Quality and Inspection

When to specify shot peening after CNC steel parts

When to specify shot peening after CNC steel parts: coverage, sequence and rates.v1.1 estimate packaging—Example part only.

By 3DWK Engineering Team · · 6 min read

Example part steel bracket map showing labeled shot peen on faces A and C after heat treat, with M8 threads and journal B masked
Illustration: 3DWK original diagram (typical values, not to scale).

The short answer

**Shot peening** after CNC steel is not a default cosmetic blast, and it is not a synonym for [heat treat](https://3dwk.com/resources/when-to-specify-heat-treat-after-cnc), [MPI](https://3dwk.com/resources/when-to-specify-mpi-after-cnc-steel), [salt-spray testing](https://3dwk.com/resources/when-to-specify-salt-spray-after-plated-cnc-steel), or [HIP](https://3dwk.com/resources/when-to-specify-hip-after-slm-parts). A usable callout says **whether peening is required**, **which faces are peened**, **what is masked**, the **sequence** versus machine, heat treat, and plate, and the **method the buyer wants cited** for coverage and intensity. 3DWK will not invent Almen values or a coverage percentage as a certified process guarantee; if your program needs a named method, write that method on the drawing. Silence, or a note that only says “shot peen as needed,” is what widens many [quote-new.php](https://3dwk.com/quote-new.php) **rates.v1.1** estimate bands—not the peen cycle alone.

This guide is for buyers packaging fatigue-critical CNC steel where a peen may be part of the purchase pack. Illustrations use an **Example part** only—not a customer link and not a process certificate. Sibling notes live in [heat treating steel after CNC machining](https://3dwk.com/resources/heat-treating-steel-after-cnc-machining) and in [when to specify 4140 steel](https://3dwk.com/resources/when-to-specify-4140-steel-for-cnc-parts); here we focus on **when a shot-peen pack is worth calling out**.

What shot peening after CNC steel means for quoting

A **shot-peen callout** names that peening is required on labeled faces, that threads, sealing lands, or bearing journals are masked or left out, the sequence relative to heat treat and any plate, and the buyer-cited method for coverage and intensity when the program actually requires one. Writing “shot peen as needed” or “industry standard Almen” is not enough. Process pages for CNC steel milling ([CNC 3-axis Steel 1018 aerospace](https://3dwk.com/en/cnc-3axis/steel-1018/aerospace.html), [CNC 3-axis Steel 1018 tooling](https://3dwk.com/en/cnc-3axis/steel-1018/tooling.html), [CNC 3-axis Steel 1018](https://3dwk.com/en/cnc-3axis/steel-1018.html)) assume the peen pack is visible when lots mix as-machined, heat-treated, peened, and plated steel.

Do not bury “peen as needed” inside a notes cloud. Put **SHOT PEEN: REQUIRED ON FACES A AND C AFTER HEAT TREAT, BEFORE PLATE; MASK M8 THREADS AND JOURNAL B; CITE THE BUYER METHOD FOR COVERAGE AND INTENSITY ON THE PDF** on the drawing and mirror it in RFQ text. If no peen is required, say **NO SHOT PEEN** so the shop does not have to guess. Background: [first-article inspection reports](https://3dwk.com/resources/first-article-inspection-reports), [what files to send for a CNC quote](https://3dwk.com/resources/what-files-to-send-for-cnc-quote), [DFM checklist before an online CNC quote](https://3dwk.com/resources/dfm-checklist-before-online-cnc-quote).

Vague peen-as-needed RFQ versus labeled zone-mask-sequence pack — Example part
Illustration: 3DWK original diagram (typical values, not to scale).

When the peen is worth calling out

Specify shot peening when a steel part is fatigue-critical, when a program actually requires a peened surface, or when a first-article lot must show that the named faces were peened after heat treat. Skip a blanket peen on a prototype whose duty is still “as needed,” and do not use shot peen as a substitute for naming a heat-treat condition or a coating. A cosmetic bead blast is a different pack; do not paste a fatigue peen note onto a blast-for-appearance line.

Steel bar and plate $/kg planning bands sit in the common CNC carbon-steel range under **rates.v1.1** material tables; material cost is rarely the peen-pack story—zones, masks, and sequence are.

Sequence, masking, and intensity packaging

Name the order: machine, heat treat if any, peen, then plate or paint, unless the drawing places a size-critical grind after peen and says so. Mask threads, sealing faces, and bearing journals unless those areas are in the peened zone. If you require a coverage or intensity method, cite it on the PDF; do not ask the shop to invent an Almen value as a 3DWK process guarantee. Keep MPI or salt-spray notes on their own lines so NDT and corrosion tests are not mistaken for a peen.

Tolerance and inspection traps

Calling “shot peen as needed,” asking for “standard Almen” with no method or zone, or peening a thread and a sealing land that should have been masked, all force **needs_manual**. Default cosmetic parts to a named finish and skip the peen; reserve a cited method, zones, and masks for fatigue-critical faces. Related: [ISO 2768 general tolerances on CNC RFQs](https://3dwk.com/resources/iso-2768-general-tolerances-cnc-rfq), [what needs_manual means](https://3dwk.com/resources/what-needs-manual-means-preliminary-quote).

Illustration 1 shows an **Example part** steel bracket with labeled peen on faces A and C after heat treat, M8 threads and journal B masked, versus a cosmetic face D left to visual checks only.

Example part walkthrough

**Example part:** Heat-treated steel bracket ~80 × 50 × 8 mm, shot peen required on faces A and C after heat treat and before zinc plate, M8 threads and journal B masked, buyer-cited coverage and intensity method written on the PDF, ISO 2768-m general on the machined dimensions. With STEP + **SHOT PEEN ON A/C AFTER HT, BEFORE PLATE; MASK M8 AND JOURNAL B; METHOD CITED ON THE DRAWING**, expect a usable automatic planning band on [quote-new.php](https://3dwk.com/quote-new.php). Same geometry with silent “shot peen as needed, standard Almen” often lands DFM notes or **needs_manual**—without inventing any customer PO, Almen strip result, or a 3DWK-guaranteed intensity window.

Illustration 2 contrasts a vague RFQ (“peen as needed”) versus a labeled zone-mask-sequence-method pack and the clearer estimate path.

What widens bands fastest

Unlabeled “as needed” peens, a demand for Almen with no method or zone, threads left unmasked, and a peen demanded before the heat-treat state is named. Quantity breaks help unit minutes but do not erase peen-pack ambiguity—see [how quantity breaks change CNC unit cost](https://3dwk.com/resources/how-quantity-breaks-change-cnc-unit-cost) and [plating thickness versus tolerance](https://3dwk.com/resources/plating-thickness-cnc-tolerance-stack).

What to do next

Mark the RFQ with **required or not, peened faces, masks, sequence versus heat treat and plate, and the buyer-cited method if you need one**, then upload on [quote-new.php](https://3dwk.com/quote-new.php). Packaging checklist: heat-treat state first, then the peen pack, then any coating or NDT on its own line. Service pages: [CNC machining](https://3dwk.com/cnc-machining-service.php), [materials](https://3dwk.com/materials.php). Treat **rates.v1.1** min/mid/max as estimates, not invoices. If the UI shows **needs_manual**, answer the peen-pack questions rather than forcing a fake price.

Common questions

Is shot peening the same as a cosmetic bead blast?

No. A blast-for-appearance note is not a fatigue peen. If you need peening, say which faces, what is masked, and which method the drawing cites. If you only need a uniform look, say that instead.

Can 3DWK just use a standard Almen intensity?

Only if you cite the method and the intensity on the drawing. 3DWK will not invent an Almen value or a coverage percentage as a process guarantee. If your program needs a named method, write that method.

Where does peening sit versus heat treat and plating?

Usually after heat treat and before plate, with size-critical faces called out if a grind remains. Do not leave the order unstated, and do not hide the peen inside a heat-treat or coating line.

What should be masked?

Threads, sealing lands, and bearing journals are the usual keep-outs unless the drawing includes them. Write the masks. A peened thread or a peened O-ring land is a different part than the one you modeled.

Free DFM · 24h quote

Upload CAD → free DFM report

Email required. You get a link to a rule-based manufacturability checklist (not a formal engineering sign-off). Engineers still review pricing.

No CAD? Photo / description → 24h quote

Three fields only — we reply within 24 hours.

Next step

Questions about your design?

Upload CAD files and an engineer will review manufacturability with your quote.

Upload CAD