Design Guides

Lip-seal groove notes on CNC shafts

Lip-seal groove notes on CNC shafts: location, size, standard, keep-outs and rates.v1.1 estimate packaging—Example part only.

By 3DWK Engineering Team · · 6 min read

Example part SS 304 shaft map showing a labeled lip-seal land on journal B, axial station and width cited, optional groove cited, standard cited, kept clear of journal A and a ring groove
Illustration: 3DWK original diagram (typical values, not to scale).

The short answer

A **lip-seal groove** or seal land on a CNC shaft is not a [face groove for a rotary seal](https://3dwk.com/resources/face-groove-notes-cnc-rotary-seals), not an [O-ring groove](https://3dwk.com/resources/o-ring-groove-callouts-cnc-housings), and not a [retaining-ring groove](https://3dwk.com/resources/retaining-ring-groove-notes-cnc-shafts). A usable callout says **which diameter**, the **axial location and land width**, the **groove or undercut size the drawing actually controls**, any **lead-in** the seal needs, and **keep-outs** from journals, ring grooves, and threads. Silence, or “add a lip-seal groove,” is what widens many [quote-new.php](https://3dwk.com/quote-new.php) **rates.v1.1** estimate bands—not the turning minutes alone.

This guide is for buyers packaging turned shafts that a radial lip seal will run on or locate against. Illustrations use an **Example part** only—not a customer shaft, and not a fabricated seal or housing photo. Sibling notes cover face grooves, O-ring grooves, and ring grooves; here the focus is the shaft-side lip-seal land and any adjacent groove.

What lip-seal grooves on CNC shafts mean for quoting

A **lip-seal pack** names the journal or land the seal will run on, the axial station and width, any groove or undercut next to that land, the standard or size the buyer actually uses, and surface or lead-in notes you already require. Writing “groove for oil seal” or “standard lip-seal groove” is not enough. Process pages for common turned shafts ([CNC turning SS 304 automation](https://3dwk.com/en/cnc-turning/ss-304/automation.html), [CNC turning SS 304](https://3dwk.com/en/cnc-turning/ss-304.html), [CNC turning SS 304 robotics](https://3dwk.com/en/cnc-turning/ss-304/robotics.html)) assume that pack is visible when lots mix plain journals, [retaining-ring grooves](https://3dwk.com/resources/retaining-ring-groove-notes-cnc-shafts), and seal lands.

Do not bury “lip-seal groove as needed” inside a notes cloud. Put **LIP-SEAL LAND ON ØB, AXIAL STATION AND WIDTH CITED, GROOVE OR UNDERCUT SIZE CITED IF REQUIRED, STANDARD OR SIZE CITED, LEAD-IN CITED IF REQUIRED, KEEP CLEAR OF JOURNAL A AND THE RETAINING-RING GROOVE** on the PDF and mirror it in RFQ text. If the shaft must stay a plain journal—no seal land and no groove—say **NO LIP-SEAL GROOVE / NO SEAL LAND** so the shop does not invent a recess. Background: [what files to send for a CNC quote](https://3dwk.com/resources/what-files-to-send-for-cnc-quote), [turned stainless shaft drawing guide](https://3dwk.com/resources/turned-stainless-shaft-drawing-guide).

Vague lip-seal-groove RFQ versus labeled location-size-standard pack — Example part
Illustration: 3DWK original diagram (typical values, not to scale).

Location, size, and standard

Name the diameter the seal lip will run on, the distance from a datum or shoulder, and the width of the land. If a groove, slinger recess, or undercut sits next to that land, write **its width and depth (or the remaining diameter) on the PDF**. If you use a published radial-shaft-seal or groove standard, write the **document and size designation you actually use**. This guide does not invent a default seal diameter, a groove width, a surface-texture number, a lead-in angle, or a 3DWK-standard lip-seal groove.

A [face groove](https://3dwk.com/resources/face-groove-notes-cnc-rotary-seals) lives on an axial face; an [O-ring groove](https://3dwk.com/resources/o-ring-groove-design-cnc-housings) is a different elastomer seat, often in a housing. Do not let a lip-seal note replace those features, and do not treat a [retaining-ring groove](https://3dwk.com/resources/retaining-ring-groove-notes-cnc-shafts) as a seal groove.

Keep-outs and mating hardware

Give a minimum land to adjacent ring grooves, threads, bearing journals, and shoulders so the seal diameter is not broken by a second undercut. If the housing and seal already exist, still put the shaft dimensions on the shaft PDF rather than “match the seal.” A sharp corner at the lead-in is a different RFQ from a cited chamfer or radius.

Surface texture, hardness, or plating under the lip, when the program requires them, belong as **cited requirements**—not as implied 3DWK defaults. Do not invent a finish or hardness number here.

Tolerance and inspection traps

Calling “lip-seal groove as needed,” asking for a “standard oil-seal groove” with no document or size, or leaving the running diameter and lead-in silent, all force **needs_manual**. Default a smooth journal to an explicit no-seal-groove note; do not let “for lip seal” appear as an implied undercut. Related: [what needs_manual means](https://3dwk.com/resources/what-needs-manual-means-preliminary-quote).

Illustration 1 shows an **Example part** SS 304 shaft with a labeled lip-seal land on ØB, axial station and width cited, an optional adjacent groove called out only if required, standard or size cited by the buyer, and keep-outs from journal A and a ring groove.

Example part walkthrough

**Example part:** SS 304 turned shaft, lip-seal land required on ØB at a cited station and width, adjacent groove or undercut only if a second callout names size, buyer seal or groove standard cited, lead-in cited if required, keep clear of journal A and the ring groove, no invented default seal size or 3DWK groove recipe. With STEP + **LIP-SEAL LAND ON ØB, STATION / WIDTH CITED; STANDARD CITED; KEEP CLEAR OF A AND THE GROOVE**, expect a usable automatic planning band on [quote-new.php](https://3dwk.com/quote-new.php). Same geometry with silent “add a lip-seal groove as needed” often lands DFM notes or **needs_manual**—without inventing any customer seal lot, housing bore, or a 3DWK-guaranteed leak rate.

Illustration 2 contrasts a vague RFQ (“groove for oil seal”) versus a labeled location-size-standard pack and the clearer estimate path.

What widens bands fastest

Unlabeled “as needed” lip-seal grooves, a “standard seal groove” note with no document or size, lead-in left silent against a sharp shoulder, and keep-outs omitted next to ring grooves or threads. Quantity breaks do not erase feature-pack ambiguity—see [how quantity breaks change CNC unit cost](https://3dwk.com/resources/how-quantity-breaks-change-cnc-unit-cost).

What to do next

Mark each seal land with **location, land width, any groove size, the standard or size you use, lead-in if required, and keep-outs**, then upload the CAD on [quote-new.php](https://3dwk.com/quote-new.php). Packaging checklist: this is not a face groove, not an O-ring groove, and not a retaining-ring groove. Service pages: [CNC machining](https://3dwk.com/cnc-machining-service.php), [materials](https://3dwk.com/materials.php). Treat **rates.v1.1** min/mid/max as estimates, not invoices. If the UI shows **needs_manual**, answer the lip-seal-pack questions rather than forcing a fake price.

Common questions

Is a lip-seal groove the same as an O-ring groove or a face groove?

No. An O-ring groove is a different elastomer seat, often in a housing. A face groove sits on an axial face for a face-running seal. A shaft lip-seal pack is the running land, and any adjacent groove, that a radial lip seal uses. Package each feature on its own line.

Can 3DWK just use a standard seal-groove size?

Cite the standard and size designation you need on the PDF. This guide does not invent a default diameter, width, texture, or lead-in as a 3DWK guarantee.

Can the seal land break into a ring groove or a thread?

Only if you say so. A default keep-out is safer: give a minimum land to the ring groove, the thread, and any bearing journal. If a short stack has no room, write the allowed exception on the PDF.

How should I inspect the land?

Call out the controlled running diameter, the axial station and width, any groove size, and the lead-in if you require one. Do not leave “for lip seal” as the only acceptance note.

Free DFM · 24h quote

Upload CAD → free DFM report

Email required. You get a link to a rule-based manufacturability checklist (not a formal engineering sign-off). Engineers still review pricing.

No CAD? Photo / description → 24h quote

Three fields only — we reply within 24 hours.

Next step

Questions about your design?

Upload CAD files and an engineer will review manufacturability with your quote.

Upload CAD