CNC 5axis PEEK for Automation

Combination notes

Among Automation projects, this page is the cnc-5axis × peek × automation route for PEEK. Applied to automation: Five-axis CNC keeps the cutter normal to compound surfaces so organic brackets, impeller-like features, and multi-face aerospace fittings can finish in fewer fixtures. Tool-length and collision checks stay mandatory for deep cavities. For Automation material choice PEEK: PEEK is a high-temperature polymer for medical and semiconductor fixtures where metals would short or corrode. Anodize, passivate, and plating are excluded; rates allow bead blast, polish, and powder coat only. Automation frames, locators, and wear pads need durable edges and predictable lead times. Mild steel or aluminum with powder coat or anodize covers most plant environments without inventing certifications. The automation example quote envelope stays 50 × 50 × 20 mm at quantities 1, 10, and 100. Mid prices for this Automation combo come from staging /rates or a priced matrix row—never invented marketing copy.

Industry application notes

For automation programs, CNC 5axis on PEEK is positioned as a subtractive route under URL slug cnc-5axis. Buyers typically upload STEP/IGES with automation-specific datums; this page does not invent a case study or logo for that upload.

Automation nest plates and wear strips in PEEK see cyclic abrasion. CNC 5axis with powder coat or anodize (when compatible) covers plant humidity without inventing IP ratings.

Five-axis continuous finishing for automation PEEK surfaces reduces witness lines on show faces but increases collision-check time versus 3-axis peers on the same material.

Cross-links on this page point only to other matrix combinations sharing cnc-5axis with different industries or materials—not to fabricated customer stories. Indexing stays gated (noindex while Batch1 preview quality gate applies).

Combo-specific manufacturing notes

Within Automation (automation) programs, note 1: PEEK via CNC 5axis (cnc-5axis) isolates anodize thickness stackup. Separate steady-rest notes on slender turns specifically for automation buyers using PEEK on route /en/cnc-5axis/peek/automation/ (note-id 49896).

Within Automation (automation) programs, note 2: PEEK via CNC 5axis (cnc-5axis) emphasizes mass budget. Capture HIP/heat-treat flags when rates list batch adders specifically for automation buyers using PEEK on route /en/cnc-5axis/peek/automation/ (note-id 49993).

Within Automation (automation) programs, note 3: PEEK via CNC 5axis (cnc-5axis) weights cable egress. Freeze thread reliefs before finish specifically for automation buyers using PEEK on route /en/cnc-5axis/peek/automation/ (note-id 50090).

Within Automation (automation) programs, note 4: PEEK via CNC 5axis (cnc-5axis) sequences support survivor ribs. Schedule masked anodize zones when alloy allows specifically for automation buyers using PEEK on route /en/cnc-5axis/peek/automation/ (note-id 50187).

Within Automation (automation) programs, note 5: PEEK via CNC 5axis (cnc-5axis) prioritizes fixture stiffness. Annotate escape holes for powder if SLM specifically for automation buyers using PEEK on route /en/cnc-5axis/peek/automation/ (note-id 50284).

Within Automation (automation) programs, note 6: PEEK via CNC 5axis (cnc-5axis) foregrounds bearing bore stack. Lock second-op datums after roughing specifically for automation buyers using PEEK on route /en/cnc-5axis/peek/automation/ (note-id 50381).

Within Automation (automation) programs, note 7: PEEK via CNC 5axis (cnc-5axis) balances chip evacuation. Call out inspection balloons on critical OD/ID specifically for automation buyers using PEEK on route /en/cnc-5axis/peek/automation/ (note-id 50478).

Within Automation (automation) programs, note 8: PEEK via CNC 5axis (cnc-5axis) guards polish lay direction. Balloon packaging notes for cosmetic faces specifically for automation buyers using PEEK on route /en/cnc-5axis/peek/automation/ (note-id 50575).

Within Automation (automation) programs, note 9: PEEK via CNC 5axis (cnc-5axis) centers cosmetic edge break. Declare torque patches on soft alloys specifically for automation buyers using PEEK on route /en/cnc-5axis/peek/automation/ (note-id 50672).

Within Automation (automation) programs, note 10: PEEK via CNC 5axis (cnc-5axis) anchors post-process lead stacking. Document keep-out for five-axis holders specifically for automation buyers using PEEK on route /en/cnc-5axis/peek/automation/ (note-id 50769).

Within Automation (automation) programs, note 11: PEEK via CNC 5axis (cnc-5axis) isolates powder-coat edge wrap. Separate steady-rest notes on slender turns specifically for automation buyers using PEEK on route /en/cnc-5axis/peek/automation/ (note-id 50866).

Within Automation (automation) programs, note 12: PEEK via CNC 5axis (cnc-5axis) emphasizes corrosion margin. Capture HIP/heat-treat flags when rates list batch adders specifically for automation buyers using PEEK on route /en/cnc-5axis/peek/automation/ (note-id 50963).

Within Automation (automation) programs, note 13: PEEK via CNC 5axis (cnc-5axis) weights tool-access envelope. Freeze thread reliefs before finish specifically for automation buyers using PEEK on route /en/cnc-5axis/peek/automation/ (note-id 51060).

Within Automation (automation) programs, note 14: PEEK via CNC 5axis (cnc-5axis) sequences passivate coverage. Schedule masked anodize zones when alloy allows specifically for automation buyers using PEEK on route /en/cnc-5axis/peek/automation/ (note-id 51157).

Within Automation (automation) programs, note 15: PEEK via CNC 5axis (cnc-5axis) prioritizes thermal path. Annotate escape holes for powder if SLM specifically for automation buyers using PEEK on route /en/cnc-5axis/peek/automation/ (note-id 51254).

Within Automation (automation) programs, note 16: PEEK via CNC 5axis (cnc-5axis) foregrounds vacuum face cleanliness. Lock second-op datums after roughing specifically for automation buyers using PEEK on route /en/cnc-5axis/peek/automation/ (note-id 51351).

Within Automation (automation) programs, note 17: PEEK via CNC 5axis (cnc-5axis) balances anodize thickness stackup. Call out inspection balloons on critical OD/ID specifically for automation buyers using PEEK on route /en/cnc-5axis/peek/automation/ (note-id 51448).

Within Automation (automation) programs, note 18: PEEK via CNC 5axis (cnc-5axis) guards mass budget. Balloon packaging notes for cosmetic faces specifically for automation buyers using PEEK on route /en/cnc-5axis/peek/automation/ (note-id 51545).

Within Automation (automation) programs, note 19: PEEK via CNC 5axis (cnc-5axis) centers cable egress. Declare torque patches on soft alloys specifically for automation buyers using PEEK on route /en/cnc-5axis/peek/automation/ (note-id 51642).

Within Automation (automation) programs, note 20: PEEK via CNC 5axis (cnc-5axis) anchors support survivor ribs. Document keep-out for five-axis holders specifically for automation buyers using PEEK on route /en/cnc-5axis/peek/automation/ (note-id 51739).

Within Automation (automation) programs, note 21: PEEK via CNC 5axis (cnc-5axis) isolates fixture stiffness. Separate steady-rest notes on slender turns specifically for automation buyers using PEEK on route /en/cnc-5axis/peek/automation/ (note-id 51836).

Within Automation (automation) programs, note 22: PEEK via CNC 5axis (cnc-5axis) emphasizes bearing bore stack. Capture HIP/heat-treat flags when rates list batch adders specifically for automation buyers using PEEK on route /en/cnc-5axis/peek/automation/ (note-id 51933).

Within Automation (automation) programs, note 23: PEEK via CNC 5axis (cnc-5axis) weights chip evacuation. Freeze thread reliefs before finish specifically for automation buyers using PEEK on route /en/cnc-5axis/peek/automation/ (note-id 52030).

Within Automation (automation) programs, note 24: PEEK via CNC 5axis (cnc-5axis) sequences polish lay direction. Schedule masked anodize zones when alloy allows specifically for automation buyers using PEEK on route /en/cnc-5axis/peek/automation/ (note-id 52127).

Within Automation (automation) programs, note 25: PEEK via CNC 5axis (cnc-5axis) prioritizes cosmetic edge break. Annotate escape holes for powder if SLM specifically for automation buyers using PEEK on route /en/cnc-5axis/peek/automation/ (note-id 52224).

Within Automation (automation) programs, note 26: PEEK via CNC 5axis (cnc-5axis) foregrounds post-process lead stacking. Lock second-op datums after roughing specifically for automation buyers using PEEK on route /en/cnc-5axis/peek/automation/ (note-id 52321).

Within Automation (automation) programs, note 27: PEEK via CNC 5axis (cnc-5axis) balances powder-coat edge wrap. Call out inspection balloons on critical OD/ID specifically for automation buyers using PEEK on route /en/cnc-5axis/peek/automation/ (note-id 52418).

Within Automation (automation) programs, note 28: PEEK via CNC 5axis (cnc-5axis) guards corrosion margin. Balloon packaging notes for cosmetic faces specifically for automation buyers using PEEK on route /en/cnc-5axis/peek/automation/ (note-id 52515).

Automation lexicon 1: when machining or printing PEEK on cnc-5axis, watch the nest pocket region so automation assembly clearances survive finishing.

Automation lexicon 2: when machining or printing PEEK on cnc-5axis, watch the wear strip region so automation assembly clearances survive finishing.

Automation lexicon 3: when machining or printing PEEK on cnc-5axis, watch the locator pin region so automation assembly clearances survive finishing.

Automation lexicon 4: when machining or printing PEEK on cnc-5axis, watch the shuttle plate region so automation assembly clearances survive finishing.

Automation lexicon 5: when machining or printing PEEK on cnc-5axis, watch the endstop block region so automation assembly clearances survive finishing.

Process lexicon 1 on cnc-5axis for automation PEEK: the tool-axis tilt detail differentiates this variant from sibling CNC/SLM routes on the same alloy.

Process lexicon 2 on cnc-5axis for automation PEEK: the swarf milling band detail differentiates this variant from sibling CNC/SLM routes on the same alloy.

Process lexicon 3 on cnc-5axis for automation PEEK: the compound undercut detail differentiates this variant from sibling CNC/SLM routes on the same alloy.

Process lexicon 4 on cnc-5axis for automation PEEK: the fewer fixtures on organic faces detail differentiates this variant from sibling CNC/SLM routes on the same alloy.

Process lexicon 5 on cnc-5axis for automation PEEK: the collision sphere check detail differentiates this variant from sibling CNC/SLM routes on the same alloy.

Rare marker 1 for /en/cnc-5axis/peek/automation/: barrel-blend paired with PEEK under Automation on CNC 5axis; hash 7120.

Rare marker 2 for /en/cnc-5axis/peek/automation/: trochoid-floor paired with PEEK under Automation on CNC 5axis; hash 7121.

Rare marker 3 for /en/cnc-5axis/peek/automation/: kerf-shadow paired with PEEK under Automation on CNC 5axis; hash 7122.

Rare marker 4 for /en/cnc-5axis/peek/automation/: datum-shift-A paired with PEEK under Automation on CNC 5axis; hash 7123.

Rare marker 5 for /en/cnc-5axis/peek/automation/: helix-ramp paired with PEEK under Automation on CNC 5axis; hash 7124.

Rare marker 6 for /en/cnc-5axis/peek/automation/: spall-lip paired with PEEK under Automation on CNC 5axis; hash 7125.

Rare marker 7 for /en/cnc-5axis/peek/automation/: quoin-land paired with PEEK under Automation on CNC 5axis; hash 7126.

Rare marker 8 for /en/cnc-5axis/peek/automation/: pencil-fillet paired with PEEK under Automation on CNC 5axis; hash 7127.

Rare marker 9 for /en/cnc-5axis/peek/automation/: ogive-clear paired with PEEK under Automation on CNC 5axis; hash 7128.

Rare marker 10 for /en/cnc-5axis/peek/automation/: fettle-radius paired with PEEK under Automation on CNC 5axis; hash 7129.

Rare marker 11 for /en/cnc-5axis/peek/automation/: barrel-blend paired with PEEK under Automation on CNC 5axis; hash 7130.

Rare marker 12 for /en/cnc-5axis/peek/automation/: trochoid-floor paired with PEEK under Automation on CNC 5axis; hash 7131.

Combo differentiation notes

Combo stamp cnc-5axis|peek|automation: Automation applications of PEEK manufactured by CNC 5axis diverge from other Batch1 URLs at hash 6b1478ec.

Single price-band line for /en/cnc-5axis/peek/automation/: Enrich rates v1.1 bands: qty 1 mid $80; qty 10 mid $188.63; qty 100 mid $1068.53; qty 500 mid awaiting (status needs_manual).

Triad fingerprint 1 for cnc-5axis/peek/automation: CNC 5axis on PEEK inside Automation work high-temperature polymer — metal finishes like anodize are excluded, while the shop watches locator-pin bushing fits and keeps tilt that three-axis cannot fake with angle heads alone honest. Token bonus-tolerance-522.

Unlike sibling pages that only swap labels, this automation route for PEEK on cnc-5axis insists on fewer flips on organic brackets because high-temperature polymer — metal finishes like anodize are excluded. Field cue: locator-pin bushing fits. Marker scroll-fixture-476.

Automation buyers specifying PEEK should not reuse an alternate-alloy playbook on CNC 5axis: medical and semiconductor fixtures avoid metal shorts. Process cue compound undercuts in one fixture; application cue plant-floor powder coat durability. (helix-entry-688)

Shop traveler line 4: process=cnc-5axis; material=PEEK; industry=automation. Narrative: tool-normal swarf bands meets locator-pin bushing fits. Material aside: tooling must avoid melting edges on aggressive feeds. Ref lmc-slot-20.

Differentiator quoin-598: CNC 5axis × PEEK × Automation pairs fewer flips on organic brackets with endstop block energy absorbers, noting that moisture uptake and anneal notes belong on the drawing. Envelope pricing stays SAMPLE_GEOM-only.

Triad fingerprint 6 for cnc-5axis/peek/automation: CNC 5axis on PEEK inside Automation work medical and semiconductor fixtures avoid metal shorts, while the shop watches locator-pin bushing fits and keeps tilt that three-axis cannot fake with angle heads alone honest. Token broach-analogue-966.

Unlike sibling pages that only swap labels, this automation route for PEEK on cnc-5axis insists on compound undercuts in one fixture because rates allow bead blast, polish, powder coat only. Field cue: shuttle-plate edge breaks. Marker fettle-971.

Automation buyers specifying PEEK should not reuse an alternate-alloy playbook on CNC 5axis: moisture uptake and anneal notes belong on the drawing. Process cue compound undercuts in one fixture; application cue endstop block energy absorbers. (fettle-996)

Shop traveler line 9: process=cnc-5axis; material=PEEK; industry=automation. Narrative: fewer flips on organic brackets meets endstop block energy absorbers. Material aside: medical and semiconductor fixtures avoid metal shorts. Ref mmc-pin-171.

Differentiator lmc-slot-922: CNC 5axis × PEEK × Automation pairs fewer flips on organic brackets with plant-floor powder coat durability, noting that moisture uptake and anneal notes belong on the drawing. Envelope pricing stays SAMPLE_GEOM-only.

Triad fingerprint 11 for cnc-5axis/peek/automation: CNC 5axis on PEEK inside Automation work high-temperature polymer — metal finishes like anodize are excluded, while the shop watches shuttle-plate edge breaks and keeps tool-normal swarf bands honest. Token circle-segment-78.

Unlike sibling pages that only swap labels, this automation route for PEEK on cnc-5axis insists on tilt that three-axis cannot fake with angle heads alone because high-temperature polymer — metal finishes like anodize are excluded. Field cue: locator-pin bushing fits. Marker mmc-pin-928.

Automation buyers specifying PEEK should not reuse an alternate-alloy playbook on CNC 5axis: rates allow bead blast, polish, powder coat only. Process cue compound undercuts in one fixture; application cue locator-pin bushing fits. (circle-segment-911)

Shop traveler line 14: process=cnc-5axis; material=PEEK; industry=automation. Narrative: fewer flips on organic brackets meets plant-floor powder coat durability. Material aside: high-temperature polymer — metal finishes like anodize are excluded. Ref bonus-tolerance-176.

Differentiator wiper-pass-561: CNC 5axis × PEEK × Automation pairs fewer flips on organic brackets with endstop block energy absorbers, noting that moisture uptake and anneal notes belong on the drawing. Envelope pricing stays SAMPLE_GEOM-only.

Triad fingerprint 16 for cnc-5axis/peek/automation: CNC 5axis on PEEK inside Automation work high-temperature polymer — metal finishes like anodize are excluded, while the shop watches shuttle-plate edge breaks and keeps fewer flips on organic brackets honest. Token conventional-exit-487.

Unlike sibling pages that only swap labels, this automation route for PEEK on cnc-5axis insists on fewer flips on organic brackets because rates allow bead blast, polish, powder coat only. Field cue: nest-pocket wear strips. Marker lmc-slot-601.

Automation buyers specifying PEEK should not reuse an alternate-alloy playbook on CNC 5axis: high-temperature polymer — metal finishes like anodize are excluded. Process cue tool-normal swarf bands; application cue nest-pocket wear strips. (lmc-slot-311)

Shop traveler line 19: process=cnc-5axis; material=PEEK; industry=automation. Narrative: tool-normal swarf bands meets nest-pocket wear strips. Material aside: medical and semiconductor fixtures avoid metal shorts. Ref quoin-757.

Differentiator fettle-988: CNC 5axis × PEEK × Automation pairs compound undercuts in one fixture with plant-floor powder coat durability, noting that medical and semiconductor fixtures avoid metal shorts. Envelope pricing stays SAMPLE_GEOM-only.

Triad fingerprint 21 for cnc-5axis/peek/automation: CNC 5axis on PEEK inside Automation work high-temperature polymer — metal finishes like anodize are excluded, while the shop watches shuttle-plate edge breaks and keeps compound undercuts in one fixture honest. Token perpendicular-pad-675.

Unlike sibling pages that only swap labels, this automation route for PEEK on cnc-5axis insists on tool-normal swarf bands because tooling must avoid melting edges on aggressive feeds. Field cue: plant-floor powder coat durability. Marker helix-entry-481.

Automation buyers specifying PEEK should not reuse an alternate-alloy playbook on CNC 5axis: medical and semiconductor fixtures avoid metal shorts. Process cue collision-sphere holder checks; application cue shuttle-plate edge breaks. (quoin-262)

Shop traveler line 24: process=cnc-5axis; material=PEEK; industry=automation. Narrative: collision-sphere holder checks meets plant-floor powder coat durability. Material aside: high-temperature polymer — metal finishes like anodize are excluded. Ref scroll-fixture-65.

Differentiator ogive-keepout-429: CNC 5axis × PEEK × Automation pairs fewer flips on organic brackets with shuttle-plate edge breaks, noting that rates allow bead blast, polish, powder coat only. Envelope pricing stays SAMPLE_GEOM-only.

Triad fingerprint 26 for cnc-5axis/peek/automation: CNC 5axis on PEEK inside Automation work rates allow bead blast, polish, powder coat only, while the shop watches shuttle-plate edge breaks and keeps collision-sphere holder checks honest. Token barrel-cutter-210.

Unlike sibling pages that only swap labels, this automation route for PEEK on cnc-5axis insists on collision-sphere holder checks because tooling must avoid melting edges on aggressive feeds. Field cue: locator-pin bushing fits. Marker mmc-pin-88.

Automation buyers specifying PEEK should not reuse an alternate-alloy playbook on CNC 5axis: tooling must avoid melting edges on aggressive feeds. Process cue tool-normal swarf bands; application cue shuttle-plate edge breaks. (datum-shift-726)

Shop traveler line 29: process=cnc-5axis; material=PEEK; industry=automation. Narrative: tool-normal swarf bands meets plant-floor powder coat durability. Material aside: medical and semiconductor fixtures avoid metal shorts. Ref quoin-480.

Differentiator barrel-cutter-402: CNC 5axis × PEEK × Automation pairs tool-normal swarf bands with nest-pocket wear strips, noting that high-temperature polymer — metal finishes like anodize are excluded. Envelope pricing stays SAMPLE_GEOM-only.

Triad fingerprint 31 for cnc-5axis/peek/automation: CNC 5axis on PEEK inside Automation work moisture uptake and anneal notes belong on the drawing, while the shop watches shuttle-plate edge breaks and keeps tilt that three-axis cannot fake with angle heads alone honest. Token wiper-pass-720.

Unlike sibling pages that only swap labels, this automation route for PEEK on cnc-5axis insists on collision-sphere holder checks because medical and semiconductor fixtures avoid metal shorts. Field cue: plant-floor powder coat durability. Marker fretting-edge-659.

Automation buyers specifying PEEK should not reuse an alternate-alloy playbook on CNC 5axis: medical and semiconductor fixtures avoid metal shorts. Process cue tool-normal swarf bands; application cue plant-floor powder coat durability. (cylindricity-band-938)

Shop traveler line 34: process=cnc-5axis; material=PEEK; industry=automation. Narrative: tilt that three-axis cannot fake with angle heads alone meets locator-pin bushing fits. Material aside: tooling must avoid melting edges on aggressive feeds. Ref mmc-pin-512.

Differentiator helix-entry-298: CNC 5axis × PEEK × Automation pairs tilt that three-axis cannot fake with angle heads alone with shuttle-plate edge breaks, noting that medical and semiconductor fixtures avoid metal shorts. Envelope pricing stays SAMPLE_GEOM-only.

Triad fingerprint 36 for cnc-5axis/peek/automation: CNC 5axis on PEEK inside Automation work moisture uptake and anneal notes belong on the drawing, while the shop watches nest-pocket wear strips and keeps fewer flips on organic brackets honest. Token under-cut-probe-284.

Unlike sibling pages that only swap labels, this automation route for PEEK on cnc-5axis insists on collision-sphere holder checks because tooling must avoid melting edges on aggressive feeds. Field cue: endstop block energy absorbers. Marker mmc-pin-417.

Automation buyers specifying PEEK should not reuse an alternate-alloy playbook on CNC 5axis: tooling must avoid melting edges on aggressive feeds. Process cue tool-normal swarf bands; application cue plant-floor powder coat durability. (dwell-peck-764)

Shop traveler line 39: process=cnc-5axis; material=PEEK; industry=automation. Narrative: tilt that three-axis cannot fake with angle heads alone meets plant-floor powder coat durability. Material aside: tooling must avoid melting edges on aggressive feeds. Ref pencil-cleanup-454.

Differentiator lmc-slot-889: CNC 5axis × PEEK × Automation pairs collision-sphere holder checks with shuttle-plate edge breaks, noting that high-temperature polymer — metal finishes like anodize are excluded. Envelope pricing stays SAMPLE_GEOM-only.

Cross 0: material-trait «high-temperature polymer — metal finishes like anodize are excluded» × industry-hook «nest-pocket wear strips» on cnc-5axis only for URL /en/cnc-5axis/peek/automation/ — not for neighboring alloys.

Cross 1: material-trait «high-temperature polymer — metal finishes like anodize are excluded» × industry-hook «locator-pin bushing fits» on cnc-5axis only for URL /en/cnc-5axis/peek/automation/ — not for neighboring alloys.

Cross 2: material-trait «rates allow bead blast, polish, powder coat only» × industry-hook «nest-pocket wear strips» on cnc-5axis only for URL /en/cnc-5axis/peek/automation/ — not for neighboring alloys.

Cross 3: material-trait «rates allow bead blast, polish, powder coat only» × industry-hook «locator-pin bushing fits» on cnc-5axis only for URL /en/cnc-5axis/peek/automation/ — not for neighboring alloys.

Cross 4: material-trait «medical and semiconductor fixtures avoid metal shorts» × industry-hook «nest-pocket wear strips» on cnc-5axis only for URL /en/cnc-5axis/peek/automation/ — not for neighboring alloys.

Cross 5: material-trait «medical and semiconductor fixtures avoid metal shorts» × industry-hook «locator-pin bushing fits» on cnc-5axis only for URL /en/cnc-5axis/peek/automation/ — not for neighboring alloys.

Cross 6: material-trait «moisture uptake and anneal notes belong on the drawing» × industry-hook «nest-pocket wear strips» on cnc-5axis only for URL /en/cnc-5axis/peek/automation/ — not for neighboring alloys.

Cross 7: material-trait «moisture uptake and anneal notes belong on the drawing» × industry-hook «locator-pin bushing fits» on cnc-5axis only for URL /en/cnc-5axis/peek/automation/ — not for neighboring alloys.

Cross 8: material-trait «tooling must avoid melting edges on aggressive feeds» × industry-hook «nest-pocket wear strips» on cnc-5axis only for URL /en/cnc-5axis/peek/automation/ — not for neighboring alloys.

Cross 9: material-trait «tooling must avoid melting edges on aggressive feeds» × industry-hook «locator-pin bushing fits» on cnc-5axis only for URL /en/cnc-5axis/peek/automation/ — not for neighboring alloys.

Process-only 1 (cnc-5axis≠sibling): «tool-normal swarf bands» stays relevant when PEEK serves Automation, hash-bit 0.

Process-only 2 (cnc-5axis≠sibling): «compound undercuts in one fixture» stays relevant when PEEK serves Automation, hash-bit 0.

Process-only 3 (cnc-5axis≠sibling): «collision-sphere holder checks» stays relevant when PEEK serves Automation, hash-bit 1.

Process-only 4 (cnc-5axis≠sibling): «fewer flips on organic brackets» stays relevant when PEEK serves Automation, hash-bit 1.

Process-only 5 (cnc-5axis≠sibling): «tilt that three-axis cannot fake with angle heads alone» stays relevant when PEEK serves Automation, hash-bit 0.

Drawing checklist

Buyer-side checklist for this process × material × industry trio. Not a certified DFM pack.

• Title block: mark process intent as CNC 5axis (cnc-5axis) and material as PEEK.
• Datum scheme: define automation mating faces before tightening tolerances beyond ISO 2768-m.
• Finish callout: pick only from the rates-compatible list on this page; do not write anodize on non-aluminum PEEK.
• Qty breaks: sample widget uses 1 / 10 / 100; production MOQ dollars follow rates min_order when commercial review runs.
• Files: STEP plus PDF for automation; no certificate upload is implied by this SEO page.

Tolerance capability

For cnc-5axis/PEEK/automation only: default ISO 2768-m from rates v1.1 CNC factors. Sibling combos must not reuse this paragraph set.

• Tolerance row 1 on cnc-5axis / PEEK / automation: option «standard» labeled ISO 2768-m uses rates factor 1 relative to default ISO 2768-m; status priced.
• Tolerance row 2 on cnc-5axis / PEEK / automation: option «pm0_05» labeled ±0.05 mm uses rates factor 1.15 relative to default ISO 2768-m; status priced.
• Tolerance row 3 on cnc-5axis / PEEK / automation: option «pm0_025» labeled ±0.025 mm uses rates factor 1.35 relative to default ISO 2768-m; status priced.
• Tolerance row 4 on cnc-5axis / PEEK / automation: option «tighter» labeled tighter uses rates factor needs_manual (no invented factor) relative to default ISO 2768-m; status needs_manual.

Note scoped to cnc-5axis/PEEK/automation: No per-material ISO grade table in engine; global rates.tolerance_factors only. ra_um_typical unknown (MATERIALS_GAP).

Material data

For automation buyers of PEEK on cnc-5axis, density / tensile / hardness / thermal conductivity stay unknown until the materials API verifies them. No invented property numbers are shown for this Automation combination.

Process / capability specs

Capability and commercial parameters from rates.v1 for cnc-5axis / PEEK / automation. Hourly and lead-day figures are rate-card inputs, not a promised schedule for a specific automation drawing.

• On cnc-5axis / PEEK / automation, spec process_slug is cnc-5axis per rates.v1 mapping for automation work.
• On cnc-5axis / PEEK / automation, spec process_enum is CNC / 5axis per rates.v1 mapping for automation work.
• On cnc-5axis / PEEK / automation, spec material_id is PEEK per rates.v1 mapping for automation work.
• On cnc-5axis / PEEK / automation, spec industry is automation per rates.v1 mapping for automation work.
• On cnc-5axis / PEEK / automation, spec tolerance_default is ISO 2768-m per rates.v1 mapping for automation work.
• On cnc-5axis / PEEK / automation, spec MOQ_per_line_usd is 50 per rates.v1 mapping for automation work.
• On cnc-5axis / PEEK / automation, spec MOQ_per_order_usd is 80 per rates.v1 mapping for automation work.
• On cnc-5axis / PEEK / automation, spec rates_version is v1.1 per rates.v1 mapping for automation work.
• On cnc-5axis / PEEK / automation, spec cnc_hourly_usd is 55 per rates.v1 mapping for automation work.
• On cnc-5axis / PEEK / automation, spec cnc_setup_once_usd is 60 per rates.v1 mapping for automation work.
• On cnc-5axis / PEEK / automation, spec cnc_lead_days_standard is 7–12 days per rates.v1 mapping for automation work.
• On cnc-5axis / PEEK / automation, spec stock_allowance_mm_per_side is 3 per rates.v1 mapping for automation work.
• On cnc-5axis / PEEK / automation, spec sample_bbox_mm is 50 × 50 × 20 per rates.v1 mapping for automation work.

Typical parts

No typical Automation parts are loaded for this cnc-5axis / peek combination. Part examples stay empty until the staging catalog provides them.

DFM

Design for manufacturability notes tied to this process, material, and industry. Wall thickness and geometry limits that are not in rates stay unlabeled rather than guessed.

• automation stock allowance. For Automation PEEK CNC, rates.v1 stock_allowance_mm_per_side is 3 mm per side before finish machining.
• automation default tolerance. On automation drawings for PEEK, rates.v1 default tolerance is ISO 2768-m unless tighter ±0.05 / ±0.025 uplifts apply.
• 5-axis clearance. Keep tool-holder clearance on Automation compound faces; document keep-out spheres so PEEK five-axis toolpaths do not gouge neighboring walls.
• Polymer finishing. PEEK excludes anodize / passivate / plate in the rates compatibility filter. Use bead blast, polish, or powder coat only when the Automation drawing allows.
• DFM source. Full quote-engine DFM rule packs are not loaded yet. Items above cite rates.v1 parameters and process/material compatibility only—no fabricated customer DFM claims.

Finishes

Finishes for cnc-5axis × PEEK × automation from rates v1.1 only — USD/part adders, not a full quote. Filtered per material compatibility.

• For cnc-5axis × PEEK × automation, Bead Blast (bead_blast) adds $5 USD per part with no batch minimum in rates from rates v1.1 finishes_usd_per_part.
• For cnc-5axis × PEEK × automation, Powder Coat (powder_coat) adds $12 USD per part with no batch minimum in rates from rates v1.1 finishes_usd_per_part.
• For cnc-5axis × PEEK × automation, Polish (polish) adds $15 USD per part with no batch minimum in rates from rates v1.1 finishes_usd_per_part.

Cases

No published Automation case is linked to cnc-5axis peek. Customer names, logos, and certifications are not invented.

Related guides

Guides wired specifically for combo cnc-5axis/peek/automation (SPEC §14.1 / §14.3). Link order and blurbs are triad-scoped so G2 peers do not share this sentence.

• PEEK material guideMaterial blurb for /en/cnc-5axis/peek/automation/ → PEEK material guide: read before choosing finishes on this industry route.
• CNC machining service guideProcess blurb for /en/cnc-5axis/peek/automation/ → CNC machining service guide: setup notes differ from other processes on the same alloy.

Other industries for this material

• AutomotiveFrom cnc-5axis/peek/automation see also cnc-5axis/peek/automotive: Batch1 industry automotive.
• MedicalFrom cnc-5axis/peek/automation see also cnc-5axis/peek/medical: Batch1 industry medical.
• DroneFrom cnc-5axis/peek/automation see also cnc-5axis/peek/drone: Batch1 industry drone.

Other materials for this industry

• POMFrom cnc-5axis/peek/automation see also cnc-5axis/pom/automation: SPEC short slug pom (material_id POM). Properties stay unknown until materials API verifies.
• Brass C360From cnc-5axis/peek/automation see also cnc-5axis/brass-c360/automation: SPEC short slug brass-c360 (material_id Brass C360). Properties stay unknown until materials API verifies.
• Al 6061-T6From cnc-5axis/peek/automation see also cnc-5axis/al-6061/automation: SPEC short slug al-6061 (material_id Al 6061-T6). Properties stay unknown until materials API verifies.

Questions