The short answer
**Nitriding** after CNC steel is not a synonym for through-hardening [heat treat](https://3dwk.com/resources/when-to-specify-heat-treat-after-cnc), not a substitute for [shot peening](https://3dwk.com/resources/when-to-specify-shot-peen-after-cnc-steel), and not a cosmetic cousin of [zinc phosphate](https://3dwk.com/resources/when-to-specify-zinc-phosphate-after-cnc-steel) or [zinc plating, electroless nickel, or black oxide](https://3dwk.com/resources/zinc-plating-vs-electroless-nickel-vs-black-oxide). A usable callout says **whether nitriding is required**, the **process class or standard you actually use**, the **sequence** versus rough machine, grind, and any temper or stress relief, and **what is masked**. Silence, or a note that only says “nitride as needed,” is what widens many [quote-new.php](https://3dwk.com/quote-new.php) **rates.v1.1** estimate bands—not the furnace hours alone.
This guide is for buyers packaging CNC steel parts that need a named case-hardening step on wear or fatigue surfaces. Illustrations use an **Example part** only—not a customer shaft, and not a fabricated hardness certificate or case-depth chart. Sibling notes cover heat treat, peening, and conversion coats; here we focus on **when a nitriding pack is worth calling out**.
What nitriding after CNC steel means for quoting
A **nitriding pack** names that a case is required, which process family or buyer standard applies (gas, plasma/ion, or a salt-bath class—only if that is what you use), the sequence relative to machining and grinding, and which faces stay masked or must remain core-soft. Writing “nitride as needed” or “case harden for wear” is not enough. Process pages for common CNC steel ([CNC 3-axis Steel 1018 aerospace](https://3dwk.com/en/cnc-3axis/steel-1018/aerospace.html), [CNC 3-axis Steel 1018 tooling](https://3dwk.com/en/cnc-3axis/steel-1018/tooling.html), [CNC 3-axis Steel 1018](https://3dwk.com/en/cnc-3axis/steel-1018.html)) assume the pack is visible when lots mix bare as-machined steel, through-hardened parts, and nitrided wear faces. Batch1 pages for 4140 combinations are not live, so this Example part is packaged on the live Steel 1018 siblings; treat nitriding as a specified case-hardening step, not as a default process on mild 1018, and still name the actual steel grade on the PDF if the part is an alloy.
Do not bury “nitride for hardness” inside a notes cloud. Put **NITRIDING: REQUIRED; PROCESS CLASS OR STANDARD CITED; AFTER ROUGH MACHINE AND BEFORE / AFTER GRIND AS WRITTEN; MASK THREADS AND DATUM A** on the PDF and mirror it in RFQ text. If no nitriding is required, say **NO NITRIDING; HEAT TREAT OR OTHER CONDITION CITED IF ANY** so the shop does not have to guess. Background: [what files to send for a CNC quote](https://3dwk.com/resources/what-files-to-send-for-cnc-quote), [MPI notes](https://3dwk.com/resources/when-to-specify-mpi-after-cnc-steel).
When the nitriding pack is worth calling out
Specify nitriding when a wear, anti-gall, or fatigue program actually requires a diffusion case, and when you are prepared to cite the process class or standard the program uses. Skip a blanket nitride on a prototype still “as machined,” and do not use nitriding as a substitute for [shot peen](https://3dwk.com/resources/when-to-specify-shot-peen-after-cnc-steel), a [hydrogen bake](https://3dwk.com/resources/when-to-specify-he-bake-after-plated-cnc-steel) after plating, or a paint-base phosphate.
If you cite a class, a compound-layer requirement, or a buyer specification, write the **document and class on the PDF**. This guide does not invent a case depth, a surface-hardness curve, a white-layer limit, or a 3DWK-standard nitriding recipe. Material cost is rarely the nitriding-pack story under **rates.v1.1**—sequence, masks, and the named class are.
Sequence, masking, and grinding
Name the order: rough machine, any pre-nitride stress relief if you require it, nitriding, then grind or hone of journals if those diameters are finished after the case—or write that the case is applied after final grind if that is the intent. Nitriding before a grind of datum A is a different RFQ from nitriding after the grind. Mask threads, tight datums, and faces that must stay free of case, using an explicit **MASK** list. [Magnetic-particle inspection](https://3dwk.com/resources/when-to-specify-mpi-after-cnc-steel), when required, belongs on its own line; it is not implied by a nitride note.
Tolerance and inspection traps
Calling “nitride as needed,” asking to “harden the surface” with no process family, or demanding a case depth or hardness result without a method or class, all force **needs_manual**. Default a mild-steel bracket that only needs paint or phosphate to an explicit no-nitride pack; do not let nitriding appear as an implied wear upgrade. Related: [what needs_manual means](https://3dwk.com/resources/what-needs-manual-means-preliminary-quote).
Illustration 1 shows an **Example part** Steel 1018 wear plate with labeled nitriding required, process class cited by the buyer, sequence versus rough machine and grind, and threads plus datum A masked, versus as-machined faces left untreated.
Example part walkthrough
**Example part:** Steel 1018 plate with two wear faces, nitriding required, buyer process class or standard cited, after rough machine and before grind of datum A, threads and datum A masked, no invented case depth, hardness number, or 3DWK furnace recipe. With STEP + **NITRIDING REQUIRED; CLASS CITED; AFTER ROUGH MACHINE, BEFORE GRIND OF DATUM A; MASK THREADS AND A**, expect a usable automatic planning band on [quote-new.php](https://3dwk.com/quote-new.php). Same geometry with silent “nitride as needed for wear” often lands DFM notes or **needs_manual**—without inventing any customer PO, case-depth certificate, or a 3DWK-guaranteed hardness result.
Illustration 2 contrasts a vague RFQ (“nitride as needed”) versus a labeled class-sequence-mask pack and the clearer estimate path.
What widens bands fastest
Unlabeled “as needed” nitriding, a “harden for wear” note that never names the process family, masks left silent on threads and datums, and a case-depth demand with no method. Quantity breaks do not erase finish-pack ambiguity—see [how quantity breaks change CNC unit cost](https://3dwk.com/resources/how-quantity-breaks-change-cnc-unit-cost).
What to do next
Mark the RFQ with **required or not, the process class or standard you use, sequence versus machine and grind, and masks**, then upload the CAD on [quote-new.php](https://3dwk.com/quote-new.php). Packaging checklist: nitriding is not through-harden, not peen, not phosphate, and not plate; keep those notes on their own lines. Service pages: [CNC machining](https://3dwk.com/cnc-machining-service.php), [materials](https://3dwk.com/materials.php). Treat **rates.v1.1** min/mid/max as estimates, not invoices. If the UI shows **needs_manual**, answer the nitriding-pack questions rather than forcing a fake price.
Common questions
Is nitriding the same as through-hardening heat treat?
No. Through-hardening changes the core; nitriding is a diffusion case on the surface, when the steel and the cited class support it. If you need a through-hardened condition, package a heat-treat callout, not a nitride note.
Does every steel wear part need nitriding?
No. Specify it when the program actually requires that case. An as-machined or painted prototype should not inherit a “nitride as needed” note by default, and mild 1018 is not automatically a nitriding grade.
Can 3DWK just use a standard case depth?
Cite the standard and class you need on the PDF. This guide does not invent a case depth, a hardness curve, or a furnace recipe as a 3DWK guarantee.
Where does grinding sit versus nitriding?
Write the order. Journals finished after the case are a different pack from parts nitrided after final grind. Mask any face that must stay free of case, and keep MPI, peen, and plate notes separate.
