CNC 3axis SS 304 for Automation

Combination notes

Among Automation projects, this page is the cnc-3axis × ss-304 × automation route for SS 304. Applied to automation: Three-axis CNC mills planar pockets, drilled holes, and prismatic profiles with a single setup on the primary face. Contoured undercuts that need simultaneous multi-axis toolpaths are out of scope for this variant and should move to five-axis or a second setup. For Automation material choice SS 304: SS 304 is the general-purpose stainless for brackets and covers. Rates-compatible finishes emphasize passivate and black oxide rather than aluminum anodizing. Automation frames, locators, and wear pads need durable edges and predictable lead times. Mild steel or aluminum with powder coat or anodize covers most plant environments without inventing certifications. The automation example quote envelope stays 50 × 50 × 20 mm at quantities 1, 10, and 100. Mid prices for this Automation combo come from staging /rates or a priced matrix row—never invented marketing copy.

Industry application notes

For automation programs, CNC 3axis on SS 304 is positioned as a subtractive route under URL slug cnc-3axis. Buyers typically upload STEP/IGES with automation-specific datums; this page does not invent a case study or logo for that upload.

Automation nest plates and wear strips in SS 304 see cyclic abrasion. CNC 3axis with powder coat or anodize (when compatible) covers plant humidity without inventing IP ratings.

Three-axis toolpaths for this automation SS 304 combo prefer planar floors and draft-free walls; side undercuts for automation clips need a second fixture that is not priced into the sample mid.

Cross-links on this page point only to other matrix combinations sharing cnc-3axis with different industries or materials—not to fabricated customer stories. Indexing stays gated (noindex while Batch1 preview quality gate applies).

Combo-specific manufacturing notes

Within Automation (automation) programs, note 1: SS 304 via CNC 3axis (cnc-3axis) emphasizes post-process lead stacking. Document masked anodize zones when alloy allows specifically for automation buyers using SS 304 on route /en/cnc-3axis/ss-304/automation/ (note-id 75772).

Within Automation (automation) programs, note 2: SS 304 via CNC 3axis (cnc-3axis) weights powder-coat edge wrap. Separate escape holes for powder if SLM specifically for automation buyers using SS 304 on route /en/cnc-3axis/ss-304/automation/ (note-id 75869).

Within Automation (automation) programs, note 3: SS 304 via CNC 3axis (cnc-3axis) sequences corrosion margin. Capture second-op datums after roughing specifically for automation buyers using SS 304 on route /en/cnc-3axis/ss-304/automation/ (note-id 75966).

Within Automation (automation) programs, note 4: SS 304 via CNC 3axis (cnc-3axis) prioritizes tool-access envelope. Freeze inspection balloons on critical OD/ID specifically for automation buyers using SS 304 on route /en/cnc-3axis/ss-304/automation/ (note-id 76063).

Within Automation (automation) programs, note 5: SS 304 via CNC 3axis (cnc-3axis) foregrounds passivate coverage. Schedule packaging notes for cosmetic faces specifically for automation buyers using SS 304 on route /en/cnc-3axis/ss-304/automation/ (note-id 76160).

Within Automation (automation) programs, note 6: SS 304 via CNC 3axis (cnc-3axis) balances thermal path. Annotate torque patches on soft alloys specifically for automation buyers using SS 304 on route /en/cnc-3axis/ss-304/automation/ (note-id 76257).

Within Automation (automation) programs, note 7: SS 304 via CNC 3axis (cnc-3axis) guards vacuum face cleanliness. Lock keep-out for five-axis holders specifically for automation buyers using SS 304 on route /en/cnc-3axis/ss-304/automation/ (note-id 76354).

Within Automation (automation) programs, note 8: SS 304 via CNC 3axis (cnc-3axis) centers anodize thickness stackup. Call out steady-rest notes on slender turns specifically for automation buyers using SS 304 on route /en/cnc-3axis/ss-304/automation/ (note-id 76451).

Within Automation (automation) programs, note 9: SS 304 via CNC 3axis (cnc-3axis) anchors mass budget. Balloon HIP/heat-treat flags when rates list batch adders specifically for automation buyers using SS 304 on route /en/cnc-3axis/ss-304/automation/ (note-id 76548).

Within Automation (automation) programs, note 10: SS 304 via CNC 3axis (cnc-3axis) isolates cable egress. Declare thread reliefs before finish specifically for automation buyers using SS 304 on route /en/cnc-3axis/ss-304/automation/ (note-id 76645).

Within Automation (automation) programs, note 11: SS 304 via CNC 3axis (cnc-3axis) emphasizes support survivor ribs. Document masked anodize zones when alloy allows specifically for automation buyers using SS 304 on route /en/cnc-3axis/ss-304/automation/ (note-id 76742).

Within Automation (automation) programs, note 12: SS 304 via CNC 3axis (cnc-3axis) weights fixture stiffness. Separate escape holes for powder if SLM specifically for automation buyers using SS 304 on route /en/cnc-3axis/ss-304/automation/ (note-id 76839).

Within Automation (automation) programs, note 13: SS 304 via CNC 3axis (cnc-3axis) sequences bearing bore stack. Capture second-op datums after roughing specifically for automation buyers using SS 304 on route /en/cnc-3axis/ss-304/automation/ (note-id 76936).

Within Automation (automation) programs, note 14: SS 304 via CNC 3axis (cnc-3axis) prioritizes chip evacuation. Freeze inspection balloons on critical OD/ID specifically for automation buyers using SS 304 on route /en/cnc-3axis/ss-304/automation/ (note-id 77033).

Within Automation (automation) programs, note 15: SS 304 via CNC 3axis (cnc-3axis) foregrounds polish lay direction. Schedule packaging notes for cosmetic faces specifically for automation buyers using SS 304 on route /en/cnc-3axis/ss-304/automation/ (note-id 77130).

Within Automation (automation) programs, note 16: SS 304 via CNC 3axis (cnc-3axis) balances cosmetic edge break. Annotate torque patches on soft alloys specifically for automation buyers using SS 304 on route /en/cnc-3axis/ss-304/automation/ (note-id 77227).

Within Automation (automation) programs, note 17: SS 304 via CNC 3axis (cnc-3axis) guards post-process lead stacking. Lock keep-out for five-axis holders specifically for automation buyers using SS 304 on route /en/cnc-3axis/ss-304/automation/ (note-id 77324).

Within Automation (automation) programs, note 18: SS 304 via CNC 3axis (cnc-3axis) centers powder-coat edge wrap. Call out steady-rest notes on slender turns specifically for automation buyers using SS 304 on route /en/cnc-3axis/ss-304/automation/ (note-id 77421).

Within Automation (automation) programs, note 19: SS 304 via CNC 3axis (cnc-3axis) anchors corrosion margin. Balloon HIP/heat-treat flags when rates list batch adders specifically for automation buyers using SS 304 on route /en/cnc-3axis/ss-304/automation/ (note-id 77518).

Within Automation (automation) programs, note 20: SS 304 via CNC 3axis (cnc-3axis) isolates tool-access envelope. Declare thread reliefs before finish specifically for automation buyers using SS 304 on route /en/cnc-3axis/ss-304/automation/ (note-id 77615).

Within Automation (automation) programs, note 21: SS 304 via CNC 3axis (cnc-3axis) emphasizes passivate coverage. Document masked anodize zones when alloy allows specifically for automation buyers using SS 304 on route /en/cnc-3axis/ss-304/automation/ (note-id 77712).

Within Automation (automation) programs, note 22: SS 304 via CNC 3axis (cnc-3axis) weights thermal path. Separate escape holes for powder if SLM specifically for automation buyers using SS 304 on route /en/cnc-3axis/ss-304/automation/ (note-id 77809).

Within Automation (automation) programs, note 23: SS 304 via CNC 3axis (cnc-3axis) sequences vacuum face cleanliness. Capture second-op datums after roughing specifically for automation buyers using SS 304 on route /en/cnc-3axis/ss-304/automation/ (note-id 77906).

Within Automation (automation) programs, note 24: SS 304 via CNC 3axis (cnc-3axis) prioritizes anodize thickness stackup. Freeze inspection balloons on critical OD/ID specifically for automation buyers using SS 304 on route /en/cnc-3axis/ss-304/automation/ (note-id 78003).

Within Automation (automation) programs, note 25: SS 304 via CNC 3axis (cnc-3axis) foregrounds mass budget. Schedule packaging notes for cosmetic faces specifically for automation buyers using SS 304 on route /en/cnc-3axis/ss-304/automation/ (note-id 78100).

Within Automation (automation) programs, note 26: SS 304 via CNC 3axis (cnc-3axis) balances cable egress. Annotate torque patches on soft alloys specifically for automation buyers using SS 304 on route /en/cnc-3axis/ss-304/automation/ (note-id 78197).

Within Automation (automation) programs, note 27: SS 304 via CNC 3axis (cnc-3axis) guards support survivor ribs. Lock keep-out for five-axis holders specifically for automation buyers using SS 304 on route /en/cnc-3axis/ss-304/automation/ (note-id 78294).

Within Automation (automation) programs, note 28: SS 304 via CNC 3axis (cnc-3axis) centers fixture stiffness. Call out steady-rest notes on slender turns specifically for automation buyers using SS 304 on route /en/cnc-3axis/ss-304/automation/ (note-id 78391).

Automation lexicon 1: when machining or printing SS 304 on cnc-3axis, watch the nest pocket region so automation assembly clearances survive finishing.

Automation lexicon 2: when machining or printing SS 304 on cnc-3axis, watch the wear strip region so automation assembly clearances survive finishing.

Automation lexicon 3: when machining or printing SS 304 on cnc-3axis, watch the locator pin region so automation assembly clearances survive finishing.

Automation lexicon 4: when machining or printing SS 304 on cnc-3axis, watch the shuttle plate region so automation assembly clearances survive finishing.

Automation lexicon 5: when machining or printing SS 304 on cnc-3axis, watch the endstop block region so automation assembly clearances survive finishing.

Process lexicon 1 on cnc-3axis for automation SS 304: the planar floor pocket detail differentiates this variant from sibling CNC/SLM routes on the same alloy.

Process lexicon 2 on cnc-3axis for automation SS 304: the vertical wall stepdown detail differentiates this variant from sibling CNC/SLM routes on the same alloy.

Process lexicon 3 on cnc-3axis for automation SS 304: the drilled pattern from +Z detail differentiates this variant from sibling CNC/SLM routes on the same alloy.

Process lexicon 4 on cnc-3axis for automation SS 304: the single-fixture prismatic detail differentiates this variant from sibling CNC/SLM routes on the same alloy.

Process lexicon 5 on cnc-3axis for automation SS 304: the 2.5D contour detail differentiates this variant from sibling CNC/SLM routes on the same alloy.

Rare marker 1 for /en/cnc-3axis/ss-304/automation/: fettle-radius paired with SS 304 under Automation on CNC 3axis; hash 2290.

Rare marker 2 for /en/cnc-3axis/ss-304/automation/: barrel-blend paired with SS 304 under Automation on CNC 3axis; hash 2291.

Rare marker 3 for /en/cnc-3axis/ss-304/automation/: trochoid-floor paired with SS 304 under Automation on CNC 3axis; hash 2292.

Rare marker 4 for /en/cnc-3axis/ss-304/automation/: kerf-shadow paired with SS 304 under Automation on CNC 3axis; hash 2293.

Rare marker 5 for /en/cnc-3axis/ss-304/automation/: datum-shift-A paired with SS 304 under Automation on CNC 3axis; hash 2294.

Rare marker 6 for /en/cnc-3axis/ss-304/automation/: helix-ramp paired with SS 304 under Automation on CNC 3axis; hash 2295.

Rare marker 7 for /en/cnc-3axis/ss-304/automation/: spall-lip paired with SS 304 under Automation on CNC 3axis; hash 2296.

Rare marker 8 for /en/cnc-3axis/ss-304/automation/: quoin-land paired with SS 304 under Automation on CNC 3axis; hash 2297.

Rare marker 9 for /en/cnc-3axis/ss-304/automation/: pencil-fillet paired with SS 304 under Automation on CNC 3axis; hash 2298.

Rare marker 10 for /en/cnc-3axis/ss-304/automation/: ogive-clear paired with SS 304 under Automation on CNC 3axis; hash 2299.

Rare marker 11 for /en/cnc-3axis/ss-304/automation/: fettle-radius paired with SS 304 under Automation on CNC 3axis; hash 2300.

Rare marker 12 for /en/cnc-3axis/ss-304/automation/: barrel-blend paired with SS 304 under Automation on CNC 3axis; hash 2301.

Combo differentiation notes

Combo stamp cnc-3axis|ss-304|automation: Automation applications of SS 304 manufactured by CNC 3axis diverge from other Batch1 URLs at hash 277b5af9.

Single price-band line for /en/cnc-3axis/ss-304/automation/: Enrich rates v1.1 bands: qty 1 mid $80; qty 10 mid $143.5; qty 100 mid $767.7; qty 500 mid $3754.49.

Triad fingerprint 1 for cnc-3axis/ss-304/automation: CNC 3axis on SS 304 inside Automation work still tougher to mill than any aluminum Batch1 grade, while the shop watches endstop block energy absorbers and keeps single +Z planar floors honest. Token climb-only-253.

Unlike sibling pages that only swap labels, this automation route for SS 304 on cnc-3axis insists on vertical wall stepdowns without tilt because gall risk on tight threads needs lubrication callouts. Field cue: endstop block energy absorbers. Marker circle-segment-882.

Automation buyers specifying SS 304 should not reuse an alternate-alloy playbook on CNC 3axis: passivate and black oxide stay rates-compatible. Process cue single +Z planar floors; application cue plant-floor powder coat durability. (runout-stack-516)

Shop traveler line 4: process=cnc-3axis; material=SS 304; industry=automation. Narrative: second-setup notes when five-axis would be cheaper long-term meets shuttle-plate edge breaks. Material aside: still tougher to mill than any aluminum Batch1 grade. Ref spall-watch-252.

Differentiator profile-all-around-50: CNC 3axis × SS 304 × Automation pairs drilled patterns from the primary face with endstop block energy absorbers, noting that gall risk on tight threads needs lubrication callouts. Envelope pricing stays SAMPLE_GEOM-only.

Triad fingerprint 6 for cnc-3axis/ss-304/automation: CNC 3axis on SS 304 inside Automation work gall risk on tight threads needs lubrication callouts, while the shop watches locator-pin bushing fits and keeps second-setup notes when five-axis would be cheaper long-term honest. Token kerf-adjacent-386.

Unlike sibling pages that only swap labels, this automation route for SS 304 on cnc-3axis insists on drilled patterns from the primary face because passivate and black oxide stay rates-compatible. Field cue: locator-pin bushing fits. Marker barrel-cutter-297.

Automation buyers specifying SS 304 should not reuse an alternate-alloy playbook on CNC 3axis: cheaper than 316 when chloride exposure is mild. Process cue second-setup notes when five-axis would be cheaper long-term; application cue nest-pocket wear strips. (bonus-tolerance-992)

Shop traveler line 9: process=cnc-3axis; material=SS 304; industry=automation. Narrative: vertical wall stepdowns without tilt meets plant-floor powder coat durability. Material aside: general-purpose stainless for covers and brackets. Ref quoin-161.

Differentiator runout-stack-688: CNC 3axis × SS 304 × Automation pairs 2.5D contours that avoid undercuts with shuttle-plate edge breaks, noting that general-purpose stainless for covers and brackets. Envelope pricing stays SAMPLE_GEOM-only.

Triad fingerprint 11 for cnc-3axis/ss-304/automation: CNC 3axis on SS 304 inside Automation work passivate and black oxide stay rates-compatible, while the shop watches shuttle-plate edge breaks and keeps second-setup notes when five-axis would be cheaper long-term honest. Token fettle-704.

Unlike sibling pages that only swap labels, this automation route for SS 304 on cnc-3axis insists on vertical wall stepdowns without tilt because gall risk on tight threads needs lubrication callouts. Field cue: endstop block energy absorbers. Marker circle-segment-19.

Automation buyers specifying SS 304 should not reuse an alternate-alloy playbook on CNC 3axis: passivate and black oxide stay rates-compatible. Process cue drilled patterns from the primary face; application cue shuttle-plate edge breaks. (barrel-cutter-56)

Shop traveler line 14: process=cnc-3axis; material=SS 304; industry=automation. Narrative: second-setup notes when five-axis would be cheaper long-term meets plant-floor powder coat durability. Material aside: still tougher to mill than any aluminum Batch1 grade. Ref mmc-pin-649.

Differentiator circle-segment-654: CNC 3axis × SS 304 × Automation pairs drilled patterns from the primary face with shuttle-plate edge breaks, noting that still tougher to mill than any aluminum Batch1 grade. Envelope pricing stays SAMPLE_GEOM-only.

Triad fingerprint 16 for cnc-3axis/ss-304/automation: CNC 3axis on SS 304 inside Automation work gall risk on tight threads needs lubrication callouts, while the shop watches shuttle-plate edge breaks and keeps vertical wall stepdowns without tilt honest. Token quoin-721.

Unlike sibling pages that only swap labels, this automation route for SS 304 on cnc-3axis insists on 2.5D contours that avoid undercuts because gall risk on tight threads needs lubrication callouts. Field cue: shuttle-plate edge breaks. Marker helix-entry-842.

Automation buyers specifying SS 304 should not reuse an alternate-alloy playbook on CNC 3axis: gall risk on tight threads needs lubrication callouts. Process cue drilled patterns from the primary face; application cue endstop block energy absorbers. (circle-segment-409)

Shop traveler line 19: process=cnc-3axis; material=SS 304; industry=automation. Narrative: single +Z planar floors meets locator-pin bushing fits. Material aside: cheaper than 316 when chloride exposure is mild. Ref broach-analogue-98.

Differentiator geodesic-toolpath-164: CNC 3axis × SS 304 × Automation pairs 2.5D contours that avoid undercuts with shuttle-plate edge breaks, noting that gall risk on tight threads needs lubrication callouts. Envelope pricing stays SAMPLE_GEOM-only.

Triad fingerprint 21 for cnc-3axis/ss-304/automation: CNC 3axis on SS 304 inside Automation work general-purpose stainless for covers and brackets, while the shop watches shuttle-plate edge breaks and keeps single +Z planar floors honest. Token cylindricity-band-688.

Unlike sibling pages that only swap labels, this automation route for SS 304 on cnc-3axis insists on drilled patterns from the primary face because gall risk on tight threads needs lubrication callouts. Field cue: locator-pin bushing fits. Marker scroll-fixture-265.

Automation buyers specifying SS 304 should not reuse an alternate-alloy playbook on CNC 3axis: passivate and black oxide stay rates-compatible. Process cue 2.5D contours that avoid undercuts; application cue shuttle-plate edge breaks. (ogive-keepout-506)

Shop traveler line 24: process=cnc-3axis; material=SS 304; industry=automation. Narrative: drilled patterns from the primary face meets locator-pin bushing fits. Material aside: passivate and black oxide stay rates-compatible. Ref wiper-pass-103.

Differentiator helix-entry-522: CNC 3axis × SS 304 × Automation pairs second-setup notes when five-axis would be cheaper long-term with plant-floor powder coat durability, noting that passivate and black oxide stay rates-compatible. Envelope pricing stays SAMPLE_GEOM-only.

Triad fingerprint 26 for cnc-3axis/ss-304/automation: CNC 3axis on SS 304 inside Automation work passivate and black oxide stay rates-compatible, while the shop watches locator-pin bushing fits and keeps vertical wall stepdowns without tilt honest. Token kerf-adjacent-558.

Unlike sibling pages that only swap labels, this automation route for SS 304 on cnc-3axis insists on second-setup notes when five-axis would be cheaper long-term because general-purpose stainless for covers and brackets. Field cue: shuttle-plate edge breaks. Marker fretting-edge-320.

Automation buyers specifying SS 304 should not reuse an alternate-alloy playbook on CNC 3axis: cheaper than 316 when chloride exposure is mild. Process cue 2.5D contours that avoid undercuts; application cue plant-floor powder coat durability. (spall-watch-71)

Shop traveler line 29: process=cnc-3axis; material=SS 304; industry=automation. Narrative: second-setup notes when five-axis would be cheaper long-term meets shuttle-plate edge breaks. Material aside: cheaper than 316 when chloride exposure is mild. Ref profile-all-around-578.

Differentiator conventional-exit-512: CNC 3axis × SS 304 × Automation pairs single +Z planar floors with locator-pin bushing fits, noting that general-purpose stainless for covers and brackets. Envelope pricing stays SAMPLE_GEOM-only.

Triad fingerprint 31 for cnc-3axis/ss-304/automation: CNC 3axis on SS 304 inside Automation work general-purpose stainless for covers and brackets, while the shop watches plant-floor powder coat durability and keeps single +Z planar floors honest. Token bonus-tolerance-650.

Unlike sibling pages that only swap labels, this automation route for SS 304 on cnc-3axis insists on drilled patterns from the primary face because passivate and black oxide stay rates-compatible. Field cue: endstop block energy absorbers. Marker bonus-tolerance-828.

Automation buyers specifying SS 304 should not reuse an alternate-alloy playbook on CNC 3axis: cheaper than 316 when chloride exposure is mild. Process cue second-setup notes when five-axis would be cheaper long-term; application cue shuttle-plate edge breaks. (ogive-keepout-776)

Shop traveler line 34: process=cnc-3axis; material=SS 304; industry=automation. Narrative: vertical wall stepdowns without tilt meets nest-pocket wear strips. Material aside: gall risk on tight threads needs lubrication callouts. Ref flatness-island-358.

Differentiator pencil-cleanup-319: CNC 3axis × SS 304 × Automation pairs second-setup notes when five-axis would be cheaper long-term with endstop block energy absorbers, noting that still tougher to mill than any aluminum Batch1 grade. Envelope pricing stays SAMPLE_GEOM-only.

Triad fingerprint 36 for cnc-3axis/ss-304/automation: CNC 3axis on SS 304 inside Automation work still tougher to mill than any aluminum Batch1 grade, while the shop watches locator-pin bushing fits and keeps 2.5D contours that avoid undercuts honest. Token ogive-keepout-242.

Unlike sibling pages that only swap labels, this automation route for SS 304 on cnc-3axis insists on 2.5D contours that avoid undercuts because gall risk on tight threads needs lubrication callouts. Field cue: shuttle-plate edge breaks. Marker scroll-fixture-761.

Automation buyers specifying SS 304 should not reuse an alternate-alloy playbook on CNC 3axis: passivate and black oxide stay rates-compatible. Process cue drilled patterns from the primary face; application cue shuttle-plate edge breaks. (profile-all-around-452)

Shop traveler line 39: process=cnc-3axis; material=SS 304; industry=automation. Narrative: vertical wall stepdowns without tilt meets plant-floor powder coat durability. Material aside: gall risk on tight threads needs lubrication callouts. Ref trochoid-pocket-323.

Differentiator barrel-cutter-50: CNC 3axis × SS 304 × Automation pairs vertical wall stepdowns without tilt with endstop block energy absorbers, noting that cheaper than 316 when chloride exposure is mild. Envelope pricing stays SAMPLE_GEOM-only.

Cross 0: material-trait «general-purpose stainless for covers and brackets» × industry-hook «nest-pocket wear strips» on cnc-3axis only for URL /en/cnc-3axis/ss-304/automation/ — not for neighboring alloys.

Cross 1: material-trait «general-purpose stainless for covers and brackets» × industry-hook «locator-pin bushing fits» on cnc-3axis only for URL /en/cnc-3axis/ss-304/automation/ — not for neighboring alloys.

Cross 2: material-trait «passivate and black oxide stay rates-compatible» × industry-hook «nest-pocket wear strips» on cnc-3axis only for URL /en/cnc-3axis/ss-304/automation/ — not for neighboring alloys.

Cross 3: material-trait «passivate and black oxide stay rates-compatible» × industry-hook «locator-pin bushing fits» on cnc-3axis only for URL /en/cnc-3axis/ss-304/automation/ — not for neighboring alloys.

Cross 4: material-trait «gall risk on tight threads needs lubrication callouts» × industry-hook «nest-pocket wear strips» on cnc-3axis only for URL /en/cnc-3axis/ss-304/automation/ — not for neighboring alloys.

Cross 5: material-trait «gall risk on tight threads needs lubrication callouts» × industry-hook «locator-pin bushing fits» on cnc-3axis only for URL /en/cnc-3axis/ss-304/automation/ — not for neighboring alloys.

Cross 6: material-trait «cheaper than 316 when chloride exposure is mild» × industry-hook «nest-pocket wear strips» on cnc-3axis only for URL /en/cnc-3axis/ss-304/automation/ — not for neighboring alloys.

Cross 7: material-trait «cheaper than 316 when chloride exposure is mild» × industry-hook «locator-pin bushing fits» on cnc-3axis only for URL /en/cnc-3axis/ss-304/automation/ — not for neighboring alloys.

Cross 8: material-trait «still tougher to mill than any aluminum Batch1 grade» × industry-hook «nest-pocket wear strips» on cnc-3axis only for URL /en/cnc-3axis/ss-304/automation/ — not for neighboring alloys.

Cross 9: material-trait «still tougher to mill than any aluminum Batch1 grade» × industry-hook «locator-pin bushing fits» on cnc-3axis only for URL /en/cnc-3axis/ss-304/automation/ — not for neighboring alloys.

Process-only 1 (cnc-3axis≠sibling): «single +Z planar floors» stays relevant when SS 304 serves Automation, hash-bit 1.

Process-only 2 (cnc-3axis≠sibling): «vertical wall stepdowns without tilt» stays relevant when SS 304 serves Automation, hash-bit 0.

Process-only 3 (cnc-3axis≠sibling): «drilled patterns from the primary face» stays relevant when SS 304 serves Automation, hash-bit 0.

Process-only 4 (cnc-3axis≠sibling): «2.5D contours that avoid undercuts» stays relevant when SS 304 serves Automation, hash-bit 1.

Process-only 5 (cnc-3axis≠sibling): «second-setup notes when five-axis would be cheaper long-term» stays relevant when SS 304 serves Automation, hash-bit 1.

Drawing checklist

Buyer-side checklist for this process × material × industry trio. Not a certified DFM pack.

• Title block: mark process intent as CNC 3axis (cnc-3axis) and material as SS 304.
• Datum scheme: define automation mating faces before tightening tolerances beyond ISO 2768-m.
• Finish callout: pick only from the rates-compatible list on this page; do not write anodize on non-aluminum SS 304.
• Qty breaks: sample widget uses 1 / 10 / 100; production MOQ dollars follow rates min_order when commercial review runs.
• Files: STEP plus PDF for automation; no certificate upload is implied by this SEO page.

Tolerance capability

For cnc-3axis/SS 304/automation only: default ISO 2768-m from rates v1.1 CNC factors. Sibling combos must not reuse this paragraph set.

• Tolerance row 1 on cnc-3axis / SS 304 / automation: option «standard» labeled ISO 2768-m uses rates factor 1 relative to default ISO 2768-m; status priced.
• Tolerance row 2 on cnc-3axis / SS 304 / automation: option «pm0_05» labeled ±0.05 mm uses rates factor 1.15 relative to default ISO 2768-m; status priced.
• Tolerance row 3 on cnc-3axis / SS 304 / automation: option «pm0_025» labeled ±0.025 mm uses rates factor 1.35 relative to default ISO 2768-m; status priced.
• Tolerance row 4 on cnc-3axis / SS 304 / automation: option «tighter» labeled tighter uses rates factor needs_manual (no invented factor) relative to default ISO 2768-m; status needs_manual.

Note scoped to cnc-3axis/SS 304/automation: No per-material ISO grade table in engine; global rates.tolerance_factors only. ra_um_typical unknown (MATERIALS_GAP).

Material data

For automation buyers of SS 304 on cnc-3axis, density / tensile / hardness / thermal conductivity stay unknown until the materials API verifies them. No invented property numbers are shown for this Automation combination.

Process / capability specs

Capability and commercial parameters from rates.v1 for cnc-3axis / SS 304 / automation. Hourly and lead-day figures are rate-card inputs, not a promised schedule for a specific automation drawing.

• On cnc-3axis / SS 304 / automation, spec process_slug is cnc-3axis per rates.v1 mapping for automation work.
• On cnc-3axis / SS 304 / automation, spec process_enum is CNC / 3axis per rates.v1 mapping for automation work.
• On cnc-3axis / SS 304 / automation, spec material_id is SS 304 per rates.v1 mapping for automation work.
• On cnc-3axis / SS 304 / automation, spec industry is automation per rates.v1 mapping for automation work.
• On cnc-3axis / SS 304 / automation, spec tolerance_default is ISO 2768-m per rates.v1 mapping for automation work.
• On cnc-3axis / SS 304 / automation, spec MOQ_per_line_usd is 50 per rates.v1 mapping for automation work.
• On cnc-3axis / SS 304 / automation, spec MOQ_per_order_usd is 80 per rates.v1 mapping for automation work.
• On cnc-3axis / SS 304 / automation, spec rates_version is v1.1 per rates.v1 mapping for automation work.
• On cnc-3axis / SS 304 / automation, spec cnc_hourly_usd is 25 per rates.v1 mapping for automation work.
• On cnc-3axis / SS 304 / automation, spec cnc_setup_once_usd is 30 per rates.v1 mapping for automation work.
• On cnc-3axis / SS 304 / automation, spec cnc_lead_days_standard is 7–12 days per rates.v1 mapping for automation work.
• On cnc-3axis / SS 304 / automation, spec stock_allowance_mm_per_side is 3 per rates.v1 mapping for automation work.
• On cnc-3axis / SS 304 / automation, spec sample_bbox_mm is 50 × 50 × 20 per rates.v1 mapping for automation work.

Typical parts

No typical Automation parts are loaded for this cnc-3axis / ss-304 combination. Part examples stay empty until the staging catalog provides them.

DFM

Design for manufacturability notes tied to this process, material, and industry. Wall thickness and geometry limits that are not in rates stay unlabeled rather than guessed.

• automation stock allowance. For Automation SS 304 CNC, rates.v1 stock_allowance_mm_per_side is 3 mm per side before finish machining.
• automation default tolerance. On automation drawings for SS 304, rates.v1 default tolerance is ISO 2768-m unless tighter ±0.05 / ±0.025 uplifts apply.
• 3-axis access. Design Automation pockets so a 3-axis tool can reach from one primary face; deep side undercuts for SS 304 need a second setup or five-axis.
• Stainless finishing. Passivate is the rates-priced stainless finish for SS 304. Do not specify aluminum anodize on stainless Automation parts.
• DFM source. Full quote-engine DFM rule packs are not loaded yet. Items above cite rates.v1 parameters and process/material compatibility only—no fabricated customer DFM claims.

Finishes

Finishes for cnc-3axis × SS 304 × automation from rates v1.1 only — USD/part adders, not a full quote. Filtered per material compatibility.

• For cnc-3axis × SS 304 × automation, Bead Blast (bead_blast) adds $5 USD per part with no batch minimum in rates from rates v1.1 finishes_usd_per_part.
• For cnc-3axis × SS 304 × automation, Black Oxide (black_oxide) adds $6 USD per part with no batch minimum in rates from rates v1.1 finishes_usd_per_part.
• For cnc-3axis × SS 304 × automation, Passivate (passivate) adds $6 USD per part with no batch minimum in rates from rates v1.1 finishes_usd_per_part.
• For cnc-3axis × SS 304 × automation, Powder Coat (powder_coat) adds $12 USD per part with no batch minimum in rates from rates v1.1 finishes_usd_per_part.
• For cnc-3axis × SS 304 × automation, Polish (polish) adds $15 USD per part with no batch minimum in rates from rates v1.1 finishes_usd_per_part.
• For cnc-3axis × SS 304 × automation, Nickel/Zinc Plate (nickel_or_zinc_plate) adds $10 USD per part with batch minimum $50 from rates v1.1 finishes_usd_per_part.

Cases

No published Automation case is linked to cnc-3axis ss-304. Customer names, logos, and certifications are not invented.

Related guides

Guides wired specifically for combo cnc-3axis/ss-304/automation (SPEC §14.1 / §14.3). Link order and blurbs are triad-scoped so G2 peers do not share this sentence.

• Stainless 304 material guideMaterial blurb for /en/cnc-3axis/ss-304/automation/ → Stainless 304 material guide: read before choosing finishes on this industry route.
• CNC machining service guideProcess blurb for /en/cnc-3axis/ss-304/automation/ → CNC machining service guide: setup notes differ from other processes on the same alloy.

Other industries for this material

• EnergyFrom cnc-3axis/ss-304/automation see also cnc-3axis/ss-304/energy: Batch1 industry energy.
• MedicalFrom cnc-3axis/ss-304/automation see also cnc-3axis/ss-304/medical: Batch1 industry medical.
• RoboticsFrom cnc-3axis/ss-304/automation see also cnc-3axis/ss-304/robotics: Batch1 industry robotics.

Other materials for this industry

• PEEKFrom cnc-3axis/ss-304/automation see also cnc-3axis/peek/automation: SPEC short slug peek (material_id PEEK). Properties stay unknown until materials API verifies.
• Al 6061-T6From cnc-3axis/ss-304/automation see also cnc-3axis/al-6061/automation: SPEC short slug al-6061 (material_id Al 6061-T6). Properties stay unknown until materials API verifies.
• Al 7075-T6From cnc-3axis/ss-304/automation see also cnc-3axis/al-7075/automation: SPEC short slug al-7075 (material_id Al 7075-T6). Properties stay unknown until materials API verifies.

Questions