ABS
Common material for this finish.
View materialSurface Finishing
Wet Painting and Spray Coatings
Wet painting applies liquid paint by spray to metal or plastic parts. It allows close color matching, textures, and coatings on materials that cannot tolerate powder-coat curing temperatures.
Specification
Typical options
| Attribute | Typical range | Notes |
|---|---|---|
| Dry film thickness | ~25–75 µm per system | Primer plus topcoat typical |
| Color | RAL, Pantone, or sample match | Provide a physical sample for critical matches |
| Gloss | Flat, matte, satin, gloss | Specify gloss level |
| Substrates | Metals and plastics | Plastics may need adhesion promoter |
Typical industry ranges for reference. Final thickness, color, and specification are confirmed on your quote and drawing.
Design Tips
What to specify on your drawing
Pre-treatment
Surface preparation drives adhesion; metals are usually cleaned and primed.
Masking
Call out masked areas, threads, and grounding points.
Cosmetic grade
Define cosmetic surfaces and acceptable defects for inspection.
Specialty coatings
Soft-touch, conductive, or chemical-resistant paints can be requested.
Compatible Materials
Materials often paired with this finish
Aluminum 6061
Common material for this finish.
View materialSteel 1018
Common material for this finish.
View materialPolycarbonate
Common material for this finish.
View materialSurface Finishing Service
See all finishing and post-processing options.
View serviceAdd a Finish
Include finish requirements with your RFQ.
Note the finish, specification, color, thickness, and masked areas on your drawing so the quote reflects them.