CNC 3axis POM for Electronics Thermal

Combination notes

Among Electronics Thermal projects, this page is the cnc-3axis × pom × electronics-thermal route for POM. Applied to electronics-thermal: Three-axis CNC mills planar pockets, drilled holes, and prismatic profiles with a single setup on the primary face. Contoured undercuts that need simultaneous multi-axis toolpaths are out of scope for this variant and should move to five-axis or a second setup. For Electronics Thermal material choice POM: POM (acetal) machines to tight bearing fits and low friction slides. Metal finishes such as anodize or passivate are incompatible; rates list bead blast, polish, and powder coat for polymers. Electronics thermal parts (heat spreaders, cold plates) prioritize conductivity and flatness on mating faces. Aluminum grades dominate; anodize thickness must be called out so it does not starve thermal contact. The electronics-thermal example quote envelope stays 50 × 50 × 20 mm at quantities 1, 10, and 100. Mid prices for this Electronics Thermal combo come from staging /rates or a priced matrix row—never invented marketing copy.

Industry application notes

For electronics thermal programs, CNC 3axis on POM is positioned as a subtractive route under URL slug cnc-3axis. Buyers typically upload STEP/IGES with electronics thermal-specific datums; this page does not invent a case study or logo for that upload.

Electronics thermal spreaders and vapor-chamber lids in POM need flatness callouts on the mating face. CNC 3axis stock allowance from rates still applies; thermal grease grooves belong on the drawing, not as invented features here.

Three-axis toolpaths for this electronics-thermal POM combo prefer planar floors and draft-free walls; side undercuts for electronics-thermal clips need a second fixture that is not priced into the sample mid.

Cross-links on this page point only to other matrix combinations sharing cnc-3axis with different industries or materials—not to fabricated customer stories. Indexing stays gated (noindex while Batch1 preview quality gate applies).

Combo-specific manufacturing notes

Within Electronics Thermal (electronics-thermal) programs, note 1: POM via CNC 3axis (cnc-3axis) foregrounds post-process lead stacking. Lock second-op datums after roughing specifically for electronics-thermal buyers using POM on route /en/cnc-3axis/pom/electronics-thermal/ (note-id 82556).

Within Electronics Thermal (electronics-thermal) programs, note 2: POM via CNC 3axis (cnc-3axis) balances powder-coat edge wrap. Call out inspection balloons on critical OD/ID specifically for electronics-thermal buyers using POM on route /en/cnc-3axis/pom/electronics-thermal/ (note-id 82653).

Within Electronics Thermal (electronics-thermal) programs, note 3: POM via CNC 3axis (cnc-3axis) guards corrosion margin. Balloon packaging notes for cosmetic faces specifically for electronics-thermal buyers using POM on route /en/cnc-3axis/pom/electronics-thermal/ (note-id 82750).

Within Electronics Thermal (electronics-thermal) programs, note 4: POM via CNC 3axis (cnc-3axis) centers tool-access envelope. Declare torque patches on soft alloys specifically for electronics-thermal buyers using POM on route /en/cnc-3axis/pom/electronics-thermal/ (note-id 82847).

Within Electronics Thermal (electronics-thermal) programs, note 5: POM via CNC 3axis (cnc-3axis) anchors passivate coverage. Document keep-out for five-axis holders specifically for electronics-thermal buyers using POM on route /en/cnc-3axis/pom/electronics-thermal/ (note-id 82944).

Within Electronics Thermal (electronics-thermal) programs, note 6: POM via CNC 3axis (cnc-3axis) isolates thermal path. Separate steady-rest notes on slender turns specifically for electronics-thermal buyers using POM on route /en/cnc-3axis/pom/electronics-thermal/ (note-id 83041).

Within Electronics Thermal (electronics-thermal) programs, note 7: POM via CNC 3axis (cnc-3axis) emphasizes vacuum face cleanliness. Capture HIP/heat-treat flags when rates list batch adders specifically for electronics-thermal buyers using POM on route /en/cnc-3axis/pom/electronics-thermal/ (note-id 83138).

Within Electronics Thermal (electronics-thermal) programs, note 8: POM via CNC 3axis (cnc-3axis) weights anodize thickness stackup. Freeze thread reliefs before finish specifically for electronics-thermal buyers using POM on route /en/cnc-3axis/pom/electronics-thermal/ (note-id 83235).

Within Electronics Thermal (electronics-thermal) programs, note 9: POM via CNC 3axis (cnc-3axis) sequences mass budget. Schedule masked anodize zones when alloy allows specifically for electronics-thermal buyers using POM on route /en/cnc-3axis/pom/electronics-thermal/ (note-id 83332).

Within Electronics Thermal (electronics-thermal) programs, note 10: POM via CNC 3axis (cnc-3axis) prioritizes cable egress. Annotate escape holes for powder if SLM specifically for electronics-thermal buyers using POM on route /en/cnc-3axis/pom/electronics-thermal/ (note-id 83429).

Within Electronics Thermal (electronics-thermal) programs, note 11: POM via CNC 3axis (cnc-3axis) foregrounds support survivor ribs. Lock second-op datums after roughing specifically for electronics-thermal buyers using POM on route /en/cnc-3axis/pom/electronics-thermal/ (note-id 83526).

Within Electronics Thermal (electronics-thermal) programs, note 12: POM via CNC 3axis (cnc-3axis) balances fixture stiffness. Call out inspection balloons on critical OD/ID specifically for electronics-thermal buyers using POM on route /en/cnc-3axis/pom/electronics-thermal/ (note-id 83623).

Within Electronics Thermal (electronics-thermal) programs, note 13: POM via CNC 3axis (cnc-3axis) guards bearing bore stack. Balloon packaging notes for cosmetic faces specifically for electronics-thermal buyers using POM on route /en/cnc-3axis/pom/electronics-thermal/ (note-id 83720).

Within Electronics Thermal (electronics-thermal) programs, note 14: POM via CNC 3axis (cnc-3axis) centers chip evacuation. Declare torque patches on soft alloys specifically for electronics-thermal buyers using POM on route /en/cnc-3axis/pom/electronics-thermal/ (note-id 83817).

Within Electronics Thermal (electronics-thermal) programs, note 15: POM via CNC 3axis (cnc-3axis) anchors polish lay direction. Document keep-out for five-axis holders specifically for electronics-thermal buyers using POM on route /en/cnc-3axis/pom/electronics-thermal/ (note-id 83914).

Within Electronics Thermal (electronics-thermal) programs, note 16: POM via CNC 3axis (cnc-3axis) isolates cosmetic edge break. Separate steady-rest notes on slender turns specifically for electronics-thermal buyers using POM on route /en/cnc-3axis/pom/electronics-thermal/ (note-id 84011).

Within Electronics Thermal (electronics-thermal) programs, note 17: POM via CNC 3axis (cnc-3axis) emphasizes post-process lead stacking. Capture HIP/heat-treat flags when rates list batch adders specifically for electronics-thermal buyers using POM on route /en/cnc-3axis/pom/electronics-thermal/ (note-id 84108).

Within Electronics Thermal (electronics-thermal) programs, note 18: POM via CNC 3axis (cnc-3axis) weights powder-coat edge wrap. Freeze thread reliefs before finish specifically for electronics-thermal buyers using POM on route /en/cnc-3axis/pom/electronics-thermal/ (note-id 84205).

Within Electronics Thermal (electronics-thermal) programs, note 19: POM via CNC 3axis (cnc-3axis) sequences corrosion margin. Schedule masked anodize zones when alloy allows specifically for electronics-thermal buyers using POM on route /en/cnc-3axis/pom/electronics-thermal/ (note-id 84302).

Within Electronics Thermal (electronics-thermal) programs, note 20: POM via CNC 3axis (cnc-3axis) prioritizes tool-access envelope. Annotate escape holes for powder if SLM specifically for electronics-thermal buyers using POM on route /en/cnc-3axis/pom/electronics-thermal/ (note-id 84399).

Within Electronics Thermal (electronics-thermal) programs, note 21: POM via CNC 3axis (cnc-3axis) foregrounds passivate coverage. Lock second-op datums after roughing specifically for electronics-thermal buyers using POM on route /en/cnc-3axis/pom/electronics-thermal/ (note-id 84496).

Within Electronics Thermal (electronics-thermal) programs, note 22: POM via CNC 3axis (cnc-3axis) balances thermal path. Call out inspection balloons on critical OD/ID specifically for electronics-thermal buyers using POM on route /en/cnc-3axis/pom/electronics-thermal/ (note-id 84593).

Within Electronics Thermal (electronics-thermal) programs, note 23: POM via CNC 3axis (cnc-3axis) guards vacuum face cleanliness. Balloon packaging notes for cosmetic faces specifically for electronics-thermal buyers using POM on route /en/cnc-3axis/pom/electronics-thermal/ (note-id 84690).

Within Electronics Thermal (electronics-thermal) programs, note 24: POM via CNC 3axis (cnc-3axis) centers anodize thickness stackup. Declare torque patches on soft alloys specifically for electronics-thermal buyers using POM on route /en/cnc-3axis/pom/electronics-thermal/ (note-id 84787).

Within Electronics Thermal (electronics-thermal) programs, note 25: POM via CNC 3axis (cnc-3axis) anchors mass budget. Document keep-out for five-axis holders specifically for electronics-thermal buyers using POM on route /en/cnc-3axis/pom/electronics-thermal/ (note-id 84884).

Within Electronics Thermal (electronics-thermal) programs, note 26: POM via CNC 3axis (cnc-3axis) isolates cable egress. Separate steady-rest notes on slender turns specifically for electronics-thermal buyers using POM on route /en/cnc-3axis/pom/electronics-thermal/ (note-id 84981).

Within Electronics Thermal (electronics-thermal) programs, note 27: POM via CNC 3axis (cnc-3axis) emphasizes support survivor ribs. Capture HIP/heat-treat flags when rates list batch adders specifically for electronics-thermal buyers using POM on route /en/cnc-3axis/pom/electronics-thermal/ (note-id 85078).

Within Electronics Thermal (electronics-thermal) programs, note 28: POM via CNC 3axis (cnc-3axis) weights fixture stiffness. Freeze thread reliefs before finish specifically for electronics-thermal buyers using POM on route /en/cnc-3axis/pom/electronics-thermal/ (note-id 85175).

Electronics Thermal lexicon 1: when machining or printing POM on cnc-3axis, watch the vapor chamber region so electronics-thermal assembly clearances survive finishing.

Electronics Thermal lexicon 2: when machining or printing POM on cnc-3axis, watch the skived fin region so electronics-thermal assembly clearances survive finishing.

Electronics Thermal lexicon 3: when machining or printing POM on cnc-3axis, watch the TIM pad region so electronics-thermal assembly clearances survive finishing.

Electronics Thermal lexicon 4: when machining or printing POM on cnc-3axis, watch the cold plate region so electronics-thermal assembly clearances survive finishing.

Electronics Thermal lexicon 5: when machining or printing POM on cnc-3axis, watch the heat spreader region so electronics-thermal assembly clearances survive finishing.

Process lexicon 1 on cnc-3axis for electronics-thermal POM: the planar floor pocket detail differentiates this variant from sibling CNC/SLM routes on the same alloy.

Process lexicon 2 on cnc-3axis for electronics-thermal POM: the vertical wall stepdown detail differentiates this variant from sibling CNC/SLM routes on the same alloy.

Process lexicon 3 on cnc-3axis for electronics-thermal POM: the drilled pattern from +Z detail differentiates this variant from sibling CNC/SLM routes on the same alloy.

Process lexicon 4 on cnc-3axis for electronics-thermal POM: the single-fixture prismatic detail differentiates this variant from sibling CNC/SLM routes on the same alloy.

Process lexicon 5 on cnc-3axis for electronics-thermal POM: the 2.5D contour detail differentiates this variant from sibling CNC/SLM routes on the same alloy.

Rare marker 1 for /en/cnc-3axis/pom/electronics-thermal/: spall-lip paired with POM under Electronics Thermal on CNC 3axis; hash 5100.

Rare marker 2 for /en/cnc-3axis/pom/electronics-thermal/: quoin-land paired with POM under Electronics Thermal on CNC 3axis; hash 5101.

Rare marker 3 for /en/cnc-3axis/pom/electronics-thermal/: pencil-fillet paired with POM under Electronics Thermal on CNC 3axis; hash 5102.

Rare marker 4 for /en/cnc-3axis/pom/electronics-thermal/: ogive-clear paired with POM under Electronics Thermal on CNC 3axis; hash 5103.

Rare marker 5 for /en/cnc-3axis/pom/electronics-thermal/: fettle-radius paired with POM under Electronics Thermal on CNC 3axis; hash 5104.

Rare marker 6 for /en/cnc-3axis/pom/electronics-thermal/: barrel-blend paired with POM under Electronics Thermal on CNC 3axis; hash 5105.

Rare marker 7 for /en/cnc-3axis/pom/electronics-thermal/: trochoid-floor paired with POM under Electronics Thermal on CNC 3axis; hash 5106.

Rare marker 8 for /en/cnc-3axis/pom/electronics-thermal/: kerf-shadow paired with POM under Electronics Thermal on CNC 3axis; hash 5107.

Rare marker 9 for /en/cnc-3axis/pom/electronics-thermal/: datum-shift-A paired with POM under Electronics Thermal on CNC 3axis; hash 5108.

Rare marker 10 for /en/cnc-3axis/pom/electronics-thermal/: helix-ramp paired with POM under Electronics Thermal on CNC 3axis; hash 5109.

Rare marker 11 for /en/cnc-3axis/pom/electronics-thermal/: spall-lip paired with POM under Electronics Thermal on CNC 3axis; hash 5110.

Rare marker 12 for /en/cnc-3axis/pom/electronics-thermal/: quoin-land paired with POM under Electronics Thermal on CNC 3axis; hash 5111.

Combo differentiation notes

Combo stamp cnc-3axis|pom|electronics-thermal: Electronics Thermal applications of POM manufactured by CNC 3axis diverge from other Batch1 URLs at hash 10b052a9.

Single price-band line for /en/cnc-3axis/pom/electronics-thermal/: Enrich rates v1.1 bands: qty 1 mid $80; qty 10 mid $80; qty 100 mid $191.56; qty 500 mid $873.79.

Triad fingerprint 1 for cnc-3axis/pom/electronics-thermal: CNC 3axis on POM inside Electronics Thermal work avoid chlorinated cleaners that attack acetal, while the shop watches vapor-chamber pocket depth and keeps second-setup notes when five-axis would be cheaper long-term honest. Token geodesic-toolpath-347.

Unlike sibling pages that only swap labels, this electronics-thermal route for POM on cnc-3axis insists on second-setup notes when five-axis would be cheaper long-term because metal anodize/passivate incompatible per rates finish rules. Field cue: skived-fin bond-line flatness. Marker quoin-346.

Electronics Thermal buyers specifying POM should not reuse an alternate-alloy playbook on CNC 3axis: dimensional stability after machining beats many nylons. Process cue vertical wall stepdowns without tilt; application cue vapor-chamber pocket depth. (fretting-edge-820)

Shop traveler line 4: process=cnc-3axis; material=POM; industry=electronics-thermal. Narrative: second-setup notes when five-axis would be cheaper long-term meets vapor-chamber pocket depth. Material aside: avoid chlorinated cleaners that attack acetal. Ref helix-entry-184.

Differentiator conventional-exit-911: CNC 3axis × POM × Electronics Thermal pairs 2.5D contours that avoid undercuts with TIM pad compression set, noting that avoid chlorinated cleaners that attack acetal. Envelope pricing stays SAMPLE_GEOM-only.

Triad fingerprint 6 for cnc-3axis/pom/electronics-thermal: CNC 3axis on POM inside Electronics Thermal work avoid chlorinated cleaners that attack acetal, while the shop watches TIM pad compression set and keeps vertical wall stepdowns without tilt honest. Token spall-watch-742.

Unlike sibling pages that only swap labels, this electronics-thermal route for POM on cnc-3axis insists on vertical wall stepdowns without tilt because press-fit bosses need freeze notes unique to POM. Field cue: skived-fin bond-line flatness. Marker rest-machining-905.

Electronics Thermal buyers specifying POM should not reuse an alternate-alloy playbook on CNC 3axis: metal anodize/passivate incompatible per rates finish rules. Process cue drilled patterns from the primary face; application cue anodize thickness starving thermal contact. (fretting-edge-418)

Shop traveler line 9: process=cnc-3axis; material=POM; industry=electronics-thermal. Narrative: 2.5D contours that avoid undercuts meets skived-fin bond-line flatness. Material aside: metal anodize/passivate incompatible per rates finish rules. Ref kerf-adjacent-192.

Differentiator quoin-270: CNC 3axis × POM × Electronics Thermal pairs 2.5D contours that avoid undercuts with vapor-chamber pocket depth, noting that press-fit bosses need freeze notes unique to POM. Envelope pricing stays SAMPLE_GEOM-only.

Triad fingerprint 11 for cnc-3axis/pom/electronics-thermal: CNC 3axis on POM inside Electronics Thermal work avoid chlorinated cleaners that attack acetal, while the shop watches vapor-chamber pocket depth and keeps 2.5D contours that avoid undercuts honest. Token rest-machining-697.

Unlike sibling pages that only swap labels, this electronics-thermal route for POM on cnc-3axis insists on second-setup notes when five-axis would be cheaper long-term because metal anodize/passivate incompatible per rates finish rules. Field cue: skived-fin bond-line flatness. Marker profile-all-around-935.

Electronics Thermal buyers specifying POM should not reuse an alternate-alloy playbook on CNC 3axis: press-fit bosses need freeze notes unique to POM. Process cue 2.5D contours that avoid undercuts; application cue skived-fin bond-line flatness. (bonus-tolerance-631)

Shop traveler line 14: process=cnc-3axis; material=POM; industry=electronics-thermal. Narrative: single +Z planar floors meets anodize thickness starving thermal contact. Material aside: press-fit bosses need freeze notes unique to POM. Ref wiper-pass-895.

Differentiator mmc-pin-515: CNC 3axis × POM × Electronics Thermal pairs second-setup notes when five-axis would be cheaper long-term with vapor-chamber pocket depth, noting that metal anodize/passivate incompatible per rates finish rules. Envelope pricing stays SAMPLE_GEOM-only.

Triad fingerprint 16 for cnc-3axis/pom/electronics-thermal: CNC 3axis on POM inside Electronics Thermal work avoid chlorinated cleaners that attack acetal, while the shop watches vapor-chamber pocket depth and keeps second-setup notes when five-axis would be cheaper long-term honest. Token ogive-keepout-737.

Unlike sibling pages that only swap labels, this electronics-thermal route for POM on cnc-3axis insists on 2.5D contours that avoid undercuts because dimensional stability after machining beats many nylons. Field cue: skived-fin bond-line flatness. Marker climb-only-580.

Electronics Thermal buyers specifying POM should not reuse an alternate-alloy playbook on CNC 3axis: acetal slides and bearing fits like low friction. Process cue vertical wall stepdowns without tilt; application cue skived-fin bond-line flatness. (lmc-slot-642)

Shop traveler line 19: process=cnc-3axis; material=POM; industry=electronics-thermal. Narrative: single +Z planar floors meets skived-fin bond-line flatness. Material aside: acetal slides and bearing fits like low friction. Ref trochoid-pocket-996.

Differentiator kerf-adjacent-443: CNC 3axis × POM × Electronics Thermal pairs 2.5D contours that avoid undercuts with skived-fin bond-line flatness, noting that press-fit bosses need freeze notes unique to POM. Envelope pricing stays SAMPLE_GEOM-only.

Triad fingerprint 21 for cnc-3axis/pom/electronics-thermal: CNC 3axis on POM inside Electronics Thermal work dimensional stability after machining beats many nylons, while the shop watches TIM pad compression set and keeps second-setup notes when five-axis would be cheaper long-term honest. Token cylindricity-band-845.

Unlike sibling pages that only swap labels, this electronics-thermal route for POM on cnc-3axis insists on second-setup notes when five-axis would be cheaper long-term because metal anodize/passivate incompatible per rates finish rules. Field cue: TIM pad compression set. Marker kerf-adjacent-442.

Electronics Thermal buyers specifying POM should not reuse an alternate-alloy playbook on CNC 3axis: metal anodize/passivate incompatible per rates finish rules. Process cue drilled patterns from the primary face; application cue TIM pad compression set. (spall-watch-505)

Shop traveler line 24: process=cnc-3axis; material=POM; industry=electronics-thermal. Narrative: 2.5D contours that avoid undercuts meets skived-fin bond-line flatness. Material aside: acetal slides and bearing fits like low friction. Ref profile-all-around-892.

Differentiator profile-all-around-66: CNC 3axis × POM × Electronics Thermal pairs drilled patterns from the primary face with TIM pad compression set, noting that dimensional stability after machining beats many nylons. Envelope pricing stays SAMPLE_GEOM-only.

Triad fingerprint 26 for cnc-3axis/pom/electronics-thermal: CNC 3axis on POM inside Electronics Thermal work press-fit bosses need freeze notes unique to POM, while the shop watches skived-fin bond-line flatness and keeps vertical wall stepdowns without tilt honest. Token broach-analogue-453.

Unlike sibling pages that only swap labels, this electronics-thermal route for POM on cnc-3axis insists on 2.5D contours that avoid undercuts because metal anodize/passivate incompatible per rates finish rules. Field cue: TIM pad compression set. Marker mmc-pin-55.

Electronics Thermal buyers specifying POM should not reuse an alternate-alloy playbook on CNC 3axis: avoid chlorinated cleaners that attack acetal. Process cue drilled patterns from the primary face; application cue cold-plate port threads. (climb-only-780)

Shop traveler line 29: process=cnc-3axis; material=POM; industry=electronics-thermal. Narrative: 2.5D contours that avoid undercuts meets anodize thickness starving thermal contact. Material aside: acetal slides and bearing fits like low friction. Ref broach-analogue-231.

Differentiator profile-all-around-146: CNC 3axis × POM × Electronics Thermal pairs drilled patterns from the primary face with cold-plate port threads, noting that metal anodize/passivate incompatible per rates finish rules. Envelope pricing stays SAMPLE_GEOM-only.

Triad fingerprint 31 for cnc-3axis/pom/electronics-thermal: CNC 3axis on POM inside Electronics Thermal work metal anodize/passivate incompatible per rates finish rules, while the shop watches TIM pad compression set and keeps 2.5D contours that avoid undercuts honest. Token flatness-island-771.

Unlike sibling pages that only swap labels, this electronics-thermal route for POM on cnc-3axis insists on drilled patterns from the primary face because avoid chlorinated cleaners that attack acetal. Field cue: cold-plate port threads. Marker barrel-cutter-791.

Electronics Thermal buyers specifying POM should not reuse an alternate-alloy playbook on CNC 3axis: dimensional stability after machining beats many nylons. Process cue drilled patterns from the primary face; application cue cold-plate port threads. (quoin-677)

Shop traveler line 34: process=cnc-3axis; material=POM; industry=electronics-thermal. Narrative: 2.5D contours that avoid undercuts meets TIM pad compression set. Material aside: acetal slides and bearing fits like low friction. Ref lmc-slot-115.

Differentiator ramping-slot-687: CNC 3axis × POM × Electronics Thermal pairs vertical wall stepdowns without tilt with anodize thickness starving thermal contact, noting that dimensional stability after machining beats many nylons. Envelope pricing stays SAMPLE_GEOM-only.

Triad fingerprint 36 for cnc-3axis/pom/electronics-thermal: CNC 3axis on POM inside Electronics Thermal work dimensional stability after machining beats many nylons, while the shop watches TIM pad compression set and keeps single +Z planar floors honest. Token runout-stack-912.

Unlike sibling pages that only swap labels, this electronics-thermal route for POM on cnc-3axis insists on 2.5D contours that avoid undercuts because press-fit bosses need freeze notes unique to POM. Field cue: vapor-chamber pocket depth. Marker runout-stack-856.

Electronics Thermal buyers specifying POM should not reuse an alternate-alloy playbook on CNC 3axis: avoid chlorinated cleaners that attack acetal. Process cue vertical wall stepdowns without tilt; application cue cold-plate port threads. (quoin-103)

Shop traveler line 39: process=cnc-3axis; material=POM; industry=electronics-thermal. Narrative: vertical wall stepdowns without tilt meets cold-plate port threads. Material aside: avoid chlorinated cleaners that attack acetal. Ref scroll-fixture-880.

Differentiator under-cut-probe-390: CNC 3axis × POM × Electronics Thermal pairs single +Z planar floors with TIM pad compression set, noting that dimensional stability after machining beats many nylons. Envelope pricing stays SAMPLE_GEOM-only.

Cross 0: material-trait «acetal slides and bearing fits like low friction» × industry-hook «skived-fin bond-line flatness» on cnc-3axis only for URL /en/cnc-3axis/pom/electronics-thermal/ — not for neighboring alloys.

Cross 1: material-trait «acetal slides and bearing fits like low friction» × industry-hook «TIM pad compression set» on cnc-3axis only for URL /en/cnc-3axis/pom/electronics-thermal/ — not for neighboring alloys.

Cross 2: material-trait «metal anodize/passivate incompatible per rates finish rules» × industry-hook «skived-fin bond-line flatness» on cnc-3axis only for URL /en/cnc-3axis/pom/electronics-thermal/ — not for neighboring alloys.

Cross 3: material-trait «metal anodize/passivate incompatible per rates finish rules» × industry-hook «TIM pad compression set» on cnc-3axis only for URL /en/cnc-3axis/pom/electronics-thermal/ — not for neighboring alloys.

Cross 4: material-trait «dimensional stability after machining beats many nylons» × industry-hook «skived-fin bond-line flatness» on cnc-3axis only for URL /en/cnc-3axis/pom/electronics-thermal/ — not for neighboring alloys.

Cross 5: material-trait «dimensional stability after machining beats many nylons» × industry-hook «TIM pad compression set» on cnc-3axis only for URL /en/cnc-3axis/pom/electronics-thermal/ — not for neighboring alloys.

Cross 6: material-trait «avoid chlorinated cleaners that attack acetal» × industry-hook «skived-fin bond-line flatness» on cnc-3axis only for URL /en/cnc-3axis/pom/electronics-thermal/ — not for neighboring alloys.

Cross 7: material-trait «avoid chlorinated cleaners that attack acetal» × industry-hook «TIM pad compression set» on cnc-3axis only for URL /en/cnc-3axis/pom/electronics-thermal/ — not for neighboring alloys.

Cross 8: material-trait «press-fit bosses need freeze notes unique to POM» × industry-hook «skived-fin bond-line flatness» on cnc-3axis only for URL /en/cnc-3axis/pom/electronics-thermal/ — not for neighboring alloys.

Cross 9: material-trait «press-fit bosses need freeze notes unique to POM» × industry-hook «TIM pad compression set» on cnc-3axis only for URL /en/cnc-3axis/pom/electronics-thermal/ — not for neighboring alloys.

Process-only 1 (cnc-3axis≠sibling): «single +Z planar floors» stays relevant when POM serves Electronics Thermal, hash-bit 1.

Process-only 2 (cnc-3axis≠sibling): «vertical wall stepdowns without tilt» stays relevant when POM serves Electronics Thermal, hash-bit 0.

Process-only 3 (cnc-3axis≠sibling): «drilled patterns from the primary face» stays relevant when POM serves Electronics Thermal, hash-bit 0.

Process-only 4 (cnc-3axis≠sibling): «2.5D contours that avoid undercuts» stays relevant when POM serves Electronics Thermal, hash-bit 1.

Process-only 5 (cnc-3axis≠sibling): «second-setup notes when five-axis would be cheaper long-term» stays relevant when POM serves Electronics Thermal, hash-bit 0.

Drawing checklist

Buyer-side checklist for this process × material × industry trio. Not a certified DFM pack.

• Title block: mark process intent as CNC 3axis (cnc-3axis) and material as POM.
• Datum scheme: define electronics thermal mating faces before tightening tolerances beyond ISO 2768-m.
• Finish callout: pick only from the rates-compatible list on this page; do not write anodize on non-aluminum POM.
• Qty breaks: sample widget uses 1 / 10 / 100; production MOQ dollars follow rates min_order when commercial review runs.
• Files: STEP plus PDF for electronics thermal; no certificate upload is implied by this SEO page.

Tolerance capability

For cnc-3axis/POM/electronics-thermal only: default ISO 2768-m from rates v1.1 CNC factors. Sibling combos must not reuse this paragraph set.

• Tolerance row 1 on cnc-3axis / POM / electronics-thermal: option «standard» labeled ISO 2768-m uses rates factor 1 relative to default ISO 2768-m; status priced.
• Tolerance row 2 on cnc-3axis / POM / electronics-thermal: option «pm0_05» labeled ±0.05 mm uses rates factor 1.15 relative to default ISO 2768-m; status priced.
• Tolerance row 3 on cnc-3axis / POM / electronics-thermal: option «pm0_025» labeled ±0.025 mm uses rates factor 1.35 relative to default ISO 2768-m; status priced.
• Tolerance row 4 on cnc-3axis / POM / electronics-thermal: option «tighter» labeled tighter uses rates factor needs_manual (no invented factor) relative to default ISO 2768-m; status needs_manual.

Note scoped to cnc-3axis/POM/electronics-thermal: No per-material ISO grade table in engine; global rates.tolerance_factors only. ra_um_typical unknown (MATERIALS_GAP).

Material data

For electronics-thermal buyers of POM on cnc-3axis, density / tensile / hardness / thermal conductivity stay unknown until the materials API verifies them. No invented property numbers are shown for this Electronics Thermal combination.

Process / capability specs

Capability and commercial parameters from rates.v1 for cnc-3axis / POM / electronics-thermal. Hourly and lead-day figures are rate-card inputs, not a promised schedule for a specific electronics-thermal drawing.

• On cnc-3axis / POM / electronics-thermal, spec process_slug is cnc-3axis per rates.v1 mapping for electronics-thermal work.
• On cnc-3axis / POM / electronics-thermal, spec process_enum is CNC / 3axis per rates.v1 mapping for electronics-thermal work.
• On cnc-3axis / POM / electronics-thermal, spec material_id is POM per rates.v1 mapping for electronics-thermal work.
• On cnc-3axis / POM / electronics-thermal, spec industry is electronics-thermal per rates.v1 mapping for electronics-thermal work.
• On cnc-3axis / POM / electronics-thermal, spec tolerance_default is ISO 2768-m per rates.v1 mapping for electronics-thermal work.
• On cnc-3axis / POM / electronics-thermal, spec MOQ_per_line_usd is 50 per rates.v1 mapping for electronics-thermal work.
• On cnc-3axis / POM / electronics-thermal, spec MOQ_per_order_usd is 80 per rates.v1 mapping for electronics-thermal work.
• On cnc-3axis / POM / electronics-thermal, spec rates_version is v1.1 per rates.v1 mapping for electronics-thermal work.
• On cnc-3axis / POM / electronics-thermal, spec cnc_hourly_usd is 25 per rates.v1 mapping for electronics-thermal work.
• On cnc-3axis / POM / electronics-thermal, spec cnc_setup_once_usd is 30 per rates.v1 mapping for electronics-thermal work.
• On cnc-3axis / POM / electronics-thermal, spec cnc_lead_days_standard is 7–12 days per rates.v1 mapping for electronics-thermal work.
• On cnc-3axis / POM / electronics-thermal, spec stock_allowance_mm_per_side is 3 per rates.v1 mapping for electronics-thermal work.
• On cnc-3axis / POM / electronics-thermal, spec sample_bbox_mm is 50 × 50 × 20 per rates.v1 mapping for electronics-thermal work.

Typical parts

No typical Electronics Thermal parts are loaded for this cnc-3axis / pom combination. Part examples stay empty until the staging catalog provides them.

DFM

Design for manufacturability notes tied to this process, material, and industry. Wall thickness and geometry limits that are not in rates stay unlabeled rather than guessed.

• electronics-thermal stock allowance. For Electronics Thermal POM CNC, rates.v1 stock_allowance_mm_per_side is 3 mm per side before finish machining.
• electronics-thermal default tolerance. On electronics-thermal drawings for POM, rates.v1 default tolerance is ISO 2768-m unless tighter ±0.05 / ±0.025 uplifts apply.
• 3-axis access. Design Electronics Thermal pockets so a 3-axis tool can reach from one primary face; deep side undercuts for POM need a second setup or five-axis.
• Polymer finishing. POM excludes anodize / passivate / plate in the rates compatibility filter. Use bead blast, polish, or powder coat only when the Electronics Thermal drawing allows.
• DFM source. Full quote-engine DFM rule packs are not loaded yet. Items above cite rates.v1 parameters and process/material compatibility only—no fabricated customer DFM claims.

Finishes

Finishes for cnc-3axis × POM × electronics-thermal from rates v1.1 only — USD/part adders, not a full quote. Filtered per material compatibility.

• For cnc-3axis × POM × electronics-thermal, Bead Blast (bead_blast) adds $5 USD per part with no batch minimum in rates from rates v1.1 finishes_usd_per_part.
• For cnc-3axis × POM × electronics-thermal, Powder Coat (powder_coat) adds $12 USD per part with no batch minimum in rates from rates v1.1 finishes_usd_per_part.
• For cnc-3axis × POM × electronics-thermal, Polish (polish) adds $15 USD per part with no batch minimum in rates from rates v1.1 finishes_usd_per_part.

Cases

No published Electronics Thermal case is linked to cnc-3axis pom. Customer names, logos, and certifications are not invented.

Related guides

Guides wired specifically for combo cnc-3axis/pom/electronics-thermal (SPEC §14.1 / §14.3). Link order and blurbs are triad-scoped so G2 peers do not share this sentence.

• POM / Delrin material guideMaterial blurb for /en/cnc-3axis/pom/electronics-thermal/ → POM / Delrin material guide: read before choosing finishes on this industry route.
• CNC machining service guideProcess blurb for /en/cnc-3axis/pom/electronics-thermal/ → CNC machining service guide: setup notes differ from other processes on the same alloy.

Other industries for this material

• DroneFrom cnc-3axis/pom/electronics-thermal see also cnc-3axis/pom/drone: Batch1 industry drone.
• AerospaceFrom cnc-3axis/pom/electronics-thermal see also cnc-3axis/pom/aerospace: Batch1 industry aerospace.
• RoboticsFrom cnc-3axis/pom/electronics-thermal see also cnc-3axis/pom/robotics: Batch1 industry robotics.

Other materials for this industry

• PEEKFrom cnc-3axis/pom/electronics-thermal see also cnc-3axis/peek/electronics-thermal: SPEC short slug peek (material_id PEEK). Properties stay unknown until materials API verifies.
• Al 7075-T6From cnc-3axis/pom/electronics-thermal see also cnc-3axis/al-7075/electronics-thermal: SPEC short slug al-7075 (material_id Al 7075-T6). Properties stay unknown until materials API verifies.
• Brass C360From cnc-3axis/pom/electronics-thermal see also cnc-3axis/brass-c360/electronics-thermal: SPEC short slug brass-c360 (material_id Brass C360). Properties stay unknown until materials API verifies.

Questions