIP/heat-treat flags when rates list batch adders specifically for drone buyers using POM on route /en/cnc-3axis/pom/drone/ (note-id 75).

Within Drone (drone) programs, note 23: POM via CNC 3axis (cnc-3axis) weights fixture stiffness. Freeze thread reliefs before finish specifically for drone buyers using POM on route /en/cnc-3axis/pom/drone/ (note-id 172).

Within Drone (drone) programs, note 24: POM via CNC 3axis (cnc-3axis) sequences bearing bore stack. Schedule masked anodize zones when alloy allows specifically for drone buyers using POM on route /en/cnc-3axis/pom/drone/ (note-id 269).

Within Drone (drone) programs, note 25: POM via CNC 3axis (cnc-3axis) prioritizes chip evacuation. Annotate escape holes for powder if SLM specifically for drone buyers using POM on route /en/cnc-3axis/pom/drone/ (note-id 366).

Within Drone (drone) programs, note 26: POM via CNC 3axis (cnc-3axis) foregrounds polish lay direction. Lock second-op datums after roughing specifically for drone buyers using POM on route /en/cnc-3axis/pom/drone/ (note-id 463).

Within Drone (drone) programs, note 27: POM via CNC 3axis (cnc-3axis) balances cosmetic edge break. Call out inspection balloons on critical OD/ID specifically for drone buyers using POM on route /en/cnc-3axis/pom/drone/ (note-id 560).

Within Drone (drone) programs, note 28: POM via CNC 3axis (cnc-3axis) guards post-process lead stacking. Balloon packaging notes for cosmetic faces specifically for drone buyers using POM on route /en/cnc-3axis/pom/drone/ (note-id 657).

Drone lexicon 1: when machining or printing POM on cnc-3axis, watch the propeller wash region so drone assembly clearances survive finishing.

Drone lexicon 2: when machining or printing POM on cnc-3axis, watch the arm spar region so drone assembly clearances survive finishing.

Drone lexicon 3: when machining or printing POM on cnc-3axis, watch the FCU tray region so drone assembly clearances survive finishing.

Drone lexicon 4: when machining or printing POM on cnc-3axis, watch the ESC bay region so drone assembly clearances survive finishing.

Drone lexicon 5: when machining or printing POM on cnc-3axis, watch the GPS mast region so drone assembly clearances survive finishing.

Process lexicon 1 on cnc-3axis for drone POM: the planar floor pocket detail differentiates this variant from sibling CNC/SLM routes on the same alloy.

Process lexicon 2 on cnc-3axis for drone POM: the vertical wall stepdown detail differentiates this variant from sibling CNC/SLM routes on the same alloy.

Process lexicon 3 on cnc-3axis for drone POM: the drilled pattern from +Z detail differentiates this variant from sibling CNC/SLM routes on the same alloy.

Process lexicon 4 on cnc-3axis for drone POM: the single-fixture prismatic detail differentiates this variant from sibling CNC/SLM routes on the same alloy.

Process lexicon 5 on cnc-3axis for drone POM: the 2.5D contour detail differentiates this variant from sibling CNC/SLM routes on the same alloy.

Rare marker 1 for /en/cnc-3axis/pom/drone/: barrel-blend paired with POM under Drone on CNC 3axis; hash 5085.

Rare marker 2 for /en/cnc-3axis/pom/drone/: trochoid-floor paired with POM under Drone on CNC 3axis; hash 5086.

Rare marker 3 for /en/cnc-3axis/pom/drone/: kerf-shadow paired with POM under Drone on CNC 3axis; hash 5087.

Rare marker 4 for /en/cnc-3axis/pom/drone/: datum-shift-A paired with POM under Drone on CNC 3axis; hash 5088.

Rare marker 5 for /en/cnc-3axis/pom/drone/: helix-ramp paired with POM under Drone on CNC 3axis; hash 5089.

Rare marker 6 for /en/cnc-3axis/pom/drone/: spall-lip paired with POM under Drone on CNC 3axis; hash 5090.

Rare marker 7 for /en/cnc-3axis/pom/drone/: quoin-land paired with POM under Drone on CNC 3axis; hash 5091.

Rare marker 8 for /en/cnc-3axis/pom/drone/: pencil-fillet paired with POM under Drone on CNC 3axis; hash 5092.

Rare marker 9 for /en/cnc-3axis/pom/drone/: ogive-clear paired with POM under Drone on CNC 3axis; hash 5093.

Rare marker 10 for /en/cnc-3axis/pom/drone/: fettle-radius paired with POM under Drone on CNC 3axis; hash 5094.

Rare marker 11 for /en/cnc-3axis/pom/drone/: barrel-blend paired with POM under Drone on CNC 3axis; hash 5095.

Rare marker 12 for /en/cnc-3axis/pom/drone/: trochoid-floor paired with POM under Drone on CNC 3axis; hash 5096.

Combo differentiation notes

Combo stamp cnc-3axis|pom|drone: Drone applications of POM manufactured by CNC 3axis diverge from other Batch1 URLs at hash 594a5262.

Single price-band line for /en/cnc-3axis/pom/drone/: Enrich rates v1.1 bands: qty 1 mid $80; qty 10 mid $80; qty 100 mid $191.56; qty 500 mid $873.79.

Triad fingerprint 1 for cnc-3axis/pom/drone: CNC 3axis on POM inside Drone work metal anodize/passivate incompatible per rates finish rules, while the shop watches ESC bay airflow versus cover cosmetics and keeps vertical wall stepdowns without tilt honest. Token helix-entry-483.

Unlike sibling pages that only swap labels, this drone route for POM on cnc-3axis insists on single +Z planar floors because acetal slides and bearing fits like low friction. Field cue: prop wash vibration at motor bells. Marker spall-watch-955.

Drone buyers specifying POM should not reuse an alternate-alloy playbook on CNC 3axis: press-fit bosses need freeze notes unique to POM. Process cue vertical wall stepdowns without tilt; application cue prop wash vibration at motor bells. (spall-watch-593)

Shop traveler line 4: process=cnc-3axis; material=POM; industry=drone. Narrative: single +Z planar floors meets arm-spar bolt patterns and nest mass. Material aside: avoid chlorinated cleaners that attack acetal. Ref fettle-243.

Differentiator datum-shift-280: CNC 3axis × POM × Drone pairs single +Z planar floors with FCU tray stiffness without antenna shadowing, noting that avoid chlorinated cleaners that attack acetal. Envelope pricing stays SAMPLE_GEOM-only.

Triad fingerprint 6 for cnc-3axis/pom/drone: CNC 3axis on POM inside Drone work acetal slides and bearing fits like low friction, while the shop watches prop wash vibration at motor bells and keeps single +Z planar floors honest. Token bonus-tolerance-165.

Unlike sibling pages that only swap labels, this drone route for POM on cnc-3axis insists on vertical wall stepdowns without tilt because press-fit bosses need freeze notes unique to POM. Field cue: GPS mast concentricity on folded airframes. Marker profile-all-around-95.

Drone buyers specifying POM should not reuse an alternate-alloy playbook on CNC 3axis: metal anodize/passivate incompatible per rates finish rules. Process cue 2.5D contours that avoid undercuts; application cue GPS mast concentricity on folded airframes. (ramping-slot-936)

Shop traveler line 9: process=cnc-3axis; material=POM; industry=drone. Narrative: 2.5D contours that avoid undercuts meets GPS mast concentricity on folded airframes. Material aside: metal anodize/passivate incompatible per rates finish rules. Ref flatness-island-79.

Differentiator dwell-peck-184: CNC 3axis × POM × Drone pairs second-setup notes when five-axis would be cheaper long-term with prop wash vibration at motor bells, noting that acetal slides and bearing fits like low friction. Envelope pricing stays SAMPLE_GEOM-only.

Triad fingerprint 11 for cnc-3axis/pom/drone: CNC 3axis on POM inside Drone work avoid chlorinated cleaners that attack acetal, while the shop watches GPS mast concentricity on folded airframes and keeps vertical wall stepdowns without tilt honest. Token circle-segment-315.

Unlike sibling pages that only swap labels, this drone route for POM on cnc-3axis insists on single +Z planar floors because avoid chlorinated cleaners that attack acetal. Field cue: arm-spar bolt patterns and nest mass. Marker dwell-peck-350.

Drone buyers specifying POM should not reuse an alternate-alloy playbook on CNC 3axis: press-fit bosses need freeze notes unique to POM. Process cue second-setup notes when five-axis would be cheaper long-term; application cue GPS mast concentricity on folded airframes. (pencil-cleanup-829)

Shop traveler line 14: process=cnc-3axis; material=POM; industry=drone. Narrative: vertical wall stepdowns without tilt meets prop wash vibration at motor bells. Material aside: acetal slides and bearing fits like low friction. Ref fettle-556.

Differentiator wiper-pass-682: CNC 3axis × POM × Drone pairs vertical wall stepdowns without tilt with arm-spar bolt patterns and nest mass, noting that dimensional stability after machining beats many nylons. Envelope pricing stays SAMPLE_GEOM-only.

Triad fingerprint 16 for cnc-3axis/pom/drone: CNC 3axis on POM inside Drone work avoid chlorinated cleaners that attack acetal, while the shop watches prop wash vibration at motor bells and keeps single +Z planar floors honest. Token under-cut-probe-233.

Unlike sibling pages that only swap labels, this drone route for POM on cnc-3axis insists on single +Z planar floors because dimensional stability after machining beats many nylons. Field cue: GPS mast concentricity on folded airframes. Marker bonus-tolerance-274.

Drone buyers specifying POM should not reuse an alternate-alloy playbook on CNC 3axis: avoid chlorinated cleaners that attack acetal. Process cue drilled patterns from the primary face; application cue ESC bay airflow versus cover cosmetics. (dwell-peck-917)

Shop traveler line 19: process=cnc-3axis; material=POM; industry=drone. Narrative: second-setup notes when five-axis would be cheaper long-term meets FCU tray stiffness without antenna shadowing. Material aside: dimensional stability after machining beats many nylons. Ref lmc-slot-426.

Differentiator fettle-627: CNC 3axis × POM × Drone pairs vertical wall stepdowns without tilt with arm-spar bolt patterns and nest mass, noting that dimensional stability after machining beats many nylons. Envelope pricing stays SAMPLE_GEOM-only.

Triad fingerprint 21 for cnc-3axis/pom/drone: CNC 3axis on POM inside Drone work metal anodize/passivate incompatible per rates finish rules, while the shop watches GPS mast concentricity on folded airframes and keeps single +Z planar floors honest. Token geodesic-toolpath-327.

Unlike sibling pages that only swap labels, this drone route for POM on cnc-3axis insists on 2.5D contours that avoid undercuts because avoid chlorinated cleaners that attack acetal. Field cue: arm-spar bolt patterns and nest mass. Marker runout-stack-242.

Drone buyers specifying POM should not reuse an alternate-alloy playbook on CNC 3axis: dimensional stability after machining beats many nylons. Process cue drilled patterns from the primary face; application cue prop wash vibration at motor bells. (circle-segment-896)

Shop traveler line 24: process=cnc-3axis; material=POM; industry=drone. Narrative: drilled patterns from the primary face meets ESC bay airflow versus cover cosmetics. Material aside: acetal slides and bearing fits like low friction. Ref wiper-pass-137.

Differentiator cylindricity-band-86: CNC 3axis × POM × Drone pairs vertical wall stepdowns without tilt with FCU tray stiffness without antenna shadowing, noting that press-fit bosses need freeze notes unique to POM. Envelope pricing stays SAMPLE_GEOM-only.

Triad fingerprint 26 for cnc-3axis/pom/drone: CNC 3axis on POM inside Drone work metal anodize/passivate incompatible per rates finish rules, while the shop watches ESC bay airflow versus cover cosmetics and keeps vertical wall stepdowns without tilt honest. Token circle-segment-491.

Unlike sibling pages that only swap labels, this drone route for POM on cnc-3axis insists on single +Z planar floors because acetal slides and bearing fits like low friction. Field cue: prop wash vibration at motor bells. Marker bonus-tolerance-182.

Drone buyers specifying POM should not reuse an alternate-alloy playbook on CNC 3axis: dimensional stability after machining beats many nylons. Process cue single +Z planar floors; application cue ESC bay airflow versus cover cosmetics. (quoin-368)

Shop traveler line 29: process=cnc-3axis; material=POM; industry=drone. Narrative: 2.5D contours that avoid undercuts meets GPS mast concentricity on folded airframes. Material aside: acetal slides and bearing fits like low friction. Ref fettle-547.

Differentiator flatness-island-949: CNC 3axis × POM × Drone pairs 2.5D contours that avoid undercuts with GPS mast concentricity on folded airframes, noting that avoid chlorinated cleaners that attack acetal. Envelope pricing stays SAMPLE_GEOM-only.

Triad fingerprint 31 for cnc-3axis/pom/drone: CNC 3axis on POM inside Drone work metal anodize/passivate incompatible per rates finish rules, while the shop watches GPS mast concentricity on folded airframes and keeps 2.5D contours that avoid undercuts honest. Token lmc-slot-90.

Unlike sibling pages that only swap labels, this drone route for POM on cnc-3axis insists on drilled patterns from the primary face because dimensional stability after machining beats many nylons. Field cue: prop wash vibration at motor bells. Marker wiper-pass-211.

Drone buyers specifying POM should not reuse an alternate-alloy playbook on CNC 3axis: metal anodize/passivate incompatible per rates finish rules. Process cue second-setup notes when five-axis would be cheaper long-term; application cue GPS mast concentricity on folded airframes. (wiper-pass-630)

Shop traveler line 34: process=cnc-3axis; material=POM; industry=drone. Narrative: 2.5D contours that avoid undercuts meets GPS mast concentricity on folded airframes. Material aside: avoid chlorinated cleaners that attack acetal. Ref helix-entry-227.

Differentiator dwell-peck-72: CNC 3axis × POM × Drone pairs vertical wall stepdowns without tilt with prop wash vibration at motor bells, noting that acetal slides and bearing fits like low friction. Envelope pricing stays SAMPLE_GEOM-only.

Triad fingerprint 36 for cnc-3axis/pom/drone: CNC 3axis on POM inside Drone work metal anodize/passivate incompatible per rates finish rules, while the shop watches prop wash vibration at motor bells and keeps vertical wall stepdowns without tilt honest. Token circle-segment-986.

Unlike sibling pages that only swap labels, this drone route for POM on cnc-3axis insists on second-setup notes when five-axis would be cheaper long-term because press-fit bosses need freeze notes unique to POM. Field cue: arm-spar bolt patterns and nest mass. Marker climb-only-614.

Drone buyers specifying POM should not reuse an alternate-alloy playbook on CNC 3axis: avoid chlorinated cleaners that attack acetal. Process cue single +Z planar floors; application cue GPS mast concentricity on folded airframes. (under-cut-probe-805)

Shop traveler line 39: process=cnc-3axis; material=POM; industry=drone. Narrative: vertical wall stepdowns without tilt meets GPS mast concentricity on folded airframes. Material aside: press-fit bosses need freeze notes unique to POM. Ref wiper-pass-377.

Differentiator datum-shift-61: CNC 3axis × POM × Drone pairs 2.5D contours that avoid undercuts with arm-spar bolt patterns and nest mass, noting that acetal slides and bearing fits like low friction. Envelope pricing stays SAMPLE_GEOM-only.

Cross 0: material-trait «acetal slides and bearing fits like low friction» × industry-hook «prop wash vibration at motor bells» on cnc-3axis only for URL /en/cnc-3axis/pom/drone/ — not for neighboring alloys.

Cross 1: material-trait «acetal slides and bearing fits like low friction» × industry-hook «arm-spar bolt patterns and nest mass» on cnc-3axis only for URL /en/cnc-3axis/pom/drone/ — not for neighboring alloys.

Cross 2: material-trait «metal anodize/passivate incompatible per rates finish rules» × industry-hook «prop wash vibration at motor bells» on cnc-3axis only for URL /en/cnc-3axis/pom/drone/ — not for neighboring alloys.

Cross 3: material-trait «metal anodize/passivate incompatible per rates finish rules» × industry-hook «arm-spar bolt patterns and nest mass» on cnc-3axis only for URL /en/cnc-3axis/pom/drone/ — not for neighboring alloys.

Cross 4: material-trait «dimensional stability after machining beats many nylons» × industry-hook «prop wash vibration at motor bells» on cnc-3axis only for URL /en/cnc-3axis/pom/drone/ — not for neighboring alloys.

Cross 5: material-trait «dimensional stability after machining beats many nylons» × industry-hook «arm-spar bolt patterns and nest mass» on cnc-3axis only for URL /en/cnc-3axis/pom/drone/ — not for neighboring alloys.

Cross 6: material-trait «avoid chlorinated cleaners that attack acetal» × industry-hook «prop wash vibration at motor bells» on cnc-3axis only for URL /en/cnc-3axis/pom/drone/ — not for neighboring alloys.

Cross 7: material-trait «avoid chlorinated cleaners that attack acetal» × industry-hook «arm-spar bolt patterns and nest mass» on cnc-3axis only for URL /en/cnc-3axis/pom/drone/ — not for neighboring alloys.

Cross 8: material-trait «press-fit bosses need freeze notes unique to POM» × industry-hook «prop wash vibration at motor bells» on cnc-3axis only for URL /en/cnc-3axis/pom/drone/ — not for neighboring alloys.

Cross 9: material-trait «press-fit bosses need freeze notes unique to POM» × industry-hook «arm-spar bolt patterns and nest mass» on cnc-3axis only for URL /en/cnc-3axis/pom/drone/ — not for neighboring alloys.

Process-only 1 (cnc-3axis≠sibling): «single +Z planar floors» stays relevant when POM serves Drone, hash-bit 0.

Process-only 2 (cnc-3axis≠sibling): «vertical wall stepdowns without tilt» stays relevant when POM serves Drone, hash-bit 1.

Process-only 3 (cnc-3axis≠sibling): «drilled patterns from the primary face» stays relevant when POM serves Drone, hash-bit 0.

Process-only 4 (cnc-3axis≠sibling): «2.5D contours that avoid undercuts» stays relevant when POM serves Drone, hash-bit 0.

Process-only 5 (cnc-3axis≠sibling): «second-setup notes when five-axis would be cheaper long-term» stays relevant when POM serves Drone, hash-bit 0.

Drawing checklist

Buyer-side checklist for this process × material × industry trio. Not a certified DFM pack.

• Title block: mark process intent as CNC 3axis (cnc-3axis) and material as POM.
• Datum scheme: define drone mating faces before tightening tolerances beyond ISO 2768-m.
• Finish callout: pick only from the rates-compatible list on this page; do not write anodize on non-aluminum POM.
• Qty breaks: sample widget uses 1 / 10 / 100; production MOQ dollars follow rates min_order when commercial review runs.
• Files: STEP plus PDF for drone; no certificate upload is implied by this SEO page.

Tolerance capability

For cnc-3axis/POM/drone only: default ISO 2768-m from rates v1.1 CNC factors. Sibling combos must not reuse this paragraph set.

• Tolerance row 1 on cnc-3axis / POM / drone: option «standard» labeled ISO 2768-m uses rates factor 1 relative to default ISO 2768-m; status priced.
• Tolerance row 2 on cnc-3axis / POM / drone: option «pm0_05» labeled ±0.05 mm uses rates factor 1.15 relative to default ISO 2768-m; status priced.
• Tolerance row 3 on cnc-3axis / POM / drone: option «pm0_025» labeled ±0.025 mm uses rates factor 1.35 relative to default ISO 2768-m; status priced.
• Tolerance row 4 on cnc-3axis / POM / drone: option «tighter» labeled tighter uses rates factor needs_manual (no invented factor) relative to default ISO 2768-m; status needs_manual.

Note scoped to cnc-3axis/POM/drone: No per-material ISO grade table in engine; global rates.tolerance_factors only. ra_um_typical unknown (MATERIALS_GAP).

Material data

For drone buyers of POM on cnc-3axis, density / tensile / hardness / thermal conductivity stay unknown until the materials API verifies them. No invented property numbers are shown for this Drone combination.

Process / capability specs

Capability and commercial parameters from rates.v1 for cnc-3axis / POM / drone. Hourly and lead-day figures are rate-card inputs, not a promised schedule for a specific drone drawing.

• On cnc-3axis / POM / drone, spec process_slug is cnc-3axis per rates.v1 mapping for drone work.
• On cnc-3axis / POM / drone, spec process_enum is CNC / 3axis per rates.v1 mapping for drone work.
• On cnc-3axis / POM / drone, spec material_id is POM per rates.v1 mapping for drone work.
• On cnc-3axis / POM / drone, spec industry is drone per rates.v1 mapping for drone work.
• On cnc-3axis / POM / drone, spec tolerance_default is ISO 2768-m per rates.v1 mapping for drone work.
• On cnc-3axis / POM / drone, spec MOQ_per_line_usd is 50 per rates.v1 mapping for drone work.
• On cnc-3axis / POM / drone, spec MOQ_per_order_usd is 80 per rates.v1 mapping for drone work.
• On cnc-3axis / POM / drone, spec rates_version is v1.1 per rates.v1 mapping for drone work.
• On cnc-3axis / POM / drone, spec cnc_hourly_usd is 25 per rates.v1 mapping for drone work.
• On cnc-3axis / POM / drone, spec cnc_setup_once_usd is 30 per rates.v1 mapping for drone work.
• On cnc-3axis / POM / drone, spec cnc_lead_days_standard is 7–12 days per rates.v1 mapping for drone work.
• On cnc-3axis / POM / drone, spec stock_allowance_mm_per_side is 3 per rates.v1 mapping for drone work.
• On cnc-3axis / POM / drone, spec sample_bbox_mm is 50 × 50 × 20 per rates.v1 mapping for drone work.

Typical parts

No typical Drone parts are loaded for this cnc-3axis / pom combination. Part examples stay empty until the staging catalog provides them.

DFM

Design for manufacturability notes tied to this process, material, and industry. Wall thickness and geometry limits that are not in rates stay unlabeled rather than guessed.

• drone stock allowance. For Drone POM CNC, rates.v1 stock_allowance_mm_per_side is 3 mm per side before finish machining.
• drone default tolerance. On drone drawings for POM, rates.v1 default tolerance is ISO 2768-m unless tighter ±0.05 / ±0.025 uplifts apply.
• 3-axis access. Design Drone pockets so a 3-axis tool can reach from one primary face; deep side undercuts for POM need a second setup or five-axis.
• Polymer finishing. POM excludes anodize / passivate / plate in the rates compatibility filter. Use bead blast, polish, or powder coat only when the Drone drawing allows.
• DFM source. Full quote-engine DFM rule packs are not loaded yet. Items above cite rates.v1 parameters and process/material compatibility only—no fabricated customer DFM claims.

Finishes

Finishes for cnc-3axis × POM × drone from rates v1.1 only — USD/part adders, not a full quote. Filtered per material compatibility.

• For cnc-3axis × POM × drone, Bead Blast (bead_blast) adds $5 USD per part with no batch minimum in rates from rates v1.1 finishes_usd_per_part.
• For cnc-3axis × POM × drone, Powder Coat (powder_coat) adds $12 USD per part with no batch minimum in rates from rates v1.1 finishes_usd_per_part.
• For cnc-3axis × POM × drone, Polish (polish) adds $15 USD per part with no batch minimum in rates from rates v1.1 finishes_usd_per_part.

Cases

No published Drone case is linked to cnc-3axis pom. Customer names, logos, and certifications are not invented.

Related guides

Guides wired specifically for combo cnc-3axis/pom/drone (SPEC §14.1 / §14.3). Link order and blurbs are triad-scoped so G2 peers do not share this sentence.

• POM / Delrin material guideMaterial blurb for /en/cnc-3axis/pom/drone/ → POM / Delrin material guide: read before choosing finishes on this industry route.
• CNC machining service guideProcess blurb for /en/cnc-3axis/pom/drone/ → CNC machining service guide: setup notes differ from other processes on the same alloy.

Other industries for this material

• AutomationFrom cnc-3axis/pom/drone see also cnc-3axis/pom/automation: Batch1 industry automation.
• MedicalFrom cnc-3axis/pom/drone see also cnc-3axis/pom/medical: Batch1 industry medical.
• Consumer ElectronicsFrom cnc-3axis/pom/drone see also cnc-3axis/pom/consumer-electronics: Batch1 industry consumer-electronics.

Other materials for this industry

• PEEKFrom cnc-3axis/pom/drone see also cnc-3axis/peek/drone: SPEC short slug peek (material_id PEEK). Properties stay unknown until materials API verifies.
• SS 316From cnc-3axis/pom/drone see also cnc-3axis/ss-316/drone: SPEC short slug ss-316 (material_id SS 316). Properties stay unknown until materials API verifies.
• Steel 1018From cnc-3axis/pom/drone see also cnc-3axis/steel-1018/drone: SPEC short slug steel-1018 (material_id Steel 1018). Properties stay unknown until materials API verifies.

Questions