The short answer
A **bearing seat** in a CNC housing (the bore and shoulder that locate a rolling-element bearing) is not a generic hole with a press note, and it is not the same pack as [press-fit pins and bushings](https://3dwk.com/resources/press-fit-pins-bushings-cnc-housings). A usable callout names the **bore diameter and fit class** you actually need (for example a buyer-cited H7 housing seat—cite the class, do not assume a 3DWK default), the **width or depth to the shoulder**, **shoulder-face perpendicularity** or flatness if it locates the bearing, **bore form** (roundness or cylindricity), **surface roughness**, the **lead-in chamfer**, and any **retaining** feature on its own line. Silence on fit class versus “press the bearing,” or a bore that shares a general ISO 2768 medium envelope, is what widens many [quote-new.php](https://3dwk.com/quote-new.php) **rates.v1.1** estimate bands—not the extra boring minutes alone.
This guide is for buyers packaging aluminum housings that locate a bearing in a machined bore. Illustrations use an **Example part** only—not a customer gearbox, and not a fabricated fit or noise result. Sibling notes live in [press-fit versus slip-fit CNC bores](https://3dwk.com/resources/press-fit-vs-slip-fit-cnc-bores) and in [internal retaining-ring groove notes](https://3dwk.com/resources/internal-retaining-ring-groove-notes-cnc-bores); here we focus on **bearing-seat packaging**, not on pin fits, [O-ring grooves](https://3dwk.com/resources/o-ring-groove-callouts-cnc-housings), or [flange bolt circles](https://3dwk.com/resources/flange-bolt-circle-position-notes-cnc-housings).
What bearing seats mean for quoting
A **bearing-seat callout** says which member is controlled (usually the housing bore for a typical outer-ring seat), the fit class, the depth to the locating shoulder, and the form and finish the ring will see. Writing “bearing bore, press fit” or “Ø32 for bearing” is not enough. Process pages for aluminum housings ([CNC 3-axis Al 6061 automation](https://3dwk.com/en/cnc-3axis/al-6061/automation.html), [CNC 3-axis Al 6061 aerospace](https://3dwk.com/en/cnc-3axis/al-6061/aerospace.html), [CNC 5-axis Al 6061 aerospace](https://3dwk.com/en/cnc-5axis/al-6061/aerospace.html)) assume the seat pack is visible when lots mix clearance holes, pin bores, and bearing seats on the same housing family.
Do not bury “bearing as needed” inside a notes cloud. Put **BEARING SEAT Ø32 H7 (CLASS CITED), DEPTH TO SHOULDER NAMED, SHOULDER ⟂ DATUM A, CYLINDRICITY / RA NAMED, LEAD-IN CHAMFER, RING GROOVE ON ITS OWN LINE IF USED** on the PDF and mirror it in RFQ text. If a bore is only a clearance or a slip tube, do not call it a bearing seat. Background: [reaming versus boring for hole size](https://3dwk.com/resources/reaming-vs-boring-cnc-hole-size), [five-axis aluminum housing design tips](https://3dwk.com/resources/five-axis-aluminum-housing-design-tips), [what files to send for a CNC quote](https://3dwk.com/resources/what-files-to-send-for-cnc-quote).
Fit class and which member is controlled
Name the diameter and the fit class together, and say whether the housing or the shaft ring is the controlled member. An H7-style housing seat and a tighter interference class are not interchangeable leftovers; write the class you need rather than “press bearing.” This guide does not invent a recommended fit, a mounting force, or a 3DWK-guaranteed clearance. If the seat is finished by [honing after boring](https://3dwk.com/resources/when-is-honing-needed-after-cnc-boring), say so on its own line with the stock you will leave.
Shoulder, lead-in, and retainers
The shoulder is part of the seat. Name the depth (or the remaining width of the bore), and call perpendicularity or flatness of the locating face if the bearing stacks against it. A generous chamfer or radius at the lead-in belongs on the drawing so the ring does not start on a sharp corner. If a snap ring retains the bearing, use the internal-groove guide and keep that groove as a separate pack—do not hide it inside the bore diameter.
Tolerance and inspection traps
Calling “press the bearing,” leaving the fit class silent, applying a general [ISO 2768](https://3dwk.com/resources/iso-2768-general-tolerances-cnc-rfq) envelope to a precision seat, or omitting cylindricity and [Ra](https://3dwk.com/resources/surface-roughness-ra-callouts-that-raise-quotes) on the bore, all force **needs_manual**. Related form language lives in [circularity versus cylindricity](https://3dwk.com/resources/circularity-vs-cylindricity-cnc-shafts) and in [datum schemes for multi-setup parts](https://3dwk.com/resources/datum-schemes-for-multi-setup-cnc-parts). Do not use “bearing must spin freely” as the only acceptance note. Related: [what needs_manual means](https://3dwk.com/resources/what-needs-manual-means-preliminary-quote).
Illustration 1 shows an **Example part** Al 6061 housing with a labeled Ø32 H7 bearing seat, depth to the shoulder, shoulder perpendicular to datum A, cylindricity and Ra named, a lead-in chamfer, and a snap-ring groove called out on its own line.
Example part walkthrough
**Example part:** Aluminum 6061-T6 housing ~80 × 60 × 40 mm, bearing seat Ø32 with a buyer-cited H7 class, depth to shoulder named, shoulder perpendicular to datum A, cylindricity and Ra named, lead-in chamfer, optional internal ring groove on its own line, no invented 3DWK fit, mounting force, or noise result. With STEP + **BEARING SEAT Ø32 H7 CITED, DEPTH TO SHOULDER NAMED, SHOULDER ⟂ A, FORM AND RA NAMED, LEAD-IN CHAMFER**, expect a usable automatic planning band on [quote-new.php](https://3dwk.com/quote-new.php). Same geometry with silent “Ø32 press bearing, must run quietly” often lands DFM notes or **needs_manual**—without inventing any customer PO, fit certificate, or a 3DWK-guaranteed bearing life.
Illustration 2 contrasts a vague RFQ (“press the bearing”) versus a labeled fit-form-shoulder pack and the clearer estimate path.
What widens bands fastest
Unlabeled “press bearing” notes, a diameter without a class, a silent shoulder, form and Ra left to a general tolerance block, and a snap-ring groove that is never dimensioned. Quantity breaks do not erase seat-pack ambiguity—see [how quantity breaks change CNC unit cost](https://3dwk.com/resources/how-quantity-breaks-change-cnc-unit-cost) and [6061 versus 7075](https://3dwk.com/resources/6061-vs-7075-aluminum-for-machined-parts).
What to do next
Mark each bearing seat with **diameter and fit class, depth to the shoulder, shoulder geometry, form, Ra, lead-in, and any retainer on its own line**, then upload on [quote-new.php](https://3dwk.com/quote-new.php). Packaging checklist: which member is controlled, and whether honing or a grind of the seat is part of the pack. Service pages: [CNC machining](https://3dwk.com/cnc-machining-service.php), [materials](https://3dwk.com/materials.php). Treat **rates.v1.1** min/mid/max as estimates, not invoices. If the UI shows **needs_manual**, answer the seat-family questions rather than forcing a fake price.
Common questions
Is a bearing seat just a press-fit bore?
Not by itself. A bearing seat adds a locating shoulder, form and finish on the ring diameter, a lead-in, and usually a named fit class. A pin-press note does not package those items.
Can I leave the seat on ISO 2768 medium?
A general medium envelope is usually the wrong home for a bearing diameter. Cite the fit class and the form/Ra you need, and keep ISO 2768 for non-critical features.
How does a snap-ring groove interact with the seat?
It is a second pack: width, groove diameter, and location, as in the internal-groove guide. Do not assume a groove appears just because a bearing is retained.
How should I inspect the seat?
Call out the bore size to the cited class, the depth to the shoulder, and the form and Ra on the same datums used to locate the housing. Do not leave “bearing must spin” as the only acceptance note.
