Quality and Inspection

When to specify salt-spray testing after plated CNC steel

When to specify salt-spray testing after plated CNC steel: hours, white vs red rust and rates.v1.1 estimate packaging—Example part only.

By 3DWK Engineering Team · · 5 min read

Example part steel bracket map showing labeled ISO 9227 NSS 72 h on zinc-plated faces A and C versus cosmetic face D left to visual checks
Illustration: 3DWK original diagram (typical values, not to scale).

The short answer

**Salt-spray testing** after plated CNC steel is not a default “corrosion check,” and hours in a cabinet are not a one-to-one outdoor life. A usable callout names the **method** (commonly ISO 9227 NSS or ASTM B117), the **hours**, what counts as a fail (**white rust** on the coating versus **red rust** of the steel), which faces are in the lot, and the **sequence**—usually after plate and chromate or sealer, not before. Silence on hours and acceptance is what widens many [quote-new.php](https://3dwk.com/quote-new.php) **rates.v1.1** estimate bands—not the cabinet time alone.

This guide is for buyers packaging zinc-plated or similarly coated 1018-class steel where the RFQ says only “salt spray as needed.” Illustrations use an **Example part** only—not a customer bracket and not a certificate. Sibling notes live in [zinc plating versus electroless nickel versus black oxide](https://3dwk.com/resources/zinc-plating-vs-electroless-nickel-vs-black-oxide) and [plating thickness versus tolerance stack](https://3dwk.com/resources/plating-thickness-cnc-tolerance-stack); here we focus on **when a salt-spray pack is worth calling out**, not on inventing a finish or a pass hour.

What salt-spray after plating means for quoting

A **salt-spray callout** names the method, the exposure hours, the acceptance (hours to white corrosion, hours to red rust, or both), the faces or lot sample, and whether rack marks or cut edges are excluded. It also sits in a sequence: machine, clean, plate, chromate or seal, then test—not “inspect whenever.” Writing “salt spray to industry standard” is not enough. Process pages for 1018 milling ([CNC 3-axis Steel 1018 tooling](https://3dwk.com/en/cnc-3axis/steel-1018/tooling.html), [CNC 3-axis Steel 1018 aerospace](https://3dwk.com/en/cnc-3axis/steel-1018/aerospace.html), [CNC 3-axis Steel 1018](https://3dwk.com/en/cnc-3axis/steel-1018.html)) assume the coating and the test pack are visible when lots mix bare steel, black oxide, and zinc plate.

Do not bury “corrosion test as needed” inside a notes cloud. Put **SALT SPRAY: ISO 9227 NSS, 72 H, NO RED RUST ON FACES A AND C; WHITE RUST RECORDED, NOT A FAIL; AFTER ZINC + CLEAR CHROMATE** on the PDF and mirror it in RFQ text. Background: [first-article inspection reports](https://3dwk.com/resources/first-article-inspection-reports), [what files to send for a CNC quote](https://3dwk.com/resources/what-files-to-send-for-cnc-quote), [CMM sampling plans](https://3dwk.com/resources/cmm-sampling-plans-for-cnc-lots).

Vague salt-spray-as-needed RFQ versus labeled method-hours-sequence pack — Example part
Illustration: 3DWK original diagram (typical values, not to scale).

When the test is worth calling out

Specify salt spray when a plated steel part has a written corrosion requirement, when two finish options must be compared on the same geometry, or when a first-article lot must show that the chosen zinc, zinc-nickel, or other coat and sealer actually ran. Skip a blanket cabinet test on a prototype whose finish is still “as needed,” and do not use salt-spray hours as a substitute for naming the [coating family](https://3dwk.com/resources/zinc-plating-vs-electroless-nickel-vs-black-oxide).

Black oxide and bare machined steel are not the same system as zinc plus chromate; do not copy a 72 h zinc note onto oxide. Hydrogen-relief baking on high-strength steel is a different pack—mention it only when the grade actually needs it, and do not hide it inside the salt-spray line.

Steel 1018 bar and plate $/kg planning bands sit in the common CNC carbon-steel range under **rates.v1.1** material tables; material cost is rarely the test-pack story—finish family, hours, and sample size are.

Sequence, racking, and sample size

Name the sequence relative to plating and any sealer, how many pieces (or what fraction of the lot) go in the cabinet, and whether rack or contact marks are excluded. A test run before chromate, or after assembly with unstated hardware, is a different RFQ. Keep [MPI](https://3dwk.com/resources/when-to-specify-mpi-after-cnc-steel) or [dye-penetrant](https://3dwk.com/resources/when-to-specify-dye-penetrant-after-cnc) notes on their own lines so NDT is not mistaken for a corrosion test.

Tolerance and inspection traps

Calling “salt spray as needed,” asking for a pass hour with no method or fail definition, or applying the test to faces that will be painted later, all force **needs_manual**. Default cosmetic-only parts to a named coating and skip the cabinet; reserve hours and white-versus-red criteria for faces that actually carry the requirement. Related: [ISO 2768 general tolerances on CNC RFQs](https://3dwk.com/resources/iso-2768-general-tolerances-cnc-rfq), [what needs_manual means](https://3dwk.com/resources/what-needs-manual-means-preliminary-quote).

Illustration 1 shows an **Example part** 1018 bracket with labeled NSS 72 h on zinc-plated faces A and C versus a cosmetic face D left to visual checks only.

Example part walkthrough

**Example part:** Steel 1018 bracket ~80 × 50 × 8 mm, zinc plate plus clear chromate, ISO 9227 NSS 72 h with no red rust on faces A and C, white rust recorded but not a fail, after plate and chromate, rack marks excluded, ISO 2768-m general on the machined dimensions. With STEP + **NSS 72 H, NO RED RUST ON A/C, AFTER ZINC + CLEAR CHROMATE**, expect a usable automatic planning band on [quote-new.php](https://3dwk.com/quote-new.php). Same geometry with silent “salt spray as needed, industry standard hours” often lands DFM notes or **needs_manual**—without inventing any customer PO or certificate.

Illustration 2 contrasts a vague RFQ (“corrosion test as needed”) versus a labeled method-hours-sequence pack and the clearer estimate path.

What widens bands fastest

Unlabeled “as needed” tests, hours with no method, white rust treated as an unstated fail, and a cabinet run demanded before the coating family is named. Quantity breaks help unit minutes but do not erase test-pack ambiguity—see [how quantity breaks change CNC unit cost](https://3dwk.com/resources/how-quantity-breaks-change-cnc-unit-cost) and [plating thickness versus tolerance](https://3dwk.com/resources/plating-thickness-cnc-tolerance-stack).

What to do next

Mark the RFQ with a **method, hours, white-versus-red acceptance, faces, and sequence after plating**, then upload on [quote-new.php](https://3dwk.com/quote-new.php). Packaging checklist: coating family first, then the cabinet pack, then any NDT on its own line. Service pages: [CNC machining](https://3dwk.com/cnc-machining-service.php), [materials](https://3dwk.com/materials.php). Treat **rates.v1.1** min/mid/max as estimates, not invoices. If the UI shows **needs_manual**, answer the test-pack questions rather than forcing a fake price.

Common questions

Do salt-spray hours equal outdoor life?

No. NSS is an accelerated cabinet test. Use it to check a named coating and sealer against a written hour-and-acceptance pack, not as a weather forecast.

Is white rust the same fail as red rust?

Not unless you say so. White corrosion is usually the zinc layer; red rust is the steel. Many packs record white rust and fail only on red rust of labeled faces. Write the rule.

Should every zinc-plated prototype go in the cabinet?

No. If the finish is still a placeholder, name the coating first. Add salt spray when a requirement, a first article, or a finish comparison actually needs it.

Where does baking for hydrogen relief fit?

Only on grades that need it, as its own sequence note—not hidden inside the salt-spray line, and not copied onto mild 1018 by default.

Free DFM · 24h quote

Upload CAD → free DFM report

Email required. You get a link to a rule-based manufacturability checklist (not a formal engineering sign-off). Engineers still review pricing.

No CAD? Photo / description → 24h quote

Three fields only — we reply within 24 hours.

Next step

Questions about your design?

Upload CAD files and an engineer will review manufacturability with your quote.

Upload CAD