CNC 3axis SS 304 for Robotics

Combination notes

Among Robotics projects, this page is the cnc-3axis × ss-304 × robotics route for SS 304. Applied to robotics: Three-axis CNC mills planar pockets, drilled holes, and prismatic profiles with a single setup on the primary face. Contoured undercuts that need simultaneous multi-axis toolpaths are out of scope for this variant and should move to five-axis or a second setup. For Robotics material choice SS 304: SS 304 is the general-purpose stainless for brackets and covers. Rates-compatible finishes emphasize passivate and black oxide rather than aluminum anodizing. Robotics end-effectors and gearbox housings mix stiffness with cable clearances. Five-axis or turning helps concentric bearing bores; aluminum anodize improves wear on sliding covers when the material is aluminum. The robotics example quote envelope stays 50 × 50 × 20 mm at quantities 1, 10, and 100. Mid prices for this Robotics combo come from staging /rates or a priced matrix row—never invented marketing copy.

Industry application notes

For robotics programs, CNC 3axis on SS 304 is positioned as a subtractive route under URL slug cnc-3axis. Buyers typically upload STEP/IGES with robotics-specific datums; this page does not invent a case study or logo for that upload.

Robotics wrist housings and reducer adapters in SS 304 mix bearing bores with cable labyrinths. CNC 3axis helps when the robotics CAD keeps tool access honest; harmonic-drive interfaces must come from the customer model.

Three-axis toolpaths for this robotics SS 304 combo prefer planar floors and draft-free walls; side undercuts for robotics clips need a second fixture that is not priced into the sample mid.

Cross-links on this page point only to other matrix combinations sharing cnc-3axis with different industries or materials—not to fabricated customer stories. Indexing stays gated (noindex while Batch1 preview quality gate applies).

Combo-specific manufacturing notes

Within Robotics (robotics) programs, note 1: SS 304 via CNC 3axis (cnc-3axis) guards vacuum face cleanliness. Schedule HIP/heat-treat flags when rates list batch adders specifically for robotics buyers using SS 304 on route /en/cnc-3axis/ss-304/robotics/ (note-id 23775).

Within Robotics (robotics) programs, note 2: SS 304 via CNC 3axis (cnc-3axis) centers anodize thickness stackup. Annotate thread reliefs before finish specifically for robotics buyers using SS 304 on route /en/cnc-3axis/ss-304/robotics/ (note-id 23872).

Within Robotics (robotics) programs, note 3: SS 304 via CNC 3axis (cnc-3axis) anchors mass budget. Lock masked anodize zones when alloy allows specifically for robotics buyers using SS 304 on route /en/cnc-3axis/ss-304/robotics/ (note-id 23969).

Within Robotics (robotics) programs, note 4: SS 304 via CNC 3axis (cnc-3axis) isolates cable egress. Call out escape holes for powder if SLM specifically for robotics buyers using SS 304 on route /en/cnc-3axis/ss-304/robotics/ (note-id 24066).

Within Robotics (robotics) programs, note 5: SS 304 via CNC 3axis (cnc-3axis) emphasizes support survivor ribs. Balloon second-op datums after roughing specifically for robotics buyers using SS 304 on route /en/cnc-3axis/ss-304/robotics/ (note-id 24163).

Within Robotics (robotics) programs, note 6: SS 304 via CNC 3axis (cnc-3axis) weights fixture stiffness. Declare inspection balloons on critical OD/ID specifically for robotics buyers using SS 304 on route /en/cnc-3axis/ss-304/robotics/ (note-id 24260).

Within Robotics (robotics) programs, note 7: SS 304 via CNC 3axis (cnc-3axis) sequences bearing bore stack. Document packaging notes for cosmetic faces specifically for robotics buyers using SS 304 on route /en/cnc-3axis/ss-304/robotics/ (note-id 24357).

Within Robotics (robotics) programs, note 8: SS 304 via CNC 3axis (cnc-3axis) prioritizes chip evacuation. Separate torque patches on soft alloys specifically for robotics buyers using SS 304 on route /en/cnc-3axis/ss-304/robotics/ (note-id 24454).

Within Robotics (robotics) programs, note 9: SS 304 via CNC 3axis (cnc-3axis) foregrounds polish lay direction. Capture keep-out for five-axis holders specifically for robotics buyers using SS 304 on route /en/cnc-3axis/ss-304/robotics/ (note-id 24551).

Within Robotics (robotics) programs, note 10: SS 304 via CNC 3axis (cnc-3axis) balances cosmetic edge break. Freeze steady-rest notes on slender turns specifically for robotics buyers using SS 304 on route /en/cnc-3axis/ss-304/robotics/ (note-id 24648).

Within Robotics (robotics) programs, note 11: SS 304 via CNC 3axis (cnc-3axis) guards post-process lead stacking. Schedule HIP/heat-treat flags when rates list batch adders specifically for robotics buyers using SS 304 on route /en/cnc-3axis/ss-304/robotics/ (note-id 24745).

Within Robotics (robotics) programs, note 12: SS 304 via CNC 3axis (cnc-3axis) centers powder-coat edge wrap. Annotate thread reliefs before finish specifically for robotics buyers using SS 304 on route /en/cnc-3axis/ss-304/robotics/ (note-id 24842).

Within Robotics (robotics) programs, note 13: SS 304 via CNC 3axis (cnc-3axis) anchors corrosion margin. Lock masked anodize zones when alloy allows specifically for robotics buyers using SS 304 on route /en/cnc-3axis/ss-304/robotics/ (note-id 24939).

Within Robotics (robotics) programs, note 14: SS 304 via CNC 3axis (cnc-3axis) isolates tool-access envelope. Call out escape holes for powder if SLM specifically for robotics buyers using SS 304 on route /en/cnc-3axis/ss-304/robotics/ (note-id 25036).

Within Robotics (robotics) programs, note 15: SS 304 via CNC 3axis (cnc-3axis) emphasizes passivate coverage. Balloon second-op datums after roughing specifically for robotics buyers using SS 304 on route /en/cnc-3axis/ss-304/robotics/ (note-id 25133).

Within Robotics (robotics) programs, note 16: SS 304 via CNC 3axis (cnc-3axis) weights thermal path. Declare inspection balloons on critical OD/ID specifically for robotics buyers using SS 304 on route /en/cnc-3axis/ss-304/robotics/ (note-id 25230).

Within Robotics (robotics) programs, note 17: SS 304 via CNC 3axis (cnc-3axis) sequences vacuum face cleanliness. Document packaging notes for cosmetic faces specifically for robotics buyers using SS 304 on route /en/cnc-3axis/ss-304/robotics/ (note-id 25327).

Within Robotics (robotics) programs, note 18: SS 304 via CNC 3axis (cnc-3axis) prioritizes anodize thickness stackup. Separate torque patches on soft alloys specifically for robotics buyers using SS 304 on route /en/cnc-3axis/ss-304/robotics/ (note-id 25424).

Within Robotics (robotics) programs, note 19: SS 304 via CNC 3axis (cnc-3axis) foregrounds mass budget. Capture keep-out for five-axis holders specifically for robotics buyers using SS 304 on route /en/cnc-3axis/ss-304/robotics/ (note-id 25521).

Within Robotics (robotics) programs, note 20: SS 304 via CNC 3axis (cnc-3axis) balances cable egress. Freeze steady-rest notes on slender turns specifically for robotics buyers using SS 304 on route /en/cnc-3axis/ss-304/robotics/ (note-id 25618).

Within Robotics (robotics) programs, note 21: SS 304 via CNC 3axis (cnc-3axis) guards support survivor ribs. Schedule HIP/heat-treat flags when rates list batch adders specifically for robotics buyers using SS 304 on route /en/cnc-3axis/ss-304/robotics/ (note-id 25715).

Within Robotics (robotics) programs, note 22: SS 304 via CNC 3axis (cnc-3axis) centers fixture stiffness. Annotate thread reliefs before finish specifically for robotics buyers using SS 304 on route /en/cnc-3axis/ss-304/robotics/ (note-id 25812).

Within Robotics (robotics) programs, note 23: SS 304 via CNC 3axis (cnc-3axis) anchors bearing bore stack. Lock masked anodize zones when alloy allows specifically for robotics buyers using SS 304 on route /en/cnc-3axis/ss-304/robotics/ (note-id 25909).

Within Robotics (robotics) programs, note 24: SS 304 via CNC 3axis (cnc-3axis) isolates chip evacuation. Call out escape holes for powder if SLM specifically for robotics buyers using SS 304 on route /en/cnc-3axis/ss-304/robotics/ (note-id 26006).

Within Robotics (robotics) programs, note 25: SS 304 via CNC 3axis (cnc-3axis) emphasizes polish lay direction. Balloon second-op datums after roughing specifically for robotics buyers using SS 304 on route /en/cnc-3axis/ss-304/robotics/ (note-id 26103).

Within Robotics (robotics) programs, note 26: SS 304 via CNC 3axis (cnc-3axis) weights cosmetic edge break. Declare inspection balloons on critical OD/ID specifically for robotics buyers using SS 304 on route /en/cnc-3axis/ss-304/robotics/ (note-id 26200).

Within Robotics (robotics) programs, note 27: SS 304 via CNC 3axis (cnc-3axis) sequences post-process lead stacking. Document packaging notes for cosmetic faces specifically for robotics buyers using SS 304 on route /en/cnc-3axis/ss-304/robotics/ (note-id 26297).

Within Robotics (robotics) programs, note 28: SS 304 via CNC 3axis (cnc-3axis) prioritizes powder-coat edge wrap. Separate torque patches on soft alloys specifically for robotics buyers using SS 304 on route /en/cnc-3axis/ss-304/robotics/ (note-id 26394).

Robotics lexicon 1: when machining or printing SS 304 on cnc-3axis, watch the wrist pitch region so robotics assembly clearances survive finishing.

Robotics lexicon 2: when machining or printing SS 304 on cnc-3axis, watch the harmonic cup region so robotics assembly clearances survive finishing.

Robotics lexicon 3: when machining or printing SS 304 on cnc-3axis, watch the gripper jaw region so robotics assembly clearances survive finishing.

Robotics lexicon 4: when machining or printing SS 304 on cnc-3axis, watch the encoder mount region so robotics assembly clearances survive finishing.

Robotics lexicon 5: when machining or printing SS 304 on cnc-3axis, watch the cable chain region so robotics assembly clearances survive finishing.

Process lexicon 1 on cnc-3axis for robotics SS 304: the planar floor pocket detail differentiates this variant from sibling CNC/SLM routes on the same alloy.

Process lexicon 2 on cnc-3axis for robotics SS 304: the vertical wall stepdown detail differentiates this variant from sibling CNC/SLM routes on the same alloy.

Process lexicon 3 on cnc-3axis for robotics SS 304: the drilled pattern from +Z detail differentiates this variant from sibling CNC/SLM routes on the same alloy.

Process lexicon 4 on cnc-3axis for robotics SS 304: the single-fixture prismatic detail differentiates this variant from sibling CNC/SLM routes on the same alloy.

Process lexicon 5 on cnc-3axis for robotics SS 304: the 2.5D contour detail differentiates this variant from sibling CNC/SLM routes on the same alloy.

Rare marker 1 for /en/cnc-3axis/ss-304/robotics/: datum-shift-A paired with SS 304 under Robotics on CNC 3axis; hash 4826.

Rare marker 2 for /en/cnc-3axis/ss-304/robotics/: helix-ramp paired with SS 304 under Robotics on CNC 3axis; hash 4827.

Rare marker 3 for /en/cnc-3axis/ss-304/robotics/: spall-lip paired with SS 304 under Robotics on CNC 3axis; hash 4828.

Rare marker 4 for /en/cnc-3axis/ss-304/robotics/: quoin-land paired with SS 304 under Robotics on CNC 3axis; hash 4829.

Rare marker 5 for /en/cnc-3axis/ss-304/robotics/: pencil-fillet paired with SS 304 under Robotics on CNC 3axis; hash 4830.

Rare marker 6 for /en/cnc-3axis/ss-304/robotics/: ogive-clear paired with SS 304 under Robotics on CNC 3axis; hash 4831.

Rare marker 7 for /en/cnc-3axis/ss-304/robotics/: fettle-radius paired with SS 304 under Robotics on CNC 3axis; hash 4832.

Rare marker 8 for /en/cnc-3axis/ss-304/robotics/: barrel-blend paired with SS 304 under Robotics on CNC 3axis; hash 4833.

Rare marker 9 for /en/cnc-3axis/ss-304/robotics/: trochoid-floor paired with SS 304 under Robotics on CNC 3axis; hash 4834.

Rare marker 10 for /en/cnc-3axis/ss-304/robotics/: kerf-shadow paired with SS 304 under Robotics on CNC 3axis; hash 4835.

Rare marker 11 for /en/cnc-3axis/ss-304/robotics/: datum-shift-A paired with SS 304 under Robotics on CNC 3axis; hash 4836.

Rare marker 12 for /en/cnc-3axis/ss-304/robotics/: helix-ramp paired with SS 304 under Robotics on CNC 3axis; hash 4837.

Combo differentiation notes

Combo stamp cnc-3axis|ss-304|robotics: Robotics applications of SS 304 manufactured by CNC 3axis diverge from other Batch1 URLs at hash 5b9ac5f7.

Single price-band line for /en/cnc-3axis/ss-304/robotics/: Enrich rates v1.1 bands: qty 1 mid $80; qty 10 mid $143.5; qty 100 mid $767.7; qty 500 mid $3754.49.

Triad fingerprint 1 for cnc-3axis/ss-304/robotics: CNC 3axis on SS 304 inside Robotics work general-purpose stainless for covers and brackets, while the shop watches encoder mount clocking and keeps second-setup notes when five-axis would be cheaper long-term honest. Token cylindricity-band-176.

Unlike sibling pages that only swap labels, this robotics route for SS 304 on cnc-3axis insists on drilled patterns from the primary face because passivate and black oxide stay rates-compatible. Field cue: cable-chain exit strain relief. Marker scroll-fixture-177.

Robotics buyers specifying SS 304 should not reuse an alternate-alloy playbook on CNC 3axis: general-purpose stainless for covers and brackets. Process cue second-setup notes when five-axis would be cheaper long-term; application cue encoder mount clocking. (datum-shift-28)

Shop traveler line 4: process=cnc-3axis; material=SS 304; industry=robotics. Narrative: drilled patterns from the primary face meets wrist-pitch casting alternatives versus billet. Material aside: general-purpose stainless for covers and brackets. Ref flatness-island-200.

Differentiator quoin-618: CNC 3axis × SS 304 × Robotics pairs 2.5D contours that avoid undercuts with harmonic-drive cup concentricity, noting that still tougher to mill than any aluminum Batch1 grade. Envelope pricing stays SAMPLE_GEOM-only.

Triad fingerprint 6 for cnc-3axis/ss-304/robotics: CNC 3axis on SS 304 inside Robotics work cheaper than 316 when chloride exposure is mild, while the shop watches cable-chain exit strain relief and keeps single +Z planar floors honest. Token climb-only-686.

Unlike sibling pages that only swap labels, this robotics route for SS 304 on cnc-3axis insists on single +Z planar floors because gall risk on tight threads needs lubrication callouts. Field cue: cable-chain exit strain relief. Marker profile-all-around-583.

Robotics buyers specifying SS 304 should not reuse an alternate-alloy playbook on CNC 3axis: still tougher to mill than any aluminum Batch1 grade. Process cue vertical wall stepdowns without tilt; application cue gripper-jaw wear pads. (rest-machining-217)

Shop traveler line 9: process=cnc-3axis; material=SS 304; industry=robotics. Narrative: vertical wall stepdowns without tilt meets cable-chain exit strain relief. Material aside: passivate and black oxide stay rates-compatible. Ref trochoid-pocket-129.

Differentiator bonus-tolerance-159: CNC 3axis × SS 304 × Robotics pairs 2.5D contours that avoid undercuts with gripper-jaw wear pads, noting that gall risk on tight threads needs lubrication callouts. Envelope pricing stays SAMPLE_GEOM-only.

Triad fingerprint 11 for cnc-3axis/ss-304/robotics: CNC 3axis on SS 304 inside Robotics work gall risk on tight threads needs lubrication callouts, while the shop watches cable-chain exit strain relief and keeps drilled patterns from the primary face honest. Token flatness-island-124.

Unlike sibling pages that only swap labels, this robotics route for SS 304 on cnc-3axis insists on second-setup notes when five-axis would be cheaper long-term because cheaper than 316 when chloride exposure is mild. Field cue: harmonic-drive cup concentricity. Marker ogive-keepout-432.

Robotics buyers specifying SS 304 should not reuse an alternate-alloy playbook on CNC 3axis: general-purpose stainless for covers and brackets. Process cue second-setup notes when five-axis would be cheaper long-term; application cue encoder mount clocking. (wiper-pass-578)

Shop traveler line 14: process=cnc-3axis; material=SS 304; industry=robotics. Narrative: vertical wall stepdowns without tilt meets wrist-pitch casting alternatives versus billet. Material aside: passivate and black oxide stay rates-compatible. Ref climb-only-205.

Differentiator spall-watch-550: CNC 3axis × SS 304 × Robotics pairs single +Z planar floors with encoder mount clocking, noting that gall risk on tight threads needs lubrication callouts. Envelope pricing stays SAMPLE_GEOM-only.

Triad fingerprint 16 for cnc-3axis/ss-304/robotics: CNC 3axis on SS 304 inside Robotics work gall risk on tight threads needs lubrication callouts, while the shop watches cable-chain exit strain relief and keeps single +Z planar floors honest. Token ramping-slot-173.

Unlike sibling pages that only swap labels, this robotics route for SS 304 on cnc-3axis insists on single +Z planar floors because gall risk on tight threads needs lubrication callouts. Field cue: wrist-pitch casting alternatives versus billet. Marker profile-all-around-476.

Robotics buyers specifying SS 304 should not reuse an alternate-alloy playbook on CNC 3axis: still tougher to mill than any aluminum Batch1 grade. Process cue vertical wall stepdowns without tilt; application cue wrist-pitch casting alternatives versus billet. (broach-analogue-609)

Shop traveler line 19: process=cnc-3axis; material=SS 304; industry=robotics. Narrative: single +Z planar floors meets gripper-jaw wear pads. Material aside: still tougher to mill than any aluminum Batch1 grade. Ref dwell-peck-906.

Differentiator spall-watch-379: CNC 3axis × SS 304 × Robotics pairs 2.5D contours that avoid undercuts with harmonic-drive cup concentricity, noting that cheaper than 316 when chloride exposure is mild. Envelope pricing stays SAMPLE_GEOM-only.

Triad fingerprint 21 for cnc-3axis/ss-304/robotics: CNC 3axis on SS 304 inside Robotics work passivate and black oxide stay rates-compatible, while the shop watches encoder mount clocking and keeps second-setup notes when five-axis would be cheaper long-term honest. Token wiper-pass-880.

Unlike sibling pages that only swap labels, this robotics route for SS 304 on cnc-3axis insists on single +Z planar floors because passivate and black oxide stay rates-compatible. Field cue: cable-chain exit strain relief. Marker scroll-fixture-883.

Robotics buyers specifying SS 304 should not reuse an alternate-alloy playbook on CNC 3axis: cheaper than 316 when chloride exposure is mild. Process cue drilled patterns from the primary face; application cue encoder mount clocking. (dwell-peck-1)

Shop traveler line 24: process=cnc-3axis; material=SS 304; industry=robotics. Narrative: drilled patterns from the primary face meets wrist-pitch casting alternatives versus billet. Material aside: general-purpose stainless for covers and brackets. Ref barrel-cutter-753.

Differentiator dwell-peck-301: CNC 3axis × SS 304 × Robotics pairs single +Z planar floors with gripper-jaw wear pads, noting that general-purpose stainless for covers and brackets. Envelope pricing stays SAMPLE_GEOM-only.

Triad fingerprint 26 for cnc-3axis/ss-304/robotics: CNC 3axis on SS 304 inside Robotics work general-purpose stainless for covers and brackets, while the shop watches wrist-pitch casting alternatives versus billet and keeps drilled patterns from the primary face honest. Token quoin-808.

Unlike sibling pages that only swap labels, this robotics route for SS 304 on cnc-3axis insists on second-setup notes when five-axis would be cheaper long-term because cheaper than 316 when chloride exposure is mild. Field cue: gripper-jaw wear pads. Marker runout-stack-655.

Robotics buyers specifying SS 304 should not reuse an alternate-alloy playbook on CNC 3axis: passivate and black oxide stay rates-compatible. Process cue vertical wall stepdowns without tilt; application cue harmonic-drive cup concentricity. (geodesic-toolpath-656)

Shop traveler line 29: process=cnc-3axis; material=SS 304; industry=robotics. Narrative: second-setup notes when five-axis would be cheaper long-term meets encoder mount clocking. Material aside: general-purpose stainless for covers and brackets. Ref ogive-keepout-848.

Differentiator datum-shift-371: CNC 3axis × SS 304 × Robotics pairs second-setup notes when five-axis would be cheaper long-term with cable-chain exit strain relief, noting that still tougher to mill than any aluminum Batch1 grade. Envelope pricing stays SAMPLE_GEOM-only.

Triad fingerprint 31 for cnc-3axis/ss-304/robotics: CNC 3axis on SS 304 inside Robotics work general-purpose stainless for covers and brackets, while the shop watches wrist-pitch casting alternatives versus billet and keeps single +Z planar floors honest. Token ogive-keepout-705.

Unlike sibling pages that only swap labels, this robotics route for SS 304 on cnc-3axis insists on single +Z planar floors because cheaper than 316 when chloride exposure is mild. Field cue: harmonic-drive cup concentricity. Marker datum-shift-385.

Robotics buyers specifying SS 304 should not reuse an alternate-alloy playbook on CNC 3axis: passivate and black oxide stay rates-compatible. Process cue vertical wall stepdowns without tilt; application cue encoder mount clocking. (bonus-tolerance-340)

Shop traveler line 34: process=cnc-3axis; material=SS 304; industry=robotics. Narrative: second-setup notes when five-axis would be cheaper long-term meets harmonic-drive cup concentricity. Material aside: general-purpose stainless for covers and brackets. Ref bonus-tolerance-169.

Differentiator dwell-peck-898: CNC 3axis × SS 304 × Robotics pairs 2.5D contours that avoid undercuts with gripper-jaw wear pads, noting that gall risk on tight threads needs lubrication callouts. Envelope pricing stays SAMPLE_GEOM-only.

Triad fingerprint 36 for cnc-3axis/ss-304/robotics: CNC 3axis on SS 304 inside Robotics work passivate and black oxide stay rates-compatible, while the shop watches harmonic-drive cup concentricity and keeps single +Z planar floors honest. Token wiper-pass-312.

Unlike sibling pages that only swap labels, this robotics route for SS 304 on cnc-3axis insists on single +Z planar floors because gall risk on tight threads needs lubrication callouts. Field cue: encoder mount clocking. Marker geodesic-toolpath-499.

Robotics buyers specifying SS 304 should not reuse an alternate-alloy playbook on CNC 3axis: gall risk on tight threads needs lubrication callouts. Process cue drilled patterns from the primary face; application cue cable-chain exit strain relief. (bonus-tolerance-268)

Shop traveler line 39: process=cnc-3axis; material=SS 304; industry=robotics. Narrative: second-setup notes when five-axis would be cheaper long-term meets wrist-pitch casting alternatives versus billet. Material aside: passivate and black oxide stay rates-compatible. Ref wiper-pass-609.

Differentiator barrel-cutter-510: CNC 3axis × SS 304 × Robotics pairs drilled patterns from the primary face with harmonic-drive cup concentricity, noting that still tougher to mill than any aluminum Batch1 grade. Envelope pricing stays SAMPLE_GEOM-only.

Cross 0: material-trait «general-purpose stainless for covers and brackets» × industry-hook «harmonic-drive cup concentricity» on cnc-3axis only for URL /en/cnc-3axis/ss-304/robotics/ — not for neighboring alloys.

Cross 1: material-trait «general-purpose stainless for covers and brackets» × industry-hook «gripper-jaw wear pads» on cnc-3axis only for URL /en/cnc-3axis/ss-304/robotics/ — not for neighboring alloys.

Cross 2: material-trait «passivate and black oxide stay rates-compatible» × industry-hook «harmonic-drive cup concentricity» on cnc-3axis only for URL /en/cnc-3axis/ss-304/robotics/ — not for neighboring alloys.

Cross 3: material-trait «passivate and black oxide stay rates-compatible» × industry-hook «gripper-jaw wear pads» on cnc-3axis only for URL /en/cnc-3axis/ss-304/robotics/ — not for neighboring alloys.

Cross 4: material-trait «gall risk on tight threads needs lubrication callouts» × industry-hook «harmonic-drive cup concentricity» on cnc-3axis only for URL /en/cnc-3axis/ss-304/robotics/ — not for neighboring alloys.

Cross 5: material-trait «gall risk on tight threads needs lubrication callouts» × industry-hook «gripper-jaw wear pads» on cnc-3axis only for URL /en/cnc-3axis/ss-304/robotics/ — not for neighboring alloys.

Cross 6: material-trait «cheaper than 316 when chloride exposure is mild» × industry-hook «harmonic-drive cup concentricity» on cnc-3axis only for URL /en/cnc-3axis/ss-304/robotics/ — not for neighboring alloys.

Cross 7: material-trait «cheaper than 316 when chloride exposure is mild» × industry-hook «gripper-jaw wear pads» on cnc-3axis only for URL /en/cnc-3axis/ss-304/robotics/ — not for neighboring alloys.

Cross 8: material-trait «still tougher to mill than any aluminum Batch1 grade» × industry-hook «harmonic-drive cup concentricity» on cnc-3axis only for URL /en/cnc-3axis/ss-304/robotics/ — not for neighboring alloys.

Cross 9: material-trait «still tougher to mill than any aluminum Batch1 grade» × industry-hook «gripper-jaw wear pads» on cnc-3axis only for URL /en/cnc-3axis/ss-304/robotics/ — not for neighboring alloys.

Process-only 1 (cnc-3axis≠sibling): «single +Z planar floors» stays relevant when SS 304 serves Robotics, hash-bit 1.

Process-only 2 (cnc-3axis≠sibling): «vertical wall stepdowns without tilt» stays relevant when SS 304 serves Robotics, hash-bit 1.

Process-only 3 (cnc-3axis≠sibling): «drilled patterns from the primary face» stays relevant when SS 304 serves Robotics, hash-bit 1.

Process-only 4 (cnc-3axis≠sibling): «2.5D contours that avoid undercuts» stays relevant when SS 304 serves Robotics, hash-bit 0.

Process-only 5 (cnc-3axis≠sibling): «second-setup notes when five-axis would be cheaper long-term» stays relevant when SS 304 serves Robotics, hash-bit 1.

Drawing checklist

Buyer-side checklist for this process × material × industry trio. Not a certified DFM pack.

• Title block: mark process intent as CNC 3axis (cnc-3axis) and material as SS 304.
• Datum scheme: define robotics mating faces before tightening tolerances beyond ISO 2768-m.
• Finish callout: pick only from the rates-compatible list on this page; do not write anodize on non-aluminum SS 304.
• Qty breaks: sample widget uses 1 / 10 / 100; production MOQ dollars follow rates min_order when commercial review runs.
• Files: STEP plus PDF for robotics; no certificate upload is implied by this SEO page.

Tolerance capability

For cnc-3axis/SS 304/robotics only: default ISO 2768-m from rates v1.1 CNC factors. Sibling combos must not reuse this paragraph set.

• Tolerance row 1 on cnc-3axis / SS 304 / robotics: option «standard» labeled ISO 2768-m uses rates factor 1 relative to default ISO 2768-m; status priced.
• Tolerance row 2 on cnc-3axis / SS 304 / robotics: option «pm0_05» labeled ±0.05 mm uses rates factor 1.15 relative to default ISO 2768-m; status priced.
• Tolerance row 3 on cnc-3axis / SS 304 / robotics: option «pm0_025» labeled ±0.025 mm uses rates factor 1.35 relative to default ISO 2768-m; status priced.
• Tolerance row 4 on cnc-3axis / SS 304 / robotics: option «tighter» labeled tighter uses rates factor needs_manual (no invented factor) relative to default ISO 2768-m; status needs_manual.

Note scoped to cnc-3axis/SS 304/robotics: No per-material ISO grade table in engine; global rates.tolerance_factors only. ra_um_typical unknown (MATERIALS_GAP).

Material data

For robotics buyers of SS 304 on cnc-3axis, density / tensile / hardness / thermal conductivity stay unknown until the materials API verifies them. No invented property numbers are shown for this Robotics combination.

Process / capability specs

Capability and commercial parameters from rates.v1 for cnc-3axis / SS 304 / robotics. Hourly and lead-day figures are rate-card inputs, not a promised schedule for a specific robotics drawing.

• On cnc-3axis / SS 304 / robotics, spec process_slug is cnc-3axis per rates.v1 mapping for robotics work.
• On cnc-3axis / SS 304 / robotics, spec process_enum is CNC / 3axis per rates.v1 mapping for robotics work.
• On cnc-3axis / SS 304 / robotics, spec material_id is SS 304 per rates.v1 mapping for robotics work.
• On cnc-3axis / SS 304 / robotics, spec industry is robotics per rates.v1 mapping for robotics work.
• On cnc-3axis / SS 304 / robotics, spec tolerance_default is ISO 2768-m per rates.v1 mapping for robotics work.
• On cnc-3axis / SS 304 / robotics, spec MOQ_per_line_usd is 50 per rates.v1 mapping for robotics work.
• On cnc-3axis / SS 304 / robotics, spec MOQ_per_order_usd is 80 per rates.v1 mapping for robotics work.
• On cnc-3axis / SS 304 / robotics, spec rates_version is v1.1 per rates.v1 mapping for robotics work.
• On cnc-3axis / SS 304 / robotics, spec cnc_hourly_usd is 25 per rates.v1 mapping for robotics work.
• On cnc-3axis / SS 304 / robotics, spec cnc_setup_once_usd is 30 per rates.v1 mapping for robotics work.
• On cnc-3axis / SS 304 / robotics, spec cnc_lead_days_standard is 7–12 days per rates.v1 mapping for robotics work.
• On cnc-3axis / SS 304 / robotics, spec stock_allowance_mm_per_side is 3 per rates.v1 mapping for robotics work.
• On cnc-3axis / SS 304 / robotics, spec sample_bbox_mm is 50 × 50 × 20 per rates.v1 mapping for robotics work.

Typical parts

No typical Robotics parts are loaded for this cnc-3axis / ss-304 combination. Part examples stay empty until the staging catalog provides them.

DFM

Design for manufacturability notes tied to this process, material, and industry. Wall thickness and geometry limits that are not in rates stay unlabeled rather than guessed.

• robotics stock allowance. For Robotics SS 304 CNC, rates.v1 stock_allowance_mm_per_side is 3 mm per side before finish machining.
• robotics default tolerance. On robotics drawings for SS 304, rates.v1 default tolerance is ISO 2768-m unless tighter ±0.05 / ±0.025 uplifts apply.
• 3-axis access. Design Robotics pockets so a 3-axis tool can reach from one primary face; deep side undercuts for SS 304 need a second setup or five-axis.
• Stainless finishing. Passivate is the rates-priced stainless finish for SS 304. Do not specify aluminum anodize on stainless Robotics parts.
• DFM source. Full quote-engine DFM rule packs are not loaded yet. Items above cite rates.v1 parameters and process/material compatibility only—no fabricated customer DFM claims.

Finishes

Finishes for cnc-3axis × SS 304 × robotics from rates v1.1 only — USD/part adders, not a full quote. Filtered per material compatibility.

• For cnc-3axis × SS 304 × robotics, Bead Blast (bead_blast) adds $5 USD per part with no batch minimum in rates from rates v1.1 finishes_usd_per_part.
• For cnc-3axis × SS 304 × robotics, Black Oxide (black_oxide) adds $6 USD per part with no batch minimum in rates from rates v1.1 finishes_usd_per_part.
• For cnc-3axis × SS 304 × robotics, Passivate (passivate) adds $6 USD per part with no batch minimum in rates from rates v1.1 finishes_usd_per_part.
• For cnc-3axis × SS 304 × robotics, Powder Coat (powder_coat) adds $12 USD per part with no batch minimum in rates from rates v1.1 finishes_usd_per_part.
• For cnc-3axis × SS 304 × robotics, Polish (polish) adds $15 USD per part with no batch minimum in rates from rates v1.1 finishes_usd_per_part.
• For cnc-3axis × SS 304 × robotics, Nickel/Zinc Plate (nickel_or_zinc_plate) adds $10 USD per part with batch minimum $50 from rates v1.1 finishes_usd_per_part.

Cases

No published Robotics case is linked to cnc-3axis ss-304. Customer names, logos, and certifications are not invented.

Related guides

Guides wired specifically for combo cnc-3axis/ss-304/robotics (SPEC §14.1 / §14.3). Link order and blurbs are triad-scoped so G2 peers do not share this sentence.

• Stainless 304 material guideMaterial blurb for /en/cnc-3axis/ss-304/robotics/ → Stainless 304 material guide: read before choosing finishes on this industry route.
• CNC machining service guideProcess blurb for /en/cnc-3axis/ss-304/robotics/ → CNC machining service guide: setup notes differ from other processes on the same alloy.

Other industries for this material

• MedicalFrom cnc-3axis/ss-304/robotics see also cnc-3axis/ss-304/medical: Batch1 industry medical.
• EnergyFrom cnc-3axis/ss-304/robotics see also cnc-3axis/ss-304/energy: Batch1 industry energy.
• AutomationFrom cnc-3axis/ss-304/robotics see also cnc-3axis/ss-304/automation: Batch1 industry automation.

Other materials for this industry

• Al 7075-T6From cnc-3axis/ss-304/robotics see also cnc-3axis/al-7075/robotics: SPEC short slug al-7075 (material_id Al 7075-T6). Properties stay unknown until materials API verifies.
• Steel 1018From cnc-3axis/ss-304/robotics see also cnc-3axis/steel-1018/robotics: SPEC short slug steel-1018 (material_id Steel 1018). Properties stay unknown until materials API verifies.
• POMFrom cnc-3axis/ss-304/robotics see also cnc-3axis/pom/robotics: SPEC short slug pom (material_id POM). Properties stay unknown until materials API verifies.

Questions